Interplastic Corporation

Interplastic Announces New CoREZYN® NSF Approved Vinyl Ester Resin
Adhesives & Sealants

Interplastic Announces New CoREZYN® NSF Approved Vinyl Ester Resin

(St. Paul, MN - April 10, 2017) Interplastic Corporation today announced its new CoREZYN vinyl ester resin approved for use in potable (drinking) water pipe and tanks. CORVE8300DW is a corrosion resistant, vinyl ester based resin that is NSF/ANSI 61 certified. CORVE8300DW has the industry’s highest approval for use in piping greater than, or equal to, ½ inch inner diameter and tanks greater...

Read More »
Adhesives & Sealants

Interplastic Corporation to Exhibit at the Niagara Falls Trenchless Technology Road Show

St. Paul, MN – Interplastic Corporation announced that it will be showcasing its CoREZYN® Cured-In-Place Pipe resins at the 2016 Niagara Falls Trenchless Technology Road Show. The event will be taking place at the Scotiabank Convention Center, May 18 – 19, 2016, in Niagara Falls, Ontario Canada. At booth #305, Interplastic will feature its CIPP resin products. These resins have helped...

Read More »
Adhesives & Sealants

Green CIPP Resins eliminate environmental concerns.

With ECO Series Resins, partially or fully deteriorated underground pipes can be repaired with environmental safety in mind. Vinyl ester resins have no styrene, VOCs, or hazardous air pollutants. Resins meet ASTM F1216 requirements and minimize likelihood of stress cracking and shrinkage. In addition, products provide fast wet out and optimized flexural modulus properties.

Read More »
Paints & Coatings

Marine Gel Coating can be used above and below waterline.

Integrity(TM) High Performance Gel Coatings are formulated with high performance polymers, fillers, and light stabilizers that provide UV resistance, color and gloss retention, water resistance, and crack resistance. They are easy to spray on and resist sagging and weathering. Integrity gel coat meets EPA Maximum Achievable Control Technology (MACT) standards for composites manufacturing.

Read More »
Adhesives & Sealants

Unsaturated Polyester Resins have eco-friendly formulation.

Featuring 5.5% rapidly renewable and 15% post-consumer recycled content, Silmar® resins include SIL90BA-220ECO for general-purpose cast marble applications and SIL93BE-330ECO, which is acrylic modified and contains UV stabilizers for solid surface applications. SIL90BA-585ECO offers rapidly renewable content of 26%. All 3 unsaturated polyester resins feature optimal thermal shock...

Read More »
People in the News

Scott Rinehart Joins Interplastic Corporation as Regional Sales Manager

(St. Paul, MN – January 7, 2019) Steve Wetzel, Vice President of Sales announced that Scott Rinehart has joined the Interplastic Corporation sales team as a Regional Sales Manager. Scott will be responsible for managing sales covering the North Central states and Florida. Scott brings 25 years of composites experience to this position. He began his career as the general manager of a family...

Read More »
People in the News

Martin Henricks Joins Interplastic Corporation as Regional Sales Manager

(St. Paul, MN – November 26, 2018) Steve Wetzel, Vice President of Sales announced that Martin Henricks has joined the Interplastic Corporation sales team as a Regional Sales Manager. Martin will be responsible for managing sales covering the western states. Martin comes to Interplastic with 30 years of industry experience in composites, adhesives and coatings. His most recent position as...

Read More »
Company News

Interplastic Corporation & Structural Composites Incorporated Partner to Promote Advanced Marine Coatings™ with CoCure™ Technology

(St. Paul, MN – September 27, 2018) Interplastic Corporation and Structural Composites Incorporated (SC) have formed a partnership to market Advanced Marine Coatings™. This product line uses Structural Composites Inc’s CoCure™ technology bringing the functionality of urethane chemistry to gel coats, allowing a higher performing product with regard to flexibility, weatherability and...

Read More »
Company News

Interplastic Corporation Announces 2018 Scholars Award Winners

(St. Paul, MN – July 19th, 2018) Reagan Stephens, IP Corporation’s Chief Operating Officer, today announced the 2018 recipients of the Scholars Award sponsored by Interplastic Corporation in affiliation with the American Composites Manufacturers Association (ACMA) and the International Cast Polymer Association (ICPA). The six well-deserving high school graduates and their company affiliations...

Read More »
People in the News

Interplastic Corporation Management Reorganization

(St. Paul, MN – April 24, 2018) Effective May 1, 2018 Interplastic Corporation announced the reorganization of some of its Management staffs. This reorganization will prepare Interplastic for our next phase of growth while striving to better support our customers. Two new Vice President positions will lead the Interplastic commercial teams: Steve Wetzel, Vice President of Sales; and Peter...

Read More »
People in the News

IP Corporation Announces Bob DeRoma Retirement

(St. Paul, MN – April 19, 2018) Following a distinguished career of more than 30 years IP Corporation announced today that Senior Vice President Bob DeRoma is retiring May 1 and will be supporting the Corporation in strategic assignments. “Over the past 30 years, Bob oversaw dramatic growth across IP Corporation. When Bob arrived, Interplastic was a 2-manufacturing plant operation and now...

Read More »
Company News

Interplastic Corporation Announces 2018 Scholars Award Program

(St. Paul, MN – April 4, 2018) Interplastic Corporation today announced the launch of the 2018 Scholars Award Program sponsored by Interplastic Corporation in affiliation with the American Composites Manufacturers Association (ACMA) and The International Cast Polymer Association (ICPA) . To be eligible for a Scholars Award, the applicant’s parents, legal guardian, or the student must be...

Read More »
Interplastic Announces New CoREZYN® NSF Approved Vinyl Ester Resin
Adhesives & Sealants

Interplastic Announces New CoREZYN® NSF Approved Vinyl Ester Resin

(St. Paul, MN - April 10, 2017) Interplastic Corporation today announced its new CoREZYN vinyl ester resin approved for use in potable (drinking) water pipe and tanks. CORVE8300DW is a corrosion resistant, vinyl ester based resin that is NSF/ANSI 61 certified. CORVE8300DW has the industry’s highest approval for use in piping greater than, or equal to, ½ inch inner diameter and tanks greater...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers