Elmo Motion Control, Inc.

Serco Drives are built to survive environmental extremes.
Controls & Controllers

Serco Drives are built to survive environmental extremes.

Comprised of intelligent digital servo drives and analog servo amplifiers, ExtrIQ series operates over -40 to +70°C range and withstands humidity, unlimited altitude, vibration levels over 15G, and mechanical shock. Products are based on SimplIQ technology, which provides feedback options, programming capabilities, communications protocols, and fully digital motion controller. In operating...

Read More »
Digital Servo Drive supports up to 6 A of continuous power.
Controls & Controllers

Digital Servo Drive supports up to 6 A of continuous power.

Available in 3 models, Didge Servo Drive provides up to 12 A peak power in metal, non-ventilated industrial assembly. It operates in current, velocity, position, or advanced position modes for ac/dc brushless or brush motors, linear motors, or voice coils. Drive can also operate in trapezoidal or sinusoidal commutation with vector control as stand-alone unit or as part of distributed multi-axis...

Read More »
Servo Amplifier controls dc brush and brushless motors.
Communication Systems & Equipment

Servo Amplifier controls dc brush and brushless motors.

Castanet .76 oz current mode servo amplifier operates from dc power source and features greater than 4 kHz current loop bandwidth. External power supplies support 7.5-96 V operation, and 60 V Castanet furnishes continuous current level to 3.3 A (60 V input) while 100 V model provides 2.5 A. Amplifier delivers 330 W peak and 180 W continuous. Operating as current mode standalone device or integral...

Read More »
Elmo Motion Control Announces Availability of Next Generation Maestro
Agricultural & Farming Products

Elmo Motion Control Announces Availability of Next Generation Maestro

Elmo's Multi-Axis Supervisor Includes New Firmware for DS402 and DS305 Protocol Support and CAN Network IO Integration Westford, MA, April 5, 2006 - Elmo Motion Control, Inc. today announced availability of the latest release of its Maestro Multi-Axis Supervisor with rich new features and a fuller command set. The new version includes new firmware which enables the Maestro to support the DS305...

Read More »
Controls & Controllers

Digital Servo Drive features matchbox-sized design.

Measuring 2 x 1.8 x 0.6 in., Whistle delivers up to Â-½ kW of continuous power at up to 99% efficiency. Unit is small enough to be mounted to motor housing or close to motor. Seven models are available ranging from 1 A, 60 V to 5 A, 100 V continuous. Designed for any type of sinusoidal or trapezoidal current control, Whistle interfaces to brush DC, brushless PM, linear, and/or voice coil...

Read More »
Motion Controller monitors multiple axes over network.
Agricultural & Farming Products

Motion Controller monitors multiple axes over network.

Maestro Multi-Axis Motion Supervisor provides synchronized motion control, interpolated 2D/3D, as well as sequencer controlling event handling of axis and I/O as CANopen master. It operates as Ethernet-CAN gateway, delivering direct access to axis level for setup, real-time monitoring, and analysis. Network-based tool comes with single or dual CANopen ports for control of up to 126 axes and 2-16...

Read More »
Agricultural & Farming Products

Motion Control System operates as Ethernet-CAN gateway.

Network-based multi-axis motion supervisor, Maestro, provides for multi-axis synchronized motion control and interpolated 2D/3D while also acting as sequencer controlling event handling. Available with single or dual CANopen ports, unit allows control of up to 126 axes and 2-16 axis of interpolated motion per CAN bus port. As CANopen master, Maestro offers network management, clock...

Read More »
Digital Servo Drive outputs up to 10.0 kW @ 20 A/460 V.
Controls & Controllers

Digital Servo Drive outputs up to 10.0 kW @ 20 A/460 V.

With output power ratings starting at 3.32 kW @ 12 A/230 V, SimplIQ Tuba is offered in six 9.7 x 7.4 x 3.6 in. models. Each features built-in power supply that provides direct ac input from 115-460 Vac @ 50/60 Hz. Operating network functionalities include CANopen DS301, and binary interpreter enables simultaneous CANopen and serial RS232 communications. Intelligent drives come with programmable...

Read More »
Digital Servo Drive provides up to 6 kW peak power.
Controls & Controllers

Digital Servo Drive provides up to 6 kW peak power.

Cornet drives have built-in power supply, feedback options, and communications protocols. Delivering up to 3 kW continuous power, they incorporate feedback signal processing capability for incremental encoders, analog sin/cos encoders, and resolvers. Available in 6 models, from 1,370 W model No. 5/230 to 3,070 W model No. 6/460, drive family incorporates up to 32 Kb user-programmable memory for...

Read More »
Controls & Controllers

DC Digital Drives deliver 3 kW of continuous power.

Cello Servo Drives can operate in current, velocity, or position modes and function with variety of feedback options. They feature sinusoidal vector control, trapezoidal vector control, trapezoidal 6-step, and DC commutation methods. Two CANopen ports are installed along with one RS-232 serial port for communications. Models range from 2.25-15 A, at 3 nominal input voltage levels of 48, 85, and...

Read More »

All Topics