Optotherm, Inc.

OptoTherm Introduces IR LabMate Infrared Camera
Optics & Photonics

OptoTherm Introduces IR LabMate Infrared Camera

OptoTherm, Inc. has released an affordable thermal imaging camera that can be used in product design and development.Â- Ã‚  The camera system includes the IR LabMate thermal imaging camera, required cables, and Thermalyze image analysis software.  The IR LabMate camera utilizes a 320x240 array detector, has a temperature sensitivity of 0.08°C, uses an Ethernet interface,...

Read More »
Thermoelectric Controller covers -40 to +250°C range.
Controls & Controllers

Thermoelectric Controller covers -40 to +250°C range.

OptoTherm HP20 enables ±0.01°C accuracy temperature control of thermoelectric modules and heating/cooling stages. Providing output current of up to 20 A at 12 Vdc, unit operates in bidirectional, H-bridge configuration, simplifying transitions between heating and cooling cycles. Front panel pushbutton interface allows manual operation, and when connected to PC, setpoint and actual...

Read More »
Thermal Imaging System includes 320 x 240 element camera.
Test & Measurement

Thermal Imaging System includes 320 x 240 element camera.

Micro system is offered with thermal imaging camera featuring 320 x 240 element, uncooled detector; 0.05°C sensitivity; 20 Â-µm microscopic lens; wide-angle lens; and 16-bit digital Camera Link interface. Additionally, system elements include tower computer and monitor, vertical camera stage, xy table, thermal chuck with controller, and I/O relay module. System is suited for...

Read More »
Functional Tester has environmental enclosure.
Test & Measurement

Functional Tester has environmental enclosure.

Featuring 27 x 27 x 45 in. enclosure that provides stable test environment by blocking energy emitted by ambient environment and blocking air currents generated by heating and air conditioning ducts, EL system can verify PCBA functionality. Tester detects and locates PCBA defects such as short circuits and stressed components. Motorized camera slide and controller precisely position EL camera for...

Read More »
Thermal Imaging Camera is designed for R&D applications.
Optics & Photonics

Thermal Imaging Camera is designed for R&D applications.

Offering measurement temperature range of 0-300°C, Infrasight RD320 captures and displays images at rate of 30 fps, and provides pixel resolution of down to 70 microns. It utilizes 320 x 240 uncooled detector array with less than 0.05°C sensitivity and 16 bit digital Camera Link interface. Equipped with cables, Camera Link video board, and Thermalyze LT image analysis software, unit...

Read More »
Optics & Photonics

Thermal Imaging System includes microscopic camera.

Equipped with 16 bit digital camera link interface and microscopic lens with 20 Â-µm spatial resolution, Micro thermal imaging system detects shorts/defects on semiconductor devices and small circuit boards. It can also measure junction temperature, identify die bonding defects, and measure packaged die thermal resistance. Thermal stage provides both heating/cooling for precise device...

Read More »
PCB Test Arm Probe connects test instruments to SMDs.
Fluid & Gas Flow Equipment

PCB Test Arm Probe connects test instruments to SMDs.

PCB Test Arm Probe provides probing of surface mount devices (SMDs), and connects test instruments to variety of SMDs including PLCC, SOIC, QFP, and VIAS or test point holes. With length of 8.33 in., height of 2.92 in., and base length of 2.53 in., it includes spring loaded tip, rotatable head, and fine vertical adjustment knob, and is available in 3 and 10 A models. Connection post supports...

Read More »
PCB Testing Kit helps debug existing systems.
Fluid & Gas Flow Equipment

PCB Testing Kit helps debug existing systems.

Designed to provide new or additional test points on printed circuit boards (PCBs), PCB Probe Kit offers functionality for probing and viewing signals on logic analyzer, oscilloscope, meter, or other instrument. Hands-free system includes arm probe with heavy base, spring loaded tip, rotatable head, and fine vertical adjustment knob. Kit also includes lead clips, SMD clips, SMD clip support with...

Read More »
Camera Positioning Arm offers adjustable articulation.
Mounting & Attaching Products

Camera Positioning Arm offers adjustable articulation.

Pneumatically balanced arm mounts to top or edge of bench and allows camera to be positioned in any orientation. Featuring 18 in. vertical range and 27 in. horizontal range, product is suited for use when analyzing objects of various sizes over wide range of focus distances. Tension can be adjusted to accommodate different weights, and ease of rotation at all joints and pivots can also be...

Read More »
OptoTherm Introduces IR LabMate Infrared Camera
Optics & Photonics

OptoTherm Introduces IR LabMate Infrared Camera

OptoTherm, Inc. has released an affordable thermal imaging camera that can be used in product design and development.Â- Ã‚  The camera system includes the IR LabMate thermal imaging camera, required cables, and Thermalyze image analysis software.  The IR LabMate camera utilizes a 320x240 array detector, has a temperature sensitivity of 0.08°C, uses an Ethernet interface,...

Read More »
Thermoelectric Controller covers -40 to +250°C range.
Controls & Controllers

Thermoelectric Controller covers -40 to +250°C range.

OptoTherm HP20 enables ±0.01°C accuracy temperature control of thermoelectric modules and heating/cooling stages. Providing output current of up to 20 A at 12 Vdc, unit operates in bidirectional, H-bridge configuration, simplifying transitions between heating and cooling cycles. Front panel pushbutton interface allows manual operation, and when connected to PC, setpoint and actual...

Read More »
Thermal Imaging System includes 320 x 240 element camera.
Test & Measurement

Thermal Imaging System includes 320 x 240 element camera.

Micro system is offered with thermal imaging camera featuring 320 x 240 element, uncooled detector; 0.05°C sensitivity; 20 Â-µm microscopic lens; wide-angle lens; and 16-bit digital Camera Link interface. Additionally, system elements include tower computer and monitor, vertical camera stage, xy table, thermal chuck with controller, and I/O relay module. System is suited for...

Read More »
Functional Tester has environmental enclosure.
Test & Measurement

Functional Tester has environmental enclosure.

Featuring 27 x 27 x 45 in. enclosure that provides stable test environment by blocking energy emitted by ambient environment and blocking air currents generated by heating and air conditioning ducts, EL system can verify PCBA functionality. Tester detects and locates PCBA defects such as short circuits and stressed components. Motorized camera slide and controller precisely position EL camera for...

Read More »
Thermal Imaging Camera is designed for R&D applications.
Optics & Photonics

Thermal Imaging Camera is designed for R&D applications.

Offering measurement temperature range of 0-300°C, Infrasight RD320 captures and displays images at rate of 30 fps, and provides pixel resolution of down to 70 microns. It utilizes 320 x 240 uncooled detector array with less than 0.05°C sensitivity and 16 bit digital Camera Link interface. Equipped with cables, Camera Link video board, and Thermalyze LT image analysis software, unit...

Read More »
Optics & Photonics

Thermal Imaging System includes microscopic camera.

Equipped with 16 bit digital camera link interface and microscopic lens with 20 Â-µm spatial resolution, Micro thermal imaging system detects shorts/defects on semiconductor devices and small circuit boards. It can also measure junction temperature, identify die bonding defects, and measure packaged die thermal resistance. Thermal stage provides both heating/cooling for precise device...

Read More »
PCB Test Arm Probe connects test instruments to SMDs.
Fluid & Gas Flow Equipment

PCB Test Arm Probe connects test instruments to SMDs.

PCB Test Arm Probe provides probing of surface mount devices (SMDs), and connects test instruments to variety of SMDs including PLCC, SOIC, QFP, and VIAS or test point holes. With length of 8.33 in., height of 2.92 in., and base length of 2.53 in., it includes spring loaded tip, rotatable head, and fine vertical adjustment knob, and is available in 3 and 10 A models. Connection post supports...

Read More »
PCB Testing Kit helps debug existing systems.
Fluid & Gas Flow Equipment

PCB Testing Kit helps debug existing systems.

Designed to provide new or additional test points on printed circuit boards (PCBs), PCB Probe Kit offers functionality for probing and viewing signals on logic analyzer, oscilloscope, meter, or other instrument. Hands-free system includes arm probe with heavy base, spring loaded tip, rotatable head, and fine vertical adjustment knob. Kit also includes lead clips, SMD clips, SMD clip support with...

Read More »
Camera Positioning Arm offers adjustable articulation.
Mounting & Attaching Products

Camera Positioning Arm offers adjustable articulation.

Pneumatically balanced arm mounts to top or edge of bench and allows camera to be positioned in any orientation. Featuring 18 in. vertical range and 27 in. horizontal range, product is suited for use when analyzing objects of various sizes over wide range of focus distances. Tension can be adjusted to accommodate different weights, and ease of rotation at all joints and pivots can also be...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers