Proceq USA, Inc.

Pull-Off Testers store complete record of test.
Test & Measurement

Pull-Off Testers store complete record of test.

Designed to facilitate operation, DY-2 pull-off testers have integrated, feedback-controlled motor and provide fully automated test at constant load rate. Load rate and all test results required by application are recorded to ensure standards compliance, and mode of failure can be recorded along with test result. Suited for field testing applications, portable testers offer automatic...

Read More »
Fluid & Gas Flow Equipment

Surface Resistivity Instrument can carry out BR test.

Using plate electrodes on each end of sample, Resipod Bulk Resistivity (BR) Model evaluates resistance ofÂ- concrete cylinder. Unit comes with necessary accessories for carrying out bulk resistivity (BR) test. This fully integrated 4-point Wenner probe uses non-destructive test method and yields results within minutes. Supplied in waterproof housing designed to float, instrument meets AASHTO...

Read More »
Fluid & Gas Flow Equipment

Concrete Surface Resistivity Meter performs non-destructive test.

Able to yield results within minutes, Resipod 4-point Wenner probe measures electrical resistivity of concrete or rock. Portable field unit meets AASHTO provisional standard TP95-11 and is available with 1.5 or 2 in. probe. In addition to indicating current flow, poor contact status, and variations in water/cement ratios, commercial product can identify areas susceptible to chloride penetration....

Read More »
Test & Measurement

Moisture Meter provides relative humidity testing of concrete.

Featuring 2 independent probe inputs, Hygropin can gather simultaneous readings from both in-situ probe and ambient probe. In-situ probe requires only 8 mm diameter hole at test site and reaches stable values within 5 minutes. Providing detailed data recording with capacity for up to 10,000 measurement logs, meter includes trend indicators that display when stable measuring values are reached,...

Read More »
Test & Measurement

Ultrasonic Concrete Tester offers integrated waveform display.

Along with transit time and pulse velocity measurement, Pundit® Lab measures path length, perpendicular crack depth, and surface velocity. Waveform display can be viewed directly on instrument, allowing trigger point to be set manually on site, which is useful when measuring with exponential transducers. Portable non-destructive tester stores more than 500 values in memory and supports...

Read More »
Portable Metal Hardness Testers suit on-site hardness checks.
Test & Measurement

Portable Metal Hardness Testers suit on-site hardness checks.

Featuring single loading-release mechanism, Equotip Piccolo 2/Bambino 2 deliver measuring time of less than 2 sec per reading and come with automatic compensation for impact directions. Piccolo 2 offers advanced measurement statistics, real-time monitoring, user defined hardness conversion curves, and comes with Piccolink PC software for data analysis, editing, and exporting to reports. Suited...

Read More »
Test & Measurement

Rebound Hammer is designed for paper roll hardness testing.

Fully compliant with TAPPI T834 om-07 standard used to regulate roll hardness testing, PaperSchmidt instantly displays all key parameters required for assessing quality of paper rolls. Measurement principle, independent of angle of impact, lends to optimized roll-profiling accuracy and repeatability, while intuitive and language-independent UI facilitates operation. For extended life in...

Read More »
Pull-Off Tester determines adhesion strength of coatings.
Test & Measurement

Pull-Off Tester determines adhesion strength of coatings.

Combining adjustable tripod base with manual hydraulic loading system and direct-reading, digital pressure gauge, DYNA Series determines adhesion strength of coatings on concrete surfaces and tensile strength of concrete repairs. Integrated gauge features user-selectable display of applied forces in English or Metric units, as well as directly in tensile stress, based on 2 in. test area....

Read More »
Mining, Oil Drilling, Refining Products & Equipment

Rebar Detector also measures cover depth, rebar diameter.

Able to meet construction and building industry needs, Profoscope provides both visual and acoustic indications of what lies directly beneath concrete surface. Positioning of electromagnetic coils allows symmetrical triangulation of rebar configuration, telling operator if instrument is located between 2 rebars or directly on top of one. Ergonomically designed instrument, which can be operated...

Read More »
Handheld Instrument locates rebar in concrete structures.
Mining, Oil Drilling, Refining Products & Equipment

Handheld Instrument locates rebar in concrete structures.

Promoting working efficiency and safety for sawing and drilling contractors, Profoscope is used to determine rebar location, cover depth, rebar diameter, and mid-point between 2 neighboring rebars. Cordless solution, which runs on 2 AA batteries, features 2-key function for programming, location, and navigation. Offering visual and acoustic indication, ergonomic unit locates rebar beneath...

Read More »
Pull-Off Testers store complete record of test.
Test & Measurement

Pull-Off Testers store complete record of test.

Designed to facilitate operation, DY-2 pull-off testers have integrated, feedback-controlled motor and provide fully automated test at constant load rate. Load rate and all test results required by application are recorded to ensure standards compliance, and mode of failure can be recorded along with test result. Suited for field testing applications, portable testers offer automatic...

Read More »
Fluid & Gas Flow Equipment

Surface Resistivity Instrument can carry out BR test.

Using plate electrodes on each end of sample, Resipod Bulk Resistivity (BR) Model evaluates resistance ofÂ- concrete cylinder. Unit comes with necessary accessories for carrying out bulk resistivity (BR) test. This fully integrated 4-point Wenner probe uses non-destructive test method and yields results within minutes. Supplied in waterproof housing designed to float, instrument meets AASHTO...

Read More »
Fluid & Gas Flow Equipment

Concrete Surface Resistivity Meter performs non-destructive test.

Able to yield results within minutes, Resipod 4-point Wenner probe measures electrical resistivity of concrete or rock. Portable field unit meets AASHTO provisional standard TP95-11 and is available with 1.5 or 2 in. probe. In addition to indicating current flow, poor contact status, and variations in water/cement ratios, commercial product can identify areas susceptible to chloride penetration....

Read More »
Test & Measurement

Moisture Meter provides relative humidity testing of concrete.

Featuring 2 independent probe inputs, Hygropin can gather simultaneous readings from both in-situ probe and ambient probe. In-situ probe requires only 8 mm diameter hole at test site and reaches stable values within 5 minutes. Providing detailed data recording with capacity for up to 10,000 measurement logs, meter includes trend indicators that display when stable measuring values are reached,...

Read More »
Test & Measurement

Ultrasonic Concrete Tester offers integrated waveform display.

Along with transit time and pulse velocity measurement, Pundit® Lab measures path length, perpendicular crack depth, and surface velocity. Waveform display can be viewed directly on instrument, allowing trigger point to be set manually on site, which is useful when measuring with exponential transducers. Portable non-destructive tester stores more than 500 values in memory and supports...

Read More »
Company News

Visit Proceq at the World of Concrete 2010

The Proceq team looks forward to seeing you at the World of Concrete 2010, showcasing our complete line of non-destructive concrete testing instruments. Established in 1954, the Switzerland-based firm is known globally as being at the technological forefront of concrete testing applications and instrumentation, including: Concrete test hammers Corrosion analysis instruments Rebar detection...

Read More »
Portable Metal Hardness Testers suit on-site hardness checks.
Test & Measurement

Portable Metal Hardness Testers suit on-site hardness checks.

Featuring single loading-release mechanism, Equotip Piccolo 2/Bambino 2 deliver measuring time of less than 2 sec per reading and come with automatic compensation for impact directions. Piccolo 2 offers advanced measurement statistics, real-time monitoring, user defined hardness conversion curves, and comes with Piccolink PC software for data analysis, editing, and exporting to reports. Suited...

Read More »
Test & Measurement

Rebound Hammer is designed for paper roll hardness testing.

Fully compliant with TAPPI T834 om-07 standard used to regulate roll hardness testing, PaperSchmidt instantly displays all key parameters required for assessing quality of paper rolls. Measurement principle, independent of angle of impact, lends to optimized roll-profiling accuracy and repeatability, while intuitive and language-independent UI facilitates operation. For extended life in...

Read More »
Pull-Off Tester determines adhesion strength of coatings.
Test & Measurement

Pull-Off Tester determines adhesion strength of coatings.

Combining adjustable tripod base with manual hydraulic loading system and direct-reading, digital pressure gauge, DYNA Series determines adhesion strength of coatings on concrete surfaces and tensile strength of concrete repairs. Integrated gauge features user-selectable display of applied forces in English or Metric units, as well as directly in tensile stress, based on 2 in. test area....

Read More »
Mining, Oil Drilling, Refining Products & Equipment

Rebar Detector also measures cover depth, rebar diameter.

Able to meet construction and building industry needs, Profoscope provides both visual and acoustic indications of what lies directly beneath concrete surface. Positioning of electromagnetic coils allows symmetrical triangulation of rebar configuration, telling operator if instrument is located between 2 rebars or directly on top of one. Ergonomically designed instrument, which can be operated...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers