CDM Electronics, Inc.
Turnersville, NJ 08012-1200
New Coaxial Cable Cutter Tool with Safety Locking Mechanism
CCT-03 ensures cables are accurately and consistently prepared to optimize connector termination. Automatically slices through cable jacket, outer braid, foam dielectric and scribes the center conductor prior to snapping it to complete the cutting process. Ideally suited to cut RG standard coaxial cable with a solid center conductor and a diameter of ≤ 0.600”.
Read More »New Coaxial Cable Cutter Tool with Safety Locking Mechanism
CCT-03 ensures cables are accurately and consistently prepared to optimize connector termination. Automatically slices through cable jacket, outer braid, foam dielectric and scribes the center conductor prior to snapping it to complete the cutting process. Ideally suited to cut RG standard coaxial cable with a solid center conductor and a diameter of ≤ 0.600”.
Read More »CDM Distributes Sumitag Marking Systems for Robust Cable Identification and Insulation Applications
Marker Sleeves are available in standard lengths of 1/2”, 1”, 2” and in diameters from 3/32” to 1-1/2”. Provides enhanced interconnect strain relief, fluid resistance, abrasion protection and insulation. Conforms to SAE specifications AMS-DTL 23053/5, AMS-DTL 23053/6 or AMS DTL 23053/18 and are suitable for extensive array of mission-critical applications.
Read More »CDM Distributes Sumitag Marking Systems for Robust Cable Identification and Insulation Applications
Marker Sleeves are available in standard lengths of 1/2”, 1”, 2” and in diameters from 3/32” to 1-1/2”. Provides enhanced interconnect strain relief, fluid resistance, abrasion protection and insulation. Conforms to SAE specifications AMS-DTL 23053/5, AMS-DTL 23053/6 or AMS DTL 23053/18 and are suitable for extensive array of mission-critical applications.
Read More »New Cables from CDM Electronics Meet all State and Federal Building Code Requirements
CDM Electronics’ new LMR-LLPX series of flexible low loss plenum coaxial cables have a UL/NEC and CSA rating of CMP and FT6. They are offered in sizes of 195 to 1200 and have same low attenuation, flexibility, and bendability. The cables are supplied with a fluoropolymer red jacket to meet the requirements for red jacketed coax cable employed in public safety and in-building applications. The...
Read More »New Cables from CDM Electronics Meet all State and Federal Building Code Requirements
CDM Electronics’ new LMR-LLPX series of flexible low loss plenum coaxial cables have a UL/NEC and CSA rating of CMP and FT6. They are offered in sizes of 195 to 1200 and have same low attenuation, flexibility, and bendability. The cables are supplied with a fluoropolymer red jacket to meet the requirements for red jacketed coax cable employed in public safety and in-building applications. The...
Read More »CDM's Comprehensive Portfolio of Interconnect Solutions Supports Most Recent Positive Train Control (PTC) Initiatives
Semi-Custom and Custom RF/Coaxial and Ethernet Assemblies Offered with Low-Smoke Zero-Halogen Option, and Lightning and Surge Protection Products NJ, July 14, 2017 - CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of a comprehensive array of semi-custom and custom cable assemblies optimized to meet the latest requirements of...
Read More »CDMâ™s Comprehensive Portfolio of Interconnect Solutions Supports Most Recent Positive Train Control (PTC) Initiatives
Semi-Custom and Custom RF/Coaxial and Ethernet Assemblies Offered with Low-Smoke Zero-Halogen Option, and Lightning and Surge Protection Products NJ, July 14, 2017 - CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of a comprehensive array of semi-custom and custom cable assemblies optimized to meet the latest requirements of...
Read More »CDM Electronics Now Stocks the Latest Generation of Eaton's Micro-Military Circular Connectors
Ruggedized Connectors Deliver Unparalleled Performance in Mission-Critical Military and Aerospace Applications Turnersville, NJ, April 26, 2017 - Announced today by CDM Electronics, a premier authorized distributor of electronic connectors and cables, is the availability of the latest generation of Eaton's Micro-Military Circular Connector Series with shell diameters as small as 0.43” (11 mm)....
Read More »CDM Electronics Now Stocks the Latest Generation of Eaton's Micro-Military Circular Connectors
Ruggedized Connectors Deliver Unparalleled Performance in Mission-Critical Military and Aerospace Applications Turnersville, NJ, April 26, 2017 - Announced today by CDM Electronics, a premier authorized distributor of electronic connectors and cables, is the availability of the latest generation of Eaton's Micro-Military Circular Connector Series with shell diameters as small as 0.43” (11 mm)....
Read More »CDM Promotes Christina Harrison To Materials Manager
Turnersville, NJ, January 28, 2021...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today promoted Christina Harrison to Materials Manager, effective immediately. The announcement was made by Lori Maeder, CDM Executive Vice President, to whom she reports directly. Throughout Christinas 9-year tenure at CDM, her meticulous attention to detail,...
Read More »CDM Promotes Christina Harrison To Materials Manager
Turnersville, NJ, January 28, 2021...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today promoted Christina Harrison to Materials Manager, effective immediately. The announcement was made by Lori Maeder, CDM Executive Vice President, to whom she reports directly. âThroughout Christinaâs 9-year tenure at CDM, her meticulous attention to detail,...
Read More »Sumitomo's New SumiMark IV Plus Thermal Transfer Printer Now Distributed by CDM Electronics
System Optimized for Aerospace, Military and Mass Transit Cables and Assemblies Turnersville, NJ, October 15, 2020...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of the Sumitomo Electric Interconnect Products, Inc. SumiMark IV PLUS high-performance thermal transfer printer. The stand-alone system, which does not require a...
Read More »Sumitomoâ™s New SumiMark IV Plus Thermal Transfer Printer Now Distributed by CDM Electronics
System Optimized for Aerospace, Military and Mass Transit Cables and Assemblies Turnersville, NJ, October 15, 2020...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the availability of the Sumitomo Electric Interconnect Products, Inc. SumiMark IV PLUS high-performance thermal transfer printer. The stand-alone system, which does not require a...
Read More »CDM Electronics Achieves Nadcap Accreditation
Recognition Certifies CDM’s Commitment to the Global Aerospace and Defense Industry Logistics and Supply Chain Turnersville, NJ, September 29, 2020...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced its Turnersville, NJ headquarters has again received Nadcap (National Aerospace and Defense Contractors Accreditation) accreditation from the...
Read More »CDM Electronics Achieves Nadcap Accreditation
Recognition Certifies CDM’s Commitment to the Global Aerospace and Defense Industry Logistics and Supply Chain Turnersville, NJ, September 29, 2020...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced its Turnersville, NJ headquarters has again received Nadcap (National Aerospace and Defense Contractors Accreditation) accreditation from the...
Read More »CDM Electronics Shipped its 1,000,000th Value-added Cable Assembly
Engineered Interconnects Certified to All ISO and Military Specifications Turnersville, NJ, September 15, 2020...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the shipment of the 1,000,000th value-added cable assembly from its Turnersville, NJ headquarters. The facility, which notably houses the Company’s state-of-the-art Quality...
Read More »CDM Electronics Shipped its 1,000,000th Value-added Cable Assembly
Engineered Interconnects Certified to All ISO and Military Specifications Turnersville, NJ, September 15, 2020...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the shipment of the 1,000,000th value-added cable assembly from its Turnersville, NJ headquarters. The facility, which notably houses the Company’s state-of-the-art Quality...
Read More »CDM Expands Times Microwave Systems Regional Hub in Richardson, Texas
Broad Interconnect Inventory Targets Aerospace/Defense, Telecom and Medical Applications Turnersville, NJ, June 23, 2020...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the opening of a newly expanded 8,400 square-foot Times Microwave Systems Midwest regional hub in Richardson, Texas. The new facility is designed from-the-ground-up to...
Read More »CDM Expands Times Microwave Systems Regional Hub in Richardson, Texas
Broad Interconnect Inventory Targets Aerospace/Defense, Telecom and Medical Applications Turnersville, NJ, June 23, 2020...CDM Electronics, a premier authorized distributor of electronic connectors and cables, today announced the opening of a newly expanded 8,400 square-foot Times Microwave Systems Midwest regional hub in Richardson, Texas. The new facility is designed from-the-ground-up to...
Read More »