E Instruments International

Dry Block and Liquid Bath Calibrator stabilizes in 10 mins.
Test & Measurement

Dry Block and Liquid Bath Calibrator stabilizes in 10 mins.

With operating temperature in range of -55°C to 140°C and stabilization time of 10 mins, TCS140 is suited for calibrating glass thermometers and short thermocouples and thermoresistors. Stability for dry block is ±0.035°C and for liquid bath is ±0.02°C, while radial uniformity for dry block is ±0.02°C and for liquid bath is ±0.004°C....

Read More »
Portable Moisture Meter can test variety of building materials.
Test & Measurement

Portable Moisture Meter can test variety of building materials.

Model HM100 Pin Moisture Meter is capable of measuring moisture levels in softwood (birch, beech, spruce, walnut, cherry tree, larch), hardwood (oak, pine, ash, maple), as well as concrete, plaster, and bricks. Easy to use meter shows minimum and maximum values on large blue LCD display and comes with protection cap and extra set of pins. Applications include indoor air quality (IAQ), HVAC, home...

Read More »
Non-Contact IR Thermometer enables safe temperature measurement.
Health, Medical, & Dental Supplies and Equipment

Non-Contact IR Thermometer enables safe temperature measurement.

Measuring 145 x 95 x 40 mm, KiRay 100 offers dual laser sighting and can be used to diagnose, inspect, and check temperatures from -58 to +1,472°F. Spectral response is 150 msec, and emissivity is adjustable from 0.10 to 1.0 (pre-set at 0.95). Powered by 9 V battery, portable unit features 4-digit LCD backlit display and provides Hold function, Max/Min/Difference functions, and High/Low...

Read More »
Portable Combustible Gas Sniffer has range from 0-10,000 ppm.
Safety & Security Equipment

Portable Combustible Gas Sniffer has range from 0-10,000 ppm.

Featuring 11 in. fully flexible probe for hard-to-reach places, hand-held Model 7899 is equipped with highly sensitive tip to pin-point small leaks of any combustible gases and hydrocarbons from piping and/or appliances. Quick response leak detector features auto zero-drift adjustment, audio alarm, HOLD function, and large visual LCD and bar graph display. Readings are provided in ppm, %vol, and...

Read More »
Humidity/Temperature Transmitter offers on-site calibration.
Electrical Equipment & Systems

Humidity/Temperature Transmitter offers on-site calibration.

Capable of measuring from 0-100% RH and -40 to +356°F, TH300 includes functions for relative and absolute humidity, dew point, wet and dry temperature, and enthalpy. It can display 1-4 parameters simultaneously, and features Smart-Pro system interchangeable probes (PC or Stainless Steel). Other features include 2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6 A/230 Vac, external...

Read More »
Vane Thermo-Anemometer features large backlit LCD display.
Test & Measurement

Vane Thermo-Anemometer features large backlit LCD display.

Suited for laboratory, clean room, and air balancing applications, hand held LV110 measures air velocity from 0-8,000 fpm, with 0.01 resolution and adjustable shut off. Unit features 4 in. fixed probe, ice blue 128 x 128 pixel display with max, min, and hold functions, and unit selection in m/sec or fps. Shock proof housing measures 5 x 2.5 x 1.25 in., and device runs on 9 V battery (included).

Read More »
Handheld Calibrator measures 8 types of thermocouples.
Test & Measurement

Handheld Calibrator measures 8 types of thermocouples.

Simulating both voltage and thermocouple readings, SignalCal 2 T/C measures R, S, B, E, K, J, T, and N thermocouples with accuracy of ±0.05%. Measuring function allows for input range of -10 to 110 mW, and user can select temperature output range in °C and °F. Operating for 25 hours on 9 V battery, SignalCal 2 T/C includes operator panel with LCD display, low-battery display...

Read More »
Hot and Cold Calibrator supports dual temperature tasks.
Test & Measurement

Hot and Cold Calibrator supports dual temperature tasks.

Able to calibrate 2 temperature sensors simultaneously or at 2 different temperatures, HC-DB35 offers Common Display and Dual PD Control Function for simultaneous control and calibration on both blocks. Portable device, suitable for in-field and lab use, comes in Pelican case and supports immersion depths to 100 mm (cold) or 120 mm (hot). Respectively, cold and hot ranges are -35 to +123°C...

Read More »
Loop Calibrator has rugged, handheld design.
Test & Measurement

Loop Calibrator has rugged, handheld design.

Designed to meet test and calibration needs in field and laboratory, MultiCal 15 can measure DC voltage up to 55 V, DC current up to 50 mA, and frequency up to 50 kHz with accuracy of ±0.02% reading + LSD. Simulation capabilities, respectively, cover up to 10 V, 20 mA, and 10 kHz. Also able to perform continuity tests and provide loop supply (24 V) for transmitter, handheld tool features...

Read More »

All Topics