Thomson Industries, Inc., A Regal Rexnord Brand
Radford, VA 24141
Share:
Latest Electrak HD Electric Actuator Comes with Added Voltage Capacity
Provides lifting performance up to 16 kN and has onboard electronics. Offers up to 48-volt capacity and can also integrate accessories that might need only low-level power switching. Ideal for automated guided vehicles (AGVs), forklifts, agricultural equipment, and factory automation applications.
Read More »
Latest Electrak HD Electric Actuator Comes with Added Voltage Capacity
Provides lifting performance up to 16 kN and has onboard electronics. Offers up to 48-volt capacity and can also integrate accessories that might need only low-level power switching. Ideal for automated guided vehicles (AGVs), forklifts, agricultural equipment, and factory automation applications.
Read More »
New Electrak LL Electric Actuator is CE and RoHS Compliant
Features two bearings to handle bidirectional load, as well as a built-in, brushless motor and motor drive system. Can withstand temperatures from -40° to +85°C (-40° to +185°F), and. Designed to last up to 372.83 miles and offered in IP69K and IP66 housing.
Read More »
New Electrak LL Electric Actuator is CE and RoHS Compliant
Features two bearings to handle bidirectional load, as well as a built-in, brushless motor and motor drive system. Can withstand temperatures from -40° to +85°C (-40° to +185°F), and. Designed to last up to 372.83 miles and offered in IP69K and IP66 housing.
Read More »
Latest Electrak HD Actuators are Compliant with Specification 301 of CiA Standards
Supports CANopen industrial networking protocol built on the Controller Automation Network (CAN). Uses independent standard platform that enables plug and play integration with other standard devices. CANopen enables users to finely control the motion of a linear component using programmable parameters such as distance travelled, temperature and speed.
Read More »
Latest Electrak HD Actuators are Compliant with Specification 301 of CiA Standards
Supports CANopen industrial networking protocol built on the Controller Automation Network (CAN). Uses independent standard platform that enables plug and play integration with other standard devices. CANopen enables users to finely control the motion of a linear component using programmable parameters such as distance travelled, temperature and speed.
Read More »
New Electrak MD Electromechanical Linear Actuators Achieve High Precision and Greater Flexibility
Feature automation and maintenance enablers such as feedback on position, J1939 CAN bus communication, low-current switching (PLC compatibility), and end-of-stroke indication output. Comes with onboard intelligence that enhances overall performance and eliminates space consumption by keeping any external equipment within the actuator housing. Ideal for mobile off-highway, material handling and...
Read More »
New Electrak MD Electromechanical Linear Actuators Achieve High Precision and Greater Flexibility
Feature automation and maintenance enablers such as feedback on position, J1939 CAN bus communication, low-current switching (PLC compatibility), and end-of-stroke indication output. Comes with onboard intelligence that enhances overall performance and eliminates space consumption by keeping any external equipment within the actuator housing. Ideal for mobile off-highway, material handling and...
Read More »
New Linear H-Track Actuators Feature High Force Density
Offer force rating of 4800 lbf (21 kN) and can achieve travel speeds of nearly 4 in. (100 mm) per second. Able to configure multiple pump and cylinder sizes that create H-Track iterations with various levels of speed and load capacity. Operating temperature ranging from -40˚ to 180˚F and ideal for space-constrained applications requiring high load handling and shock resistance.
Read More »
New Linear H-Track Actuators Feature High Force Density
Offer force rating of 4800 lbf (21 kN) and can achieve travel speeds of nearly 4 in. (100 mm) per second. Able to configure multiple pump and cylinder sizes that create H-Track iterations with various levels of speed and load capacity. Operating temperature ranging from -40˚ to 180˚F and ideal for space-constrained applications requiring high load handling and shock resistance.
Read More »
Latest Electrak HD Electric Actuator Comes with Added Voltage Capacity
Provides lifting performance up to 16 kN and has onboard electronics. Offers up to 48-volt capacity and can also integrate accessories that might need only low-level power switching. Ideal for automated guided vehicles (AGVs), forklifts, agricultural equipment, and factory automation applications.
Read More »
Latest Electrak HD Electric Actuator Comes with Added Voltage Capacity
Provides lifting performance up to 16 kN and has onboard electronics. Offers up to 48-volt capacity and can also integrate accessories that might need only low-level power switching. Ideal for automated guided vehicles (AGVs), forklifts, agricultural equipment, and factory automation applications.
Read More »
New Electrak LL Electric Actuator is CE and RoHS Compliant
Features two bearings to handle bidirectional load, as well as a built-in, brushless motor and motor drive system. Can withstand temperatures from -40° to +85°C (-40° to +185°F), and. Designed to last up to 372.83 miles and offered in IP69K and IP66 housing.
Read More »
New Electrak LL Electric Actuator is CE and RoHS Compliant
Features two bearings to handle bidirectional load, as well as a built-in, brushless motor and motor drive system. Can withstand temperatures from -40° to +85°C (-40° to +185°F), and. Designed to last up to 372.83 miles and offered in IP69K and IP66 housing.
Read More »Z-AXIS Expands Over-Molding Capabilities for Custom Wire and Cable Assembly Production in the USA
New equipment more than doubles over-molding throughput at the electronics contract manufacturing center near Rochester, NY February 15, 2021 - Z-AXIS, Inc. (www.zaxis.net) has added a second low-pressure injection molding machine for wire and cable assembly production at its contract design and manufacturing center near Rochester, NY. The purchase more than doubles the company’s capacity for...
Read More »Z-AXIS Expands Over-Molding Capabilities for Custom Wire and Cable Assembly Production in the USA
New equipment more than doubles over-molding throughput at the electronics contract manufacturing center near Rochester, NY February 15, 2021 - Z-AXIS, Inc. (www.zaxis.net) has added a second low-pressure injection molding machine for wire and cable assembly production at its contract design and manufacturing center near Rochester, NY. The purchase more than doubles the company’s capacity for...
Read More »Thomson Industries Introduces Online Lead Screw Selector Tool for Seamless Selection and Purchasing Experience
01.26.2021, WOOD DALE, IL- Thomson Industries, Inc., a global provider of linear motion control solutions, has launched an online selector tool for lead screws and lead nuts that simplifies and streamlines the selection and purchasing experience. The new tool enables design engineers to identify the optimal component quickly, access the corresponding 3D model with just a click, view pricing and...
Read More »Thomson Industries Introduces Online Lead Screw Selector Tool for Seamless Selection and Purchasing Experience
01.26.2021, WOOD DALE, IL- Thomson Industries, Inc., a global provider of linear motion control solutions, has launched an online selector tool for lead screws and lead nuts that simplifies and streamlines the selection and purchasing experience. The new tool enables design engineers to identify the optimal component quickly, access the corresponding 3D model with just a click, view pricing and...
Read More »New Thomson Online Selector Tool Simplifies The Purchasing Experience for Profile Linear Guides
01.12.2021, Wood Dale, IL- Thomson Industries, Inc., a leading manufacturer of linear motion control solutions, has launched an online tool that simplifies the selection and purchase of their wide range of profile rail linear guide components. Using the tool’s intuitive interface, design and system engineers can reach their optimal profile rail solution in a matter of minutes, eliminating...
Read More »New Thomson Online Selector Tool Simplifies The Purchasing Experience for Profile Linear Guides
01.12.2021, Wood Dale, IL- Thomson Industries, Inc., a leading manufacturer of linear motion control solutions, has launched an online tool that simplifies the selection and purchase of their wide range of profile rail linear guide components. Using the tool’s intuitive interface, design and system engineers can reach their optimal profile rail solution in a matter of minutes, eliminating...
Read More »