Jensen Tools, Inc.

Foam-Filled Totes will protect cargo.
Electronic Components & Devices

Foam-Filled Totes will protect cargo.

Rotationally molded Roto-Rugged Totes are filled with layers of 2 in. foam, and come with foam-cutting knife. Cases have telescoping handle that extends to 41 in. and stores flush in case. All have black powder coated tongue and groove valance that resists scratches, recessed military-style quarter-turn latches, ball-bearing wheels, full-length piano hinges, spring-loaded handles and padlock...

Read More »
Portable Tools

Long Jaw Pliers reach into difficult places.

Multi-Nut Plier is made of stainless steel with cushion PVC grips. It can tighten smaller nuts and bolts, holds hard-to-reach heads when tightening bolts, and has V-shaped jaws on sides and end. Tool is suitable for home or professional use by mechanics, repairmen, electricians, and hobbyists.

Read More »
Power Pack provides portability.
Electrical Equipment & Systems

Power Pack provides portability.

Rechargeable power pack provides 12 Vdc power. Leak-proof, maintenance-free, lead-acid battery is suitable for powering tools, lighting, computers, and radio equipment. It offers built-in circuit breaker and cigarette lighter socket. Power pack comes in zippered nylon case with shoulder strap and belt loops, and includes 115 Vac charger. Heavy-duty model is also available.

Read More »
Tool Kit terminates fiber optics.
Agricultural & Farming Products

Tool Kit terminates fiber optics.

Lightweight JTK(R)-22 kit, for ST/SC and LC connectors, uses anaerobic adhesive for permanent low loss terminations. It accommodates single-mode as well as multi-mode connectors, and includes all necessary tools and consumables. 7 lb kit includes case, crimp tool and dies, scribe jacket stripper, buffer strippers, 100x microscope, scissors, primer and adhesive, safety glasses, polishing fixture,...

Read More »
Termination Kit is designed for fiber optic connectors.

Termination Kit is designed for fiber optic connectors.

JTK®-18 Universal Fiber Termination Kit contains dual purpose Quick-Temp Oven, which accommodates hot melt connections on 1 side and Epoxy Cure connections on other side. It includes 2 crimp tool frames, 4 precision dies and all components and consumables necessary to terminate fiber optic connectors, including ST, SC, FC and LC. JTK-18 comes with debris container, electrician's scissors,...

Read More »
Network Tester pings LANs to check connectivity.
Laboratory and Research Supplies and Equipment

Network Tester pings LANs to check connectivity.

Handheld Pinger Model 60 tester can be used for installing and maintaining computer Local Area Networks running TCP/IP protocol. It uses Ping function to verify connectivity, check transmitted and received data integrity, indicate network traffic loading by measuring round trip time, and notify of duplicate IP address responses. It also provides MAC address of IP address, and warns user when...

Read More »
Tone Generator and Tracer check continuity on circuits.
Test & Measurement

Tone Generator and Tracer check continuity on circuits.

JToner provides audible tone on pair one which is inductively picked up and amplified by Jtracer. System has modular plug and separate alligator clips for pair connection. Tracer offers adjustable volume and momentary activation switch. Tip is non-conductive, eliminating shorts when running terminal blocks. Both operate on 9V batteries. Units are available separately, or as set packaged in...

Read More »
Visual Fault Locator accepts various optical connectors.
Test & Measurement

Visual Fault Locator accepts various optical connectors.

Pencil-style Model F6230A has universal connector that accepts any optical connector style with 2.5mm ferrule. Connector eliminates need for patch cable for direct connection to fiber under test if connector styles are dissimilar. VFL operates on single 1.5V AA alkaline battery and has low battery" indicator. VFL output is from 1 mW laser at 650nm, providing visibility beyond 5 km. It includes...

Read More »
Cases are for shipping electronic and industrial equipment.
Electronic Components & Devices

Cases are for shipping electronic and industrial equipment.

Guardsman® ATA 300 cases are constructed of HMW polythylene thermoplastic with continuous industrial frame. All hardware is recessed for stacking and protection during shipping. Cases are available as foam-lined with 2 in. lining on all sides, or as foam-filled with layers of dense 2 lb foam. Each case features full-length piano hinge, heavy-duty twist draw latches, and combination lock and...

Read More »
Foam-Filled Totes will protect cargo.
Electronic Components & Devices

Foam-Filled Totes will protect cargo.

Rotationally molded Roto-Rugged Totes are filled with layers of 2 in. foam, and come with foam-cutting knife. Cases have telescoping handle that extends to 41 in. and stores flush in case. All have black powder coated tongue and groove valance that resists scratches, recessed military-style quarter-turn latches, ball-bearing wheels, full-length piano hinges, spring-loaded handles and padlock...

Read More »
Portable Tools

Long Jaw Pliers reach into difficult places.

Multi-Nut Plier is made of stainless steel with cushion PVC grips. It can tighten smaller nuts and bolts, holds hard-to-reach heads when tightening bolts, and has V-shaped jaws on sides and end. Tool is suitable for home or professional use by mechanics, repairmen, electricians, and hobbyists.

Read More »
Power Pack provides portability.
Electrical Equipment & Systems

Power Pack provides portability.

Rechargeable power pack provides 12 Vdc power. Leak-proof, maintenance-free, lead-acid battery is suitable for powering tools, lighting, computers, and radio equipment. It offers built-in circuit breaker and cigarette lighter socket. Power pack comes in zippered nylon case with shoulder strap and belt loops, and includes 115 Vac charger. Heavy-duty model is also available.

Read More »
Tool Kit terminates fiber optics.
Agricultural & Farming Products

Tool Kit terminates fiber optics.

Lightweight JTK(R)-22 kit, for ST/SC and LC connectors, uses anaerobic adhesive for permanent low loss terminations. It accommodates single-mode as well as multi-mode connectors, and includes all necessary tools and consumables. 7 lb kit includes case, crimp tool and dies, scribe jacket stripper, buffer strippers, 100x microscope, scissors, primer and adhesive, safety glasses, polishing fixture,...

Read More »
Termination Kit is designed for fiber optic connectors.

Termination Kit is designed for fiber optic connectors.

JTK®-18 Universal Fiber Termination Kit contains dual purpose Quick-Temp Oven, which accommodates hot melt connections on 1 side and Epoxy Cure connections on other side. It includes 2 crimp tool frames, 4 precision dies and all components and consumables necessary to terminate fiber optic connectors, including ST, SC, FC and LC. JTK-18 comes with debris container, electrician's scissors,...

Read More »
Network Tester pings LANs to check connectivity.
Laboratory and Research Supplies and Equipment

Network Tester pings LANs to check connectivity.

Handheld Pinger Model 60 tester can be used for installing and maintaining computer Local Area Networks running TCP/IP protocol. It uses Ping function to verify connectivity, check transmitted and received data integrity, indicate network traffic loading by measuring round trip time, and notify of duplicate IP address responses. It also provides MAC address of IP address, and warns user when...

Read More »
Tone Generator and Tracer check continuity on circuits.
Test & Measurement

Tone Generator and Tracer check continuity on circuits.

JToner provides audible tone on pair one which is inductively picked up and amplified by Jtracer. System has modular plug and separate alligator clips for pair connection. Tracer offers adjustable volume and momentary activation switch. Tip is non-conductive, eliminating shorts when running terminal blocks. Both operate on 9V batteries. Units are available separately, or as set packaged in...

Read More »
Visual Fault Locator accepts various optical connectors.
Test & Measurement

Visual Fault Locator accepts various optical connectors.

Pencil-style Model F6230A has universal connector that accepts any optical connector style with 2.5mm ferrule. Connector eliminates need for patch cable for direct connection to fiber under test if connector styles are dissimilar. VFL operates on single 1.5V AA alkaline battery and has low battery" indicator. VFL output is from 1 mW laser at 650nm, providing visibility beyond 5 km. It includes...

Read More »
Cases are for shipping electronic and industrial equipment.
Electronic Components & Devices

Cases are for shipping electronic and industrial equipment.

Guardsman® ATA 300 cases are constructed of HMW polythylene thermoplastic with continuous industrial frame. All hardware is recessed for stacking and protection during shipping. Cases are available as foam-lined with 2 in. lining on all sides, or as foam-filled with layers of dense 2 lb foam. Each case features full-length piano hinge, heavy-duty twist draw latches, and combination lock and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers