Company News

ON Semiconductor

5005 E. McDowell Rd., Phoenix, AZ, 85008, USA

  • 602-244-6600

Latest New Product News from
ON Semiconductor

Electronic Components & Devices

Clock Generators suit telecom and networking applications.

Dec 19, 2007

Employing 0.25 micron CMOS technology, 3.3 V PureEdge(TM) PLL-based Models NB3N3002 and NB3N5573 create selectable Host Clock Signal Levels and sub-picosecond jitter quality clocks at 25, 100, 125, and 200 MHz. Model NB3N3002 generates 1 differential HCSL output clock, while Model NB3N5573 delivers dual output. Housed in 5.0 x 4.4 mm TSSOP-16 package, devices provide phase noise of -130 dBc/Hz at... Read More

Controls & Controllers, Electronic Components & Devices

LDO Regulators come in 2 x 2 x 0.9 mm DFN-8 package.

Dec 12, 2007

Suited for battery powered consumer and microprocessor-controlled portable applications such as cell phones, PDAs, GPS, and portable media players, Series NCP590 dual-output CMOS Low Dropout Regulators (LDO) deliver up to 300 mA per output. Voltages from 0.8-5 V are available, while output voltage is accurate to within ±0.9% with up to 5.5 V operating voltage input. Units are protected against... Read More

Electrical Equipment & Systems

Thyristor Surge Protectors suit telecommunications devices.

Dec 07, 2007

Offered in DO-214AA surface mount package and DO-15 axial leaded package, NPxxx Series includes 44 devices that protect telecommunication circuits found in modems, residential gateways, and central office access equipment. Bidirectional units range from 64-350 V and are available at surge ratings of 50, 80, and 100 A. Used as part of secondary protection circuit, devices provide overvoltage... Read More

Controls & Controllers, Electronic Components & Devices

Switching Regulator drives high brightness LEDs.

Nov 19, 2007

Supplied in 4 x 4mm DFN package, NCP3065 offers feedback voltage of 235 mV and input range of 3-40 V that allows operation from 12 Vac and 12 Vdc supplies. Internal reference voltage, trimmed to 2%, provides accurate current regulation despite variations in input voltage, LED forward voltage, and inductor tolerance. IC can be configured in controller topology with addition of external transistor... Read More

Electronic Components & Devices, Materials & Material Processing

ESD Protection Device is suited for portable applications.

Oct 24, 2007

Model ESD9L single-line ESD protection device offers 0.5 pF capacitance and clamps input ESD waveform of 15 kV per IEC61000-4-2 standard, to less than 7 V in nanoseconds. It integrates ultra-low capacitance pin diodes with high-power TVS diodes into monolithic die. Designed for high-speed data lines in portable applications such as cell phones, MP3 players, PDAs, and digital cameras, device fits... Read More

Electronic Components & Devices, Sensors Monitors & Transducers

Clock Distribution Devices offer HCSL outputs.

Aug 27, 2007

ECLinPS(TM) NB4N121K and NB4N111K feature differential Host Clock Signaling Level (HCSL) outputs and ultra low propagation delay variation for FBDIMM frequencies of 100/133/166/200/266/333/400 MHz. While NB4N121K is 1:21 or 1:42 HCSL clock distribution device, NB4N111K is 1:10 HCSL clock distribution device. Both 3.3 V devices produce additive phase jitter of 0.3 ps and are designed for... Read More

Electrical Equipment & Systems, Electronic Components & Devices

Charging/Switching Solution suits portable electronics.

Aug 14, 2007

Available in Pb-free DFN-8 package that requires 9 mm² board space, NUS3116 combines main battery switch, wall charging switch, and USB charging switch elements. Integration of main power switch, -12 V, -6.2 A, µCool(TM) single P-channel MOSFET handles main battery switch function, while 2 internal low-saturation PNP transistors handle dual-channel charging elements. With 40 mRead More

Electronic Components & Devices

Low Vce(sat) BJTs come in various package options.

Aug 14, 2007

Offered as power control solution for portable electronics, NSSxxx SMT bipolar junction transistors (BJTs) are designed for use in low-voltage switching applications. PNP and NPN devices incorporate advanced silicon technology, feature saturation voltage of 45 mV @ 1 A, and offer current gain of 300. Featuring switching speeds that minimize noise harmonics, products are self-protected against... Read More

Electronic Components & Devices, Services

Custom Manufacturing Service produces passive devices.

Aug 14, 2007

HighQ(TM) copper on silicon integrated passive device (IPD) manufacturing services are available for those with ready-for-production product and those needing custom product designs. This 8 in. wafer technology, for production of passive devices used in portable and wireless applications, offers thick copper inductors, MIM capacitors (0.62 fF/µm²), and TiN resistors (9 Read More

Computer Hardware & Peripherals, Controls & Controllers

Power Controllers are designed for notebook PCs.

Jun 26, 2007

Models NCP5371, NCP5218, and NCP5215 address notebook power subsystem needs for Vcore, DDR memory, and CPU chipsets, respectively. Available in Pb-free QFN-48 package, dual-edge, 2-phase Model NCP5371 features current mode variable frequency architecture. Combining PWM controller for VDDQ supply with VTT linear regulator, Model NCP5218 comes in Pb-free QFN-40 package. Dual channel buck controller... Read More

Controls & Controllers

Resonant Mode Controller suits switch mode power supplies.

Jun 20, 2007

Featuring built-in high side and low side MOSFET drivers and 500 kHz VCO, Model NCP1396 enables design of display power converters, AC-DC adapters, and industrial power supplies. Adjustable dead time helps fight cross-conduction between upper and lower transistor and insures zero voltage switching operation for primary switches under all load conditions. Protection features include broken... Read More

Electronic Components & Devices

Clock Generator produces under 0.3 psec of phase jitter.

May 18, 2007

Supplied in Pb-free TSSOP-8 packages, PureEdge(TM) NB3N3001 and NB3N3011 respectively create LVPECL, sub-picosecond jitter quality clocks at 106.25/212.5 MHZ and 100/106.25 MHz, which promotes timing accuracy and design flexibility for telecom and networking applications. Both PLL-based devices are 3.3 V clock generators with LVPECL differential outputs. They employ 0.25 micron CMOS technology... Read More

Controls & Controllers, Electronic Components & Devices

Multi-Phase Buck Controllers support VR10.x/VR11 computers.

May 17, 2007

Utilizing dual-edge pulse width modulation technology, Models NCP5387 and NCP5382 enable power management subsystems to efficiently respond to users' activation of high-performance computing functions. Units combine differential voltage and current sensing with adaptive voltage positioning. By enabling simultaneous switching of all phases in multiphase power waveform, controllers provide faster... Read More

Electronic Components & Devices

Power MOSFETs suit space-constrained portable electronics.

Feb 20, 2007

Supplied in 1.2 x 1.2 x 0.5 mm SOT-723 packages, NTK313xx devices feature low RDS(on) values for over 200 mA operating current and 1.5 V low gate voltage to allow direct control from power management ASIC or other controllers. Series, which utilizes Trench technology and offers integrated ESD protection, is suited for load/power switching applications and small signal interface switching. While... Read More

Electronic Components & Devices

Clock Fanout Buffers feature CMOS outputs.

Jan 24, 2007

Suited for telecom, networking, and ATE applications, 1:4 Models NB3N551, NB3L553, and NB3N2304NZ create multiple copies of clocks at full system frequencies. Model NB3N551 operates up to 180 MHz and at 3.3 or 5.0 V with max output skew of 160 ps, while Model NB3L553 operates up to 200 MHz with 35 ps typical skew and VCC of 2.5, 3.3, or 5.0 V. Operating at 140 MHz with max skew of 100 ps, Model... Read More

Electronic Components & Devices

ESD Protection Diode Arrays come in tiny SOT-953 package.

Jan 03, 2007

Measuring 1.0 x 1.0 x 0.5 mm, Series NUP45V6 offers 4 independent lines of protection from ESD and other transient voltage events. It includes devices with protection voltages of 5.6, 6.8, and 12 V. Miniature size enables diodes to be placed near I/O ports to suppress transient voltage before it can be coupled into rest of board. Delivering capacitance of less than 7 pF at 3 V and low leakage... Read More

Communication Systems & Equipment, Electronic Components & Devices

Audio Amplifiers deliver 1.3 W continuous average power.

Dec 07, 2006

Suited for cell phones and PDAs, Models NCP2892 and NCP2990 produce zero pop-and-click noise with differential and single-ended audio inputs, respectively. Audio power amplifiers offer turn-on time down to 15-30 msec and can be connected directly to battery. Using 1 µF bypass capacitor, NCP2892/990 offer 100 and 60 msec wake up times. Devices feature 10 nA current shutdown mode, 2.2-5.5 V... Read More

Controls & Controllers, Electronic Components & Devices

DC-DC Regulators suit consumer electronics applications.

Dec 07, 2006

Offering flexibility of buck, boost, or voltage inverting configuration, Models NCP3063 and NCP3163 multi-topology dc-dc regulators include internal thermal shutdown with hysteresis and cycle-by-cycle current limit. Model NCP3063 offers switching frequency of 150 kHz, which requires output capacitor of 47 µF and output inductor of 47 µH. With switching frequency of 300 kHz, Model NCP3163... Read More

Electronic Components & Devices

Bipolar Transistors are offered in multiple package options.

Nov 28, 2006

Designed for low voltage, high-speed switching applications, Low Vce (sat) bipolar junction transistors (BJTs) come in WDFN6, WDFN3, SOT-23, SOT-563, and ChipFET packages. Surface mount devices feature saturation voltage of 45 mV at 1 A and high current gain. Suited for variety of portable applications, transistors offer electrostatic discharge tolerance of more than 8,000 V and are... Read More

Controls & Controllers, Electronic Components & Devices

LDO Regulator is suited for automotive electronics modules.

Nov 20, 2006

Incorporating reverse battery, short circuit, and overload protection, NCV8664 low dropout (LDO) regulator draws 22 µA typical and 30 µA maximum quiescent current specified from -40 to 85°C. Regulator has 5 V fixed output and output current capability of 150 mA, with output voltage accurate to within ±2%. Device features internal protection against input supply reversal, output overcurrent... Read More