Empower RF Systems, Inc.

Inglewood, CA 90301

New Pulsed Transmitter Designed for Maximum Waveform Flexibility
Provided with system controller in 3U 19-inch rack unit and 16 hot swappable 2U amplifier drawers. FFR drawers allow hot or muted swapping with less than 15 minutes MTTR. Configured for L-band radar, test and EW applications.
Read More »
New Pulsed Transmitter Designed for Maximum Waveform Flexibility
Eliminates the risk of an RF section or single power supply failure taking the entire amplifier offline. Comes with a system controller in a 3U 19 rack unit and 6 hot swappable 2U amplifier drawers. Configured for L-Band radar applications.
Read More »
New Radar Module Operates from 9 to 10GHz
Features pulse widths up to 500 µsec and 20% duty cycles. Utilizes 48V GaN on SiC devices. Fast enable/disable time at less than 250ns.
Read More »
New RF Amplifier with Built in Peak Detectors
RF Model 2198 covers 20 to 6000 MHz in a three band compact configuration. Features automatic gain control, pulse modulation and manual gain control. Ideal for general purpose lab and production line test applications.
Read More »
C Band Transmitter for Radar and Jamming
Empower RF Systems Model 2217 is a Long Duty Cycle Pulsed GaN On SiC Amplifier Delivering 8KW of Peak Power. This air cooled 8 KW 20% duty cycle pulse amplifier system brings sophisticated monitoring, protection, and control functions to mission critical applications. It's an intelligent amplifier system with a flexible software and embedded firmware design that can be customized to add mission...
Read More »
Rugged L Band SSPA for Satcom Uplink
Empower RF Systems Releases Model 2224, a Tactical Up-Armored Solid State GaN On SiC Amplifier Producing 150 Watts Empowers Tactical up-armored model 2224 is a compact SSPA operating from 1 to 2 GHz, delivering 150 Watts CW output. The amplifier includes a fast Tx/Rx switch and is designed for rugged outdoor and tactical deployment of data com links. The all-weather heavy duty NEMA 4 enclosure...
Read More »
New Pulsed Driver Amplifier Produces Minimum of 1 KW Peak Power
Model 2239 includes factory customizable I/O for interfacing/signaling external sensors and control. Pulse capabilities include up to 20% duty cycles and pulse widths as long as 500 μsec with up to 25 KHz PRF’s. Self-monitoring protection is included and will self-protect with sudden open/short conditions and is tolerant to VSWR up to 3:1.
Read More »
New Liquid Cooled SSPA Comes with 2U Amplifier Drawer and Full System Rack
Features solid state design. Offers digital peak and RMS detection. Consists of system controller in 3U and up to 16 hot swappable 2U amplifier drawers.
Read More »
New Model 2225 Amplifier Provides Asymmetrical and Random Pulse Width and Duty Cycle Operation
Features liquid cooled and scalable architecture that operates from 5.2 to 5.9GHz. Offers system controller in 3U and up to 16 hot swappable 2U amplifier drawers with each amplifier drawer containing an integrated power supply in its 2U chassis. Eliminates the risk of an RF section or single power supply failure taking the entire amplifier offline.
Read More »
New Solid State CW Amplifier with High Efficiency and Waveform Flexibility
Model 2176 produces minimum 4K Watt CW and 2KW RMS at 3.6 PAR from 1750 to 2120 MHz. Available with internal directional coupler, external forward and reverse sample ports and an simple to use web GUI. Includes output modes include MGC, AGC and ALC which provide flexibility when integrating into legacy uplink systems.
Read More »
New Pulsed Transmitter Designed for Maximum Waveform Flexibility
Provided with system controller in 3U 19-inch rack unit and 16 hot swappable 2U amplifier drawers. FFR drawers allow hot or muted swapping with less than 15 minutes MTTR. Configured for L-band radar, test and EW applications.
Read More »
New Pulsed Transmitter Designed for Maximum Waveform Flexibility
Eliminates the risk of an RF section or single power supply failure taking the entire amplifier offline. Comes with a system controller in a 3U 19 rack unit and 6 hot swappable 2U amplifier drawers. Configured for L-Band radar applications.
Read More »
New Radar Module Operates from 9 to 10GHz
Features pulse widths up to 500 µsec and 20% duty cycles. Utilizes 48V GaN on SiC devices. Fast enable/disable time at less than 250ns.
Read More »Power Amplifier System with an Internal Optical Communication Link
Inglewood, CA – 02/15/2022 – Empower RF Systems, Inc has added to its growing IP portfolio with the announcement today of a United States Patent and Trademark Office (USPTO) awarded patent entitled “Power Amplifier System with an Internal Optical Communication Link”. As described in the Abstract, the patent is awarded for “techniques for implementing an internal optical communication...
Read More »
New RF Amplifier with Built in Peak Detectors
RF Model 2198 covers 20 to 6000 MHz in a three band compact configuration. Features automatic gain control, pulse modulation and manual gain control. Ideal for general purpose lab and production line test applications.
Read More »
C Band Transmitter for Radar and Jamming
Empower RF Systems Model 2217 is a Long Duty Cycle Pulsed GaN On SiC Amplifier Delivering 8KW of Peak Power. This air cooled 8 KW 20% duty cycle pulse amplifier system brings sophisticated monitoring, protection, and control functions to mission critical applications. It's an intelligent amplifier system with a flexible software and embedded firmware design that can be customized to add mission...
Read More »
Rugged L Band SSPA for Satcom Uplink
Empower RF Systems Releases Model 2224, a Tactical Up-Armored Solid State GaN On SiC Amplifier Producing 150 Watts Empowers Tactical up-armored model 2224 is a compact SSPA operating from 1 to 2 GHz, delivering 150 Watts CW output. The amplifier includes a fast Tx/Rx switch and is designed for rugged outdoor and tactical deployment of data com links. The all-weather heavy duty NEMA 4 enclosure...
Read More »
New Pulsed Driver Amplifier Produces Minimum of 1 KW Peak Power
Model 2239 includes factory customizable I/O for interfacing/signaling external sensors and control. Pulse capabilities include up to 20% duty cycles and pulse widths as long as 500 μsec with up to 25 KHz PRF’s. Self-monitoring protection is included and will self-protect with sudden open/short conditions and is tolerant to VSWR up to 3:1.
Read More »
New Liquid Cooled SSPA Comes with 2U Amplifier Drawer and Full System Rack
Features solid state design. Offers digital peak and RMS detection. Consists of system controller in 3U and up to 16 hot swappable 2U amplifier drawers.
Read More »
New Model 2225 Amplifier Provides Asymmetrical and Random Pulse Width and Duty Cycle Operation
Features liquid cooled and scalable architecture that operates from 5.2 to 5.9GHz. Offers system controller in 3U and up to 16 hot swappable 2U amplifier drawers with each amplifier drawer containing an integrated power supply in its 2U chassis. Eliminates the risk of an RF section or single power supply failure taking the entire amplifier offline.
Read More »