Dow Corning Corporation
Midland, MI 48686
Silver-Filled Silicone Adhesive suits FC-BGA devices.
Addressing issue of overheating in advanced flip-chip, ball grid array (FC-BGA) devices, DOW CORNINGÃ-® DA-6534 Thermal Adhesive bonds chip into its package and transfers heat away from chip toward integrated heat sink. Thixotropic material is completely inert, will not produce any byproducts, and exhibits thermal resistance of 0.09 cmÃ-² C/W at 24 microns. Bondline thickness for this...
Read More »Coatings protect exposed construction materials.
Stable for up to 1 year, Dow CorningÃ-® 1-6184 Water Soluble Siloxane cures to form water-insoluble, water-repellent treatment within 24 hr of application. It is optimized for aged masonry applications. Dow CorningÃ-® SHP 50 is free flowing-powder designed to impart hydrophobicity to cementitious dry-mix powder applications. Powder forms barrier to capillary movement of liquid water in...
Read More »Adhesive/Sealant cures rapidly at room temperature.
Consisting of 2-compound, non-slump silicone product, Q3-3526 Base and Catalyst Adhesive/Sealant cures via non-corrosive, low-odor condensation cure mechanism. It yields unprimed adhesion to glass and many plastic and metal substrates, including polyamide, PC, PBT, PET, ABS and acrylics, and plastics treated with scratch-resistant coating. Applications include assembly of automotive headlights...
Read More »Liquid Silicone Rubber suits high-speed manufacturers.
Designed to require minimal cycle times to accommodate high-speed manufacturers, SilasticÃ-® LC-70-2004 liquid silicone rubber (LSR) has 70 shore hardness and is formulated for optimal mechanical properties and clarity. Material meets FDA21 CFR 177.2600 and BfR, XV food contact standards and is suited for precision-production of complex parts. Applied through automated injection, material...
Read More »Bilayer Photoresist handles sub-65nm lithography.
Bilayer photoresist uses silicon polymer in imaging layer to optimize etch selectivity for addressing demands of sub-65nm lithography. Level of silicon content also eliminates need for separate hardmask layer and accompanying process steps. Photoresist exhibits no detectable levels of outgassing during lithography process, and etch selectivity lends to successful transfer of smaller circuit...
Read More »Insulator Coating minimizes required electrical maintenance.
Applied once, SylgardÃ-® HVIC+ provides long-term water repellency/hydrophobicity to protect against power distribution interruptions due to increased leakage current, dryband arcing, and flashover from salt spray, industrial pollutants, and desert sand. One-part silicone high voltage insulator coating (HVIC), unaffected by salt air, rain, and humidity, exhibits tracking resistance and...
Read More »Water Repellent Emulsion suits construction materials.
Featuring low VOCs, IE-6694 is used to formulate water-based, water-repellent primers, paints, and coatings for porous construction materials such as concrete, stone, brick, and grout. Product is 60% active and can be diluted with water for post-treatment application or incorporated into building materials as admixture. By removing silicon hydride from formulation, product eliminates need for...
Read More »Dow Corning Adds Blends, Masterbatches to Silane Solutions Lineup
Simplifies Compounding for Crosslinked Polyethylene MIDLAND, Mich.- August 24, 2006- Dow Corning has introduced a family of pre-blended silanes for crosslinking polyethylene that simplifies compounding when making crosslinked PE pipe (PEX) in a one- or two-step process or making crosslinked PE wire and cable insulation (XLPE) in a one-step process. Dow CorningÃ-® Z-6358 Silane, Dow...
Read More »Dow Corning Solar Solutions Introduces Breakthrough Solar Material
A commercially viable solar-grade silicon derived from metallurgical silicon purification will increase the availability of feedstock to the photovoltaic industry, providing new options to ingot, wafer and cell producers MIDLAND, Mich., Sept. 4 -- Dow Corning Corp. today announced that it has achieved a milestone in solar energy technology: a solar-grade (SoG) silicon derived from metallurgical...
Read More »Surface Engineering Platform uniformly coats substrates.
Using liquid precursor which is atomized and sprayed into plasma jet, PlasmaStream(TM) coats surfaces to provide characteristics such as adhesion, waterproofing, low-friction slickness, or anti-microbial properties. Suitable for manufacturers of 3D, rigid, or molded parts, platform eliminates need for drying and curing; works at room temperature; requires no solvents, surfactants, or water; and...
Read More »