Kalamazoo Industries, Inc.
Kalamazoo, MI 49048
High Speed Mitre Saw cuts non-ferrous materials.
Measuring 25 x 24 x 17 in., Model KM10HS 10 in. mitre saw is designed for cutting aluminum, brass, plastic, and other soft, non-ferrous materials. It mitres 45-
Read More »
Kalamazoo Industries Introduces the Model K30PH 30-Inch Abrasive Saw
Kalamazoo Industries has introduced the new Model K30PH 30-inch abrasive saw. The saw features air/oil power down feed, a massive 25 HP, 3 phase 220/440V motor with magnetic starter and a 1-3/4-inch arbor with sealed ball bearings. The saw measures 36 L x 24 W x 84 H and has a capacity of up to 5-inch solids and 8-inch shapes. Options include a totally enclosed hydraulic down feed, stock...
Read More »
Kalamazoo Industries Introduces the Model K10WBT Enclosed Wet Benchtop Saw
The new Kalamazoo Industries Model K10WBT enclosed wet cutting benchtop abrasive saw offers economical manual operation, with a capacity of up to 1-1/2-inch solids and 2-1/5-inch pipe. The saw features a magnetic switch, an internal work light, dual 3-inch vises, dual coolant nozzles with coolant and pump, T-Slot Table, a 2HP 3 phase, 220/440 volt TEFC motor running at 3450 RPM at the spindle,...
Read More »Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw Eliminates Abrasive Particle Dispersion
Kalamazoo Industries Model K12-14MS Manual Metallurgical Saw features an enclosed wet cutting area with dual coolant nozzles to effectively eliminate the dispersion of abrasive particles into the workplace. The saw has a 14-inch abrasive wheel, a 5 HP, 3 phase , 1725 RPM TEFC motor, dual moveable 4 screw vises and a 24V halogen light inside the enclosure. Designed for external manual operation,...
Read More »
Manual Cold Saw features solid hinge-type design.
Model C315/350 manual cold saw incorporates double vise assembly, with 6-¼ in. maximum opening, that provides holding power on both sides of cut for burr-free operation. Saw includes 14 in. HSS blade; 3.5 hp, 3-phase TEFC motor; 2-speed spindle; totally enclosed transmission; 24 V controls; and built-in flood coolant. It can cut round shapes with up to 4/3-¾ in. dia at 90-
Read More »
Kalamazoo Industries Model K12-14V Abrasive Saw for Heavy Duty Use
The Kalamazoo Industries Model K12-14V abrasive cut-off saw is designed for large, heavy-duty sawing applications. Using either a 12 or 14 abrasive wheel, the saw can accept up to 2-1/2 solid stock and up to 3 shapes. The saw features a DCV-6 dust collector/vacuum and hood rated at 400 CFM, a washable filter element and sealed ball bearings. Other features include a dual V-belt drive, heavy-duty...
Read More »
Kalamazoo Industries Model KM14SC Mitre Saw Designed for Precise Dry Cutting
The Kalamazoo Industries Model KM14SC mitre saw uses a 14-inch carbide tipped blade to produce clean cuts without burrs or heat generation. This enables precise dry cutting of thin wall mild steel and aluminum, as well as 1/4-inch angle, pipe and structural steel. The KM14SC saw features heavy cast iron construction, a 1300 rpm spindle speed, 1-inch arbor, sealed ball bearings, dual V-belt drive,...
Read More »
Kalamazoo Industries Model S612V Combination Sander Offers Economical Alternative
The Kalamazoo Industries Model S612V Combination Sander with a vacuum base dust collector offers an economical alternative to purchasing individual sanders. Combining a belt sander and disc sander in one machine also improves productivity on jobs requiring frequent use of both types of machines. The belt sander portion features a quick-change belt that utilizes a single pre-tensioned lever for...
Read More »Kalamazoo Industries Model KM26D Abrasive Mitering Saw
Designed for Heavy-Duty Applications The Kalamazoo Industries Model KM26D Abrasive Mitering Saw is designed for heavy-duty applications. The saw features a 26-inch blade, with a capacity up to 9-inches at 90-º, and up to 4 inches for solids and 6 inches for shapes at 45-º (right mitre only). Standard features include an air operated chain vise, heavy steel safety guard with a 9 x 16 wheel guard...
Read More »Kalamazoo Industries Products Receive CE Certification for Sale In Europe
Kalamazoo Industries announced it has received CE certification on its line of wet saws and can manufacture sanders to that European standard for sale into the countries of the European Union (EU) and the European Economic Area (EEA). Kalamazoo Industries models covered include K10SW abrasive saw, K12-14CS masonry saw, K12-14MS metallurgical saw, the K12-14W abrasive cut-off saw and the KM20-22...
Read More »