Blackmer, Inc.
Grand Rapids, MI 49509
New System One Centrifugal Pumps Exceed The 400F (204C) Standard Temperature Limit
Support safe and reliable transfer of critical and valuable fluids in high-temperature applications. Meets temperature requirements of up to 450°F (232°C) with the 450°F Line, 650°F (343°C) with the 650°F Line and even 750°F (398°C). Offer capacities up to 1,400 gpm (5,299 L/min) and incorporate high temperature bushings, fasteners and paint.
Read More »
SX1B-DEF Series Sliding Vane Pump features 316 stainless-steel motor shaft.
SX1B-DEF Series Sliding Vane Pump offers flow-rate ranging from 10 gpm to 250 gpm. Unit is suitable for fleet-refueling or totes applications and is equipped with replaceable Duravanes and mechanical seal. Product comes with C-face pump mounting and 1 in. NPT and BSPP tapped-port options. SX1B-DEF Series is available with 12-volt and 110-volt motor variants. 110-volt version is offered with a 50-...
Read More »
GNX and GNXH Series Pumps feature self-adjusting vanes.
Available in 2- and 2.5-in. flanged port sizes with flow capacities ranging from 20 to 500 gpm up to 175 psi working pressures, GNX and GNXH Series Sliding Vane Pumps are used in fuel oil, lube oil, jet fuel, gasoline and edible oil applications. Units are self-priming and comes with commercial-grade gear reducer for more operating speeds.
Read More »
Screw Pumps maintain performance in adverse conditions.
Available with or without external timing gears and bearings, S Series self-priming, double-ended, positive displacement pumps come in twin and triple screw designs that provide complete axial balancing of rotating screws. Timing technologies eliminate metal-to-metal contact with pump. ATEX-certified for use in explosive or dangerous environments, pumps address challenges found in oilÂ- and...
Read More »
Sliding Vane Pumps offer 90° and 180° porting options.
Available in 2, 2.5, 3, and 4 in. sizes, NPH and XH Series feature internal relief valve that protects against excessive pressures, symmetrical bearing support that promotes extended life, as well as self-priming and dry-run capabilities. Suction-lift capability suits pumping from underground tanks, bulk-plant service, and aircraft refueling. While XH pumps handle non-corrosive and non-abrasive...
Read More »
Oil-Free Reciprocating Gas Compressors feature triple seal.
Featuring double-distance piece design with 3 sets of packing, Models HD943 and HDL943 maintain product purity and prevent oil migration for applications that require maximum leakage control. External ports are located at top and bottom of distance piece chambers for purging, pressurizing, or venting. Other features include ductile-iron valves with PEEK valve plates, ductile-iron head and...
Read More »
Screw Pumps safely and efficiently transfer critical fluids.
ATEX-certified for use in explosive or dangerous environments, S Series includes self-priming, double-ended, positive displacement pumps. Twin Screw Pumps (WTG) areÂ- double-suction, self-priming, twin-screw pumps with external bearings and timing gear transmissions; Twin Screw Pumps with non-timing (NTG) gear transmission feature single-suction design; and self-priming Triple Screw Pumps...
Read More »
Reciprocating Gas Compressors enhance oilfield production/storage.
Available in 8 models with heavy-duty, 1- and 2-stage configurations, NG Series incorporates double seal with single distance piece located betweenÂ- 2 sets of seals on each piston rod. Materials maximize performance while minimizing maintenance. Also offering 8 models in 1- or 2-stage configurations with double seal, NGS Series handles sour gas that contains up to 8% dry H2S. Select parts...
Read More »
Blackmer® Sliding Vane Pumps Feature the Operational Advantages Required for Shale Oil Transfer Applications
Grand Rapids, MI – Blackmer®, a global leader in positive displacement and centrifugal pump, and reciprocating compressor technologies, is pleased to announce that its XL, TX and SGL Series Sliding Vane Pumps provide numerous design and energy efficiency advantages that are ideal for operators in the shale oil industry. Oil produced from tight shale formations is much lighter than...
Read More »
Sliding Vane Pump handles abrasive liquids. .
With hardened rotor and shaft, liner, end discs, and vanes, 4 in. Model XLW4A is suitable for use with liquids featuring suspended abrasive particles up to 250 microns at concentration up to 25%. Pump produces flow rates up to 190 gpm at speeds up to 350 rpm, and handles viscosities to 20,000 SSU. Operating at temperatures up to 300°F with working pressures to 350 psi, pump is suited for...
Read More »
New System One Centrifugal Pumps Exceed The 400F (204C) Standard Temperature Limit
Support safe and reliable transfer of critical and valuable fluids in high-temperature applications. Meets temperature requirements of up to 450°F (232°C) with the 450°F Line, 650°F (343°C) with the 650°F Line and even 750°F (398°C). Offer capacities up to 1,400 gpm (5,299 L/min) and incorporate high temperature bushings, fasteners and paint.
Read More »
SX1B-DEF Series Sliding Vane Pump features 316 stainless-steel motor shaft.
SX1B-DEF Series Sliding Vane Pump offers flow-rate ranging from 10 gpm to 250 gpm. Unit is suitable for fleet-refueling or totes applications and is equipped with replaceable Duravanes and mechanical seal. Product comes with C-face pump mounting and 1 in. NPT and BSPP tapped-port options. SX1B-DEF Series is available with 12-volt and 110-volt motor variants. 110-volt version is offered with a 50-...
Read More »
GNX and GNXH Series Pumps feature self-adjusting vanes.
Available in 2- and 2.5-in. flanged port sizes with flow capacities ranging from 20 to 500 gpm up to 175 psi working pressures, GNX and GNXH Series Sliding Vane Pumps are used in fuel oil, lube oil, jet fuel, gasoline and edible oil applications. Units are self-priming and comes with commercial-grade gear reducer for more operating speeds.
Read More »
Screw Pumps maintain performance in adverse conditions.
Available with or without external timing gears and bearings, S Series self-priming, double-ended, positive displacement pumps come in twin and triple screw designs that provide complete axial balancing of rotating screws. Timing technologies eliminate metal-to-metal contact with pump. ATEX-certified for use in explosive or dangerous environments, pumps address challenges found in oilÂ- and...
Read More »
Sliding Vane Pumps offer 90° and 180° porting options.
Available in 2, 2.5, 3, and 4 in. sizes, NPH and XH Series feature internal relief valve that protects against excessive pressures, symmetrical bearing support that promotes extended life, as well as self-priming and dry-run capabilities. Suction-lift capability suits pumping from underground tanks, bulk-plant service, and aircraft refueling. While XH pumps handle non-corrosive and non-abrasive...
Read More »
Oil-Free Reciprocating Gas Compressors feature triple seal.
Featuring double-distance piece design with 3 sets of packing, Models HD943 and HDL943 maintain product purity and prevent oil migration for applications that require maximum leakage control. External ports are located at top and bottom of distance piece chambers for purging, pressurizing, or venting. Other features include ductile-iron valves with PEEK valve plates, ductile-iron head and...
Read More »
Screw Pumps safely and efficiently transfer critical fluids.
ATEX-certified for use in explosive or dangerous environments, S Series includes self-priming, double-ended, positive displacement pumps. Twin Screw Pumps (WTG) areÂ- double-suction, self-priming, twin-screw pumps with external bearings and timing gear transmissions; Twin Screw Pumps with non-timing (NTG) gear transmission feature single-suction design; and self-priming Triple Screw Pumps...
Read More »
Reciprocating Gas Compressors enhance oilfield production/storage.
Available in 8 models with heavy-duty, 1- and 2-stage configurations, NG Series incorporates double seal with single distance piece located betweenÂ- 2 sets of seals on each piston rod. Materials maximize performance while minimizing maintenance. Also offering 8 models in 1- or 2-stage configurations with double seal, NGS Series handles sour gas that contains up to 8% dry H2S. Select parts...
Read More »
Blackmer® Sliding Vane Pumps Feature the Operational Advantages Required for Shale Oil Transfer Applications
Grand Rapids, MI – Blackmer®, a global leader in positive displacement and centrifugal pump, and reciprocating compressor technologies, is pleased to announce that its XL, TX and SGL Series Sliding Vane Pumps provide numerous design and energy efficiency advantages that are ideal for operators in the shale oil industry. Oil produced from tight shale formations is much lighter than...
Read More »
Sliding Vane Pump handles abrasive liquids. .
With hardened rotor and shaft, liner, end discs, and vanes, 4 in. Model XLW4A is suitable for use with liquids featuring suspended abrasive particles up to 250 microns at concentration up to 25%. Pump produces flow rates up to 190 gpm at speeds up to 350 rpm, and handles viscosities to 20,000 SSU. Operating at temperatures up to 300°F with working pressures to 350 psi, pump is suited for...
Read More »