Acromag, Inc.

Controls & Controllers

Ethernet Modules interface 16 discrete I/O.

Providing eight 32-bit pulse counters with timers, alarms, and non-volatile memory, BusWorks® 989EN Modules deliver isolated Ethernet Modbus TCI/IP interface for any I/O mix of up to 16 discrete signals. Commercial and industrial-grade inch-wide units have 16 individually configurable bi-directional I/O channels with 0-28 Vdc signal range. When configured as inputs, channels accept 2- or 3-wire...

Read More »
Ethernet I/O Devices process 32 inputs and 16 outputs.
Controls & Controllers

Ethernet I/O Devices process 32 inputs and 16 outputs.

Suitable in Class I, Division 2, Group A, B, C, and D locations, EtherStax(TM) Series high-density Ethernet I/O blocks offer channel-isolated discrete I/O for I/O and SCADA applications. Models ES2116, ES2117, and ES2118 have 97-132 Vac, 20-60 Vdc, and 105-135 Vdc input ranges, respectively. Features include 10/100Base-TX copper and 100Base-FX connections, Modbus TCP/UDP/IP interface to host...

Read More »
Configurable PMC I/O Modules feature conduction cooling.
Communication Systems & Equipment

Configurable PMC I/O Modules feature conduction cooling.

Enabling users to configure custom I/O boards using application-specific instruction sets, PMC-CX series features Xilinx® Virtex-II FPGAs with 11k or 24k logic cells and choice of 32 differential RS422/485 lines or 24 RS422/485 lines with 16 CMOS I/O channels. All models have PCI interface with 32-bit 66 MHz bus mastering and support dual DMA channel data transfer to CPU. Allotted memory gives...

Read More »
Digital I/O Modules implement user-configurable FPGA.
Controls & Controllers

Digital I/O Modules implement user-configurable FPGA.

Industry Pack IP-EP200 Series I/O Modules interface digital I/O signals to user-configurable Altera® Cyclone(TM) II FPGA. Several models are available to accommodate RS-485 differential, TTL, or LVDS digital I/O signals. All modules feature Cyclone II EP2C20 FPGA device with 20K logic elements, 240 Kb RAM, and 26 embedded multipliers. Series IP-EP200 allows users to develop and store their own...

Read More »
I/O Modules combine configurable FPGA with DIO front-ends.
Controls & Controllers

I/O Modules combine configurable FPGA with DIO front-ends.

Models PMC-LX and PMC-SX support AXM plug-in I/O extension modules to interface different signal types to user-configurable Xilinx® Virtex-4® FPGA, which can process user-defined algorithms and custom logic routines on RS-485 differential, CMOS, or LVDS digital I/O (DIO) signals. While PMC-LX is optimized for high-performance logic with choice of LX40 or LX60 Virtex-4 FPGAs, PMC-SX uses SX35...

Read More »
Stackable Ethernet I/O Block processes 96 I/O signals.
Controls & Controllers

Stackable Ethernet I/O Block processes 96 I/O signals.

Suited for distributed I/O and SCADA applications, EtherStax(TM) ES2113 offers Modbus TCP/UDP/IP communication to host controller and i2o® technology for peer-to-peer communication between I/O units. Dual network ports support 10/100Base-TX copper and 100Base-FX fiber-optic connections and provide redundant communication path for critical applications. Embedded web page provides configuration...

Read More »
Electrical Equipment & Systems

Ethernet Switches feature redundant ring technology.

Web-managed Model EIS-408 provides six 10/100Base-TX copper ports and two 100Base-FX fiber ports, while unmanaged Model EIS-308 provides eight 10/100 copper ports and is also available without redundancy. All models include auto MDI/MDI-X crossover and auto-polarity, IEEE 802.3 and 802.3u compliance, IEEE 802.3x flow control on full-duplex, and back pressure on half-duplex. They feature IP30...

Read More »
Controls & Controllers

Ethernet I/O Modules combine 3 functions in one model.

Combo 951EN and 952EN Ethernet I/O Modules feature 4 analog input channels, 2 analog output channels, and 6 discrete I/O channels on single 1 in. wide unit. They support Ethernet/IP and Modbus TCP/IP protocols as well as i2o(TM) communication technology. Since Combo modules have inputs and outputs, they can function as transmitters and receivers to independently interface signals. Three-way 1,500...

Read More »
Ethernet I/O Modules speak directly to each another.
Controls & Controllers

Ethernet I/O Modules speak directly to each another.

Featuring i2o(TM) technology, BusWorks® 900EN input modules can send measured signal data directly to output modules without PLC, PC, or other controller in between. Analog input modules measure current, voltage, or temperature signals and transmit data to analog output modules that provide proportional 4-20 mA or 0-10 V DC output. Discrete I/O modules control local devices based on level status...

Read More »
I/O Modules feature reconfigurable FPGA.
Controls & Controllers

I/O Modules feature reconfigurable FPGA.

Series PMC-AX performs A/D and D/A functions under control of user-programmable FPGA. Application-specific logic routines and algorithms can be downloaded into on-board Xilinx® Virtex-II® FPGA with up to 32,000 logic cells for control operation of I/O channels. Inputs are sampled at up to 65 MSps and processed by FPGA without CPU intervention. Models are available with 1 M, 2 M, or 3 M-gate...

Read More »

All Topics