Acromag, Inc.

VPX Boards pair configurable Virtex-5 FPGA with PCIe interface.
Computer Hardware & Peripherals

VPX Boards pair configurable Virtex-5 FPGA with PCIe interface.

Designed for algorithm processing or execution of complex logic routines in embedded computer systems, 3U Series VPX-VLX can be ordered with Xilinx VLX85T, VLX110T, or VLX155T FPGA featuring up to 155,000 logic cells and 128 DSP48E slices. Dual-ported 1M x 64-bit SRAM enables high-speed DMA transfers to/from CPU while simultaneously writing data to memory. Field I/O interfaces to FPGA via rear P2...

Read More »
Thermocouple Transmitters allow PC-based configuration via USB.
Electrical Equipment & Systems

Thermocouple Transmitters allow PC-based configuration via USB.

Model ST132 thermocouple/millivolt signal conditioner converts sensor input signals from 8 thermocouple types or ±100 mV range and output proportional 4-20 mA process control signal. Device is output loop-powered, 7-32 Vdc 2-wire transmitter that mounts in DIN Form B sensor heads or on DIN rail. Offering response time as low as 8 msec, it performs signal linearization and cold-junction...

Read More »
VPX Carrier Cards (3U) route signals to PMC/XMC modules.
Display & Presentation Equipment

VPX Carrier Cards (3U) route signals to PMC/XMC modules.

Featuring 8-lane PCIe bus Gen 2 interface, VPX4810 board routes power and interface bus signals to plug-in XMC or PMC mezzanine module through VPX computer system's card slot connector. Product supports standard IEEE-1386.1 modules and conforms to VPX VITA 46.0, 46.4, and 46.9. VITA 48 option is also available for Ruggedized Enhanced Design Implementation. Also compatible with VITA 65 OpenVPX...

Read More »
XMC Module with Spartan-6 FPGA targets embedded computing tasks.
Controls & Controllers

XMC Module with Spartan-6 FPGA targets embedded computing tasks.

XMC-SLX mezzanine modules provide computing power for custom signal processing and algorithm acceleration with Xilinx® Spartan®-6 FPGA's integrated DSP, logic, and memory resources. Field I/O interfaces are available via rear J4/P4 connector and/or optional front mezzanine I/O extension modules. All models employ FPGA that provides 147,433 logic cells and 180 DSP slices. Memory banks - 256k x...

Read More »
RTD Signal Conditioners have USB interface for PC-based setup.
Electrical Equipment & Systems

RTD Signal Conditioners have USB interface for PC-based setup.

Model ST131 ASIC-driven RTD transmitters include digital USB setup and calibration interface and are designed for operation in harsh environments, in temperatures from -40 to +80°C. Providing electrical noise immunity and surge protection, DIN Form B head-mount instruments also have non-polarized and reverse polarity protected output. Windows configuration software is include and units perform...

Read More »
I/O Modules offer single/dual MIL-STD-1553 interface.
Controls & Controllers

I/O Modules offer single/dual MIL-STD-1553 interface.

Designed to interface avionics weapons subsystems to embedded control system, IP570 Industry Pack ANSI/VITA-4 card plugs into VME, CompactPCI, and PCI bus mezzanine carrier cards for SBCs, while IOS-570 model is intended for use within I/O Server industrial fanless box computer. Both offer 1 or 2 interface channels operating at data rates up to 1 Mbps and feature DDC Micro-ACE bus terminal that...

Read More »
Electrical Equipment & Systems

USB Isolator shields host PC and connected devices from surges.

Inserted in-line with USB connection, industrial-rated USB-Isolator provides 1,500 Vac/2,100 Vdc isolation for USB 2.0 or 1.1 connections from computers to USB devices. Unit protects against over-voltage conditions caused by electrical surges and transient voltage spikes up to 8 kV. LED indicates that power is being received and will blink if connected device tries to draw more than 120 mA....

Read More »
Controls & Controllers

XMC Module combines FPGA with high-speed PCIe interface. .

Combining configurable Xilinx Virtex-5 FPGA with high-speed memory buffers and PCIe bus 4-lane interface, Model XMC-VLX is capable of executing custom instruction sets and algorithms. Field I/O interfaces to FPGA via rear J4/P4 connector and/or with optional front mezzanine plug-in I/O modules. Up to 64 I/O lines are accessible through J4 connector. Available in 3 versions, module offers choice...

Read More »
PMC Carrier Card supports stand-alone FPGA modules.
Computer Hardware & Peripherals

PMC Carrier Card supports stand-alone FPGA modules.

Allowing use of PMC module in stand-alone mode, APMC4110 delivers power to PMC module and regulates PCI bus start-up sequence to prevent system lock-up by connection to local bus. Single-slot, non-intelligent carrier board routes signals to and from PMC module, and user has access to field I/O via two 50-pin ribbon cable connectors. Using external power supply, carrier card allows use of any...

Read More »
CAN Bus I/O Modules provide 2 interface channels.
Controls & Controllers

CAN Bus I/O Modules provide 2 interface channels.

Offered in 2 versions, isolated CAN bus modules interface network sensors and actuators to high-performance control systems. IP560 is Industry Pack ANSI/VITA-4 card that plugs into VME, CompactPCI, and PCI bus mezzanine carrier cards or SBCs in embedded systems, while IOS-560 models are designed for use within Acromag's I/O Server industrial PC. Both feature 2 channels with optional 1,000 V...

Read More »

All Topics