Acromag, Inc.

Rugged Type 6 Basic COM Express Module features removable memory.
Computer Hardware & Peripherals

Rugged Type 6 Basic COM Express Module features removable memory.

Offered in various of model configurations with heat spreader plate, XCOM-6400 is available with choice of Intel® fourth generation Core™ i7 (quad core, 2.4 GHz, 47 W) or i5 (dual core, 1.6 GHz, 25 W) Haswell CPU and Intel 8-Series QM87 PCH chipset. SODIMM hold-down method ensures secure connections while allowing users to remove or upgrade memory. Ruggedization features include extra-thick...

Read More »
Communication Systems & Equipment

PCIe Bus Adapter allows PC to communicate with PMC module.

With APCe8670 Carrier Card, users can interface PMZ mezzanine module to PC across PCI Express bus. Bridge chip handles PCI-X to PCIe conversion between plug-in PMC module and host computer. Carrier's PCIe x4 interface supports up to 4 serial lanes for rapid data transfer. Three PMC PCI-X bus sockets interface through bridge to carrier's PCIe x4 edge connector, while other PMC socket routes 32...

Read More »
Frequency Transmitter uses software and USB for configuration.
Cleaning Products & Equipment

Frequency Transmitter uses software and USB for configuration.

Operating from 12–32 Vdc, Model TT339 converts pulsed, sinusoidal, and other periodic waveform input signals to proportional 0–20 mA, 0–10 V, or ±10 Vdc output. Unit accepts unipolar and bipolar input signals with amplitudes up to 120 Vrms and frequencies up to 100 KHz. Suitable for hostile environments, 4-wire transmitter operates from -40 to 176°F. High-voltage isolation of 1,500 Vac...

Read More »
Interface Modules monitor/control high-voltage field devices.
Controls & Controllers

Interface Modules monitor/control high-voltage field devices.

Measuring 22.5 mm wide, DIN rail-mount BusWorks®XT Series connects discrete field devices to measurement and control system I/O modules. XTA-120V-6 optocoupler modules have 6 individually isolated 120 Vac/Vdc digital inputs to sense on/off levels and provide 5–32 Vdc logic outputs to fieldbus input module or controller. XTA-MRNO-6 interposing relay module receives 4–32 Vdc logic-level...

Read More »
Carrier Card interfaces XMC mezzanine modules to PCIe bus.
Display & Presentation Equipment

Carrier Card interfaces XMC mezzanine modules to PCIe bus.

Accommodating data transfer requirements of high-performance industrial and scientific research computing systems, APCe8675 enables PC to communicate with XMC mezzanine module over PCIe bus. One XMC socket interfaces up to 8 serial I/O lanes to carrier's PCIe x8 edge connector, while another XMC socket routes to one pair of 4-lane serial ports for board-to-board connections that support up...

Read More »
Ethernet I/O Modules facilitate discrete device interfacing.
Controls & Controllers

Ethernet I/O Modules facilitate discrete device interfacing.

With dual Ethernet ports, removable front-facing terminal blocks, and support for rail power bus, BusWorks® XT Series interfaces discrete I/O signals directly to Ethernet/IP, Modbus/TCP, or Profinet measurement and control system network. USB port, also standard, provides PC connectivity for configuration and setup. Models XT1110 and XT1120 have sinking or sourcing outputs, respectively, as...

Read More »

Low-Cost Temperature Transmitters Receive ATEX Certification for Use in Zone 2 Hazardous Locations
Electrical Equipment & Systems

Low-Cost Temperature Transmitters Receive ATEX Certification for Use in Zone 2 Hazardous Locations

ST130 series head-mount transmitters with thermocouple or RTD inputs are now ATEX-approved for use in potentially explosive atmospheres with flammable gases present. Wixom, MI: Acromag's ST130 Series temperature transmitters recently received ATEX approval for use in explosive atmospheres. These thermocouple and RTD transmitters are USB-configured, loop-powered and provide a proportional 4-20mA...

Read More »
Carrier Card hosts Type 2 or Type 3 COM Express
Display & Presentation Equipment

Carrier Card hosts Type 2 or Type 3 COM Express

Featuring 95 x 125 mm footprint, Model ACEX4405 includes dual Gigabit Ethernet ports, RS232/422, and USB, plus mini PCIe slot for production or prototype systems. Board also provides dual SATA connectors, audio, and VGA video interfaces and has standard ATX power connector with LEDs for power and status indication. If additional cooling is required, carrier offers optional fan power interface....

Read More »
Four-Wire Process Transmitters support configuration via USB.
Electrical Equipment & Systems

Four-Wire Process Transmitters support configuration via USB.

Comprised of isolated signal conditioners, TT330 series supports high-density mounting on DIN rails and provides USB connection to PC for configuration using Windows® software. Several models are available to convert thermocouple, voltage, or current input signal types to choice of bipolar or unipolar ranges for proportional voltage or current output signals. Process signal converters are...

Read More »
Rugged COM Express Module Carrier Card features expansion slot.
Display & Presentation Equipment

Rugged COM Express Module Carrier Card features expansion slot.

Designed for Type 2 or Type 3 COM Express modules, ACEX4405 carrier board includes dual ports for GbE, RS232/422, and USB; mini PCIe expansion slot; dual SATA connectors; and audio and VGA video interfaces. CompactFlash socket with ejector accommodates scalable data storage. Measuring 95 x 125 mm, card also includes ATX power connector with LEDs and shock- and vibration-resistant locking and...

Read More »

All Topics