Acromag, Inc.
Wixom, MI 48393-2417
High-Density Signal Conditioners supports Bluetooth configuration.
Offering up to 0.05% accuracy, microBlox™ uB isolated signal conditioning modules safely interface voltage, current, temperature, frequency, and other field signals with- -
Read More »
PCIe-Based I/O Modules enable application specific customization.
Plugging into connectors on AcroPack™ carriers, AcroPack Series- general-purpose I/O modules add analog or digital input and output or communication in any combination for embedded computing applications. I/O is handled via 100-pin connector. Carrier- accommodates up to- 2 mini-PCIe or AcroPack mezzanine modules, and models of latter include those with 32 isolated digital inputs (AP440), 32...
Read More »Mezzanine Modules provide multi-channel 10 GbE interface.
Intended for data-intensive, real-time embedded computing systems, Models XMC-6260 and XMC-6280 achieve optimal performance using- TCP/IP offload engine ASIC connected to PCI Express Gen2 x8 interface. XMC-6260 has dual XAUI 10GBASE-KX4 ports and supports conduction-cooling or -40 to 85-
Read More »
Thermocouple Transmitters allow PC-based configuration via USB.
Model ST132 thermocouple/millivolt signal conditioner converts sensor input signals from 8 thermocouple types or -
Read More »
VPX Carrier Cards (3U) route signals to PMC/XMC modules.
Featuring 8-lane PCIe bus Gen 2 interface, VPX4810 board routes power and interface bus signals to plug-in XMC or PMC mezzanine module through VPX computer system's card slot connector. Product supports standard IEEE-1386.1 modules and conforms to VPX VITA 46.0, 46.4, and 46.9. VITA 48 option is also available for Ruggedized Enhanced Design Implementation. Also compatible with VITA 65 OpenVPX...
Read More »PMC I/O Module employs reconfigurable Virtex-5 FPGA.
Featuring Xilinx-® Virtex(TM)-5 FPGA with hard core PowerPC block, PMC-VFX module enables users to offload CPU-intensive operations such as video/3D data processing or floating-point math for system performance. It offers DDR2 DRAM and dual-port SRAM for high-speed DMA transfer to PCI bus. PMC base card provides 64 I/O channels or 32 LVDS lines accessible via P4 rear connectors, while PowerPC...
Read More »
Ethernet I/O Modules link analog sensors to control network.
EtherStax(TM) analog I/O models ES2151 and ES2152 interface 16 DC current inputs; 16 voltage inputs; and 16 current or voltage output signals, respectively; to Ethernet devices or controllers with Modbus TCP/IP or UDP/IP protocol communication. Suited for distributed I/O and SCADA applications, units Ethernet-enable input signals from 8B signal conditioning modules via DB25 port to monitor...
Read More »
Ethernet I/O Devices process 32 inputs and 16 outputs.
Suitable in Class I, Division 2, Group A, B, C, and D locations, EtherStax(TM) Series high-density Ethernet I/O blocks offer channel-isolated discrete I/O for I/O and SCADA applications. Models ES2116, ES2117, and ES2118 have 97-132 Vac, 20-60 Vdc, and 105-135 Vdc input ranges, respectively. Features include 10/100Base-TX copper and 100Base-FX connections, Modbus TCP/UDP/IP interface to host...
Read More »
I/O Modules combine configurable FPGA with DIO front-ends.
Models PMC-LX and PMC-SX support AXM plug-in I/O extension modules to interface different signal types to user-configurable Xilinx-® Virtex-4-® FPGA, which can process user-defined algorithms and custom logic routines on RS-485 differential, CMOS, or LVDS digital I/O (DIO) signals. While PMC-LX is optimized for high-performance logic with choice of LX40 or LX60 Virtex-4 FPGAs, PMC-SX uses SX35...
Read More »
Stackable Ethernet I/O Block processes 96 I/O signals.
Suited for distributed I/O and SCADA applications, EtherStax(TM) ES2113 offers Modbus TCP/UDP/IP communication to host controller and i2o-® technology for peer-to-peer communication between I/O units. Dual network ports support 10/100Base-TX copper and 100Base-FX fiber-optic connections and provide redundant communication path for critical applications. Embedded web page provides configuration...
Read More »
New Family of Signal Splitters are Software-Configured for Easy Setup and Precise Scaling of I/O Ranges
If you're looking for a powerful isolated signal splitter/duplicator that is easy to install and set up, check out this video and learn more about Acromag's exciting new SP230 series of splitters.
Read More »Acromag Appoints New National Sales Manager for Their Embedded Solutions Products Division
Acromag has promoted Greg Vitel to manage their North American network of sales representative offices and service strategic accounts for their embedded solutions product line. Wixom, MI – February 15, 2018 - To better service customers through their national distribution channels, Acromag has promoted Greg Vitel to the position of National Sales Manager for their Embedded Solutions Group....
Read More »Acromag and Ctek Partner to Provide Remote Monitoring and Control Solutions over Ethernet and Wireless Networks for IIoT Applications
New alliance unites Acromag’s rugged signal interface modules with Ctek’s controller and cellular communication devices for remote asset management and cloud-based monitoring solutions. Wixom, MI - January 8, 2018 - Acromag announced today a strategic partnership with CA-based Ctek, Inc. to offer complete monitoring and control solutions for customers to manage their remote assets. Combining...
Read More »Acromag Modernizes Sales Department Structure and Adds Business Development Manager and Vice President of Sales Positions
Wixom, Michigan: Acromag, Inc. (Dave Wolfe, President/COO) recently announced a reorganization of their Embedded Solutions and Process Automation Divisions. This reorganization will better align product planning with customer needs and to strengthen the sales channels. As part of the restructure, Mr. Russell J. Nieves accepted the position of Vice President of Sales and Mr. Robert M. Greenfield...
Read More »Acromag to Exhibit at AmCon Design & Manufacturing Show
Meet with Acromag's Electronic Contract Manufacturing sales team on November 1-2, 2016 and discuss your current manufacturing needs. WIXOM, Mich., Oct. 27, 2016 - Booth #216: Acromag, Inc., an internationally recognized leader with over 50 years' experience in the field of electronic design assembly have pioneered many breakthrough concepts in process instrumentation and embedded board solutions....
Read More »
High-Density Signal Conditioners supports Bluetooth configuration.
Offering up to 0.05% accuracy, microBlox™ uB isolated signal conditioning modules safely interface voltage, current, temperature, frequency, and other field signals with- -
Read More »
PCIe-Based I/O Modules enable application specific customization.
Plugging into connectors on AcroPack™ carriers, AcroPack Series- general-purpose I/O modules add analog or digital input and output or communication in any combination for embedded computing applications. I/O is handled via 100-pin connector. Carrier- accommodates up to- 2 mini-PCIe or AcroPack mezzanine modules, and models of latter include those with 32 isolated digital inputs (AP440), 32...
Read More »Acromag Forms New Electronic Contract Manufacturing Division, Hires New Business Development Manager
Acromag hires Ms. Stacy Z. Moore to lead the new Contract Manufacturing Division and develop long-term manufacturing partnerships. Wixom, MI –- Acromag, Inc., the leader in industrial I/O, announced today the formation of a new Contract Manufacturing Division at its 35,000 square foot facility located in Wixom, Michigan. The Electronic Contract Manufacturing Division will be led by Acromag’s...
Read More »Mezzanine Modules provide multi-channel 10 GbE interface.
Intended for data-intensive, real-time embedded computing systems, Models XMC-6260 and XMC-6280 achieve optimal performance using- TCP/IP offload engine ASIC connected to PCI Express Gen2 x8 interface. XMC-6260 has dual XAUI 10GBASE-KX4 ports and supports conduction-cooling or -40 to 85-
Read More »
Thermocouple Transmitters allow PC-based configuration via USB.
Model ST132 thermocouple/millivolt signal conditioner converts sensor input signals from 8 thermocouple types or -
Read More »