Nordson Sealant Equipment
Wixom, MI 48393
New Autoflex VI-RE Die Produces Uniform Film With 30% Better Tolerance
Die uses data from a computerized downstream gauging system to adjust the transverse thickness profile by making changes to the flexible upper lip of the die. Flexible lip is made-up of thermally actuated adjuster blocks that expand or contract to adjust the lip gap in areas of the film. Yields uniform film enhancing the printing and heat shrinking processes used for labels in packaging.
Read More »
Hand-Held Fluid Valves optimize dispensing ergonomics.
Vertical handle mounted 1270-857 Kiss(TM) Dispense Valves are suited for dispensing low- to high-viscosity 1-component adhesives, sealants, and lubricants including polyurethane, silicone, heat cure mastics, PVCs, and grease. Manual assembly consists of Kiss fluid dispense valve, 4-way pneumatic valve to start and stop fluid flow, mounting bracket for attaching to tool balance, and low-force...
Read More »Dispense Valve offers no-drip shut off.
Snuf-BakÃ-® Dispense Valve Series 2600-041 has suction-action when valve closes to eliminate or reduce strings and fluid drips from dispense tip providing for clean shut off of thixotropic and cohesive materials including viscous silicones, epoxies, and urethanes. Rated for 4,000 psi, valve is 1.5 in. square and 3.5 in. long. It is double air actuated with two 1/8 NPT ports for 4-way...
Read More »Mixing Valve enables color merging and dispensing.
Series 2600-019 Color Change Valves feature 2 or more color valves and 1 flush valve to merge colored fluids into 1 manifold and common applicator where selected color is dispensed. The manifold and applicator is flushed before each new color is introduced. Valve assemblies features Quick-Change(TM) color and flush valves, No-DripÃ-® fluid valves, and stainless steel wetted components. Valves...
Read More »
Fluid Valve provides precise on-off flow control.
Suited for medium to high-viscosity fluids, pneumatically actuated No-DripÃ-® Model 2600-060 features wear-resistant fluid seals, carbide seat, and tungsten-carbide ball-end needle with anti-abrasive, hard-coated shaft. Valve body has three 3/8 NPT inlet fluid ports and 3/8 NPT outlet port. Dowel and screw holes allow in-line or surface mounting. Rated for 5,000 psi, valve can be used to...
Read More »Meter-Mix Dispense System delivers repeatable results.
Able to work with most 2-component materials via its disposable No-Flush(TM) mixers, positive-displacement Servo-FloÃ-® 801-HV can dispense precise mixtures for different part configurations in batch or random processes. Servo-motor design enables consistent, repeatable bead profiles as well as change of flow rate during dispense cycle. Along with support for preset material-dispensing...
Read More »
Meter-Mix System provides preset dispensing profiles.
Servo-FloÃ-® 801-HV PD, 2-component meter-mix dispensing system features servo-motor design for consistent and repeatable bead profiles and change of flow rate during dispense cycle, providing dispense results from 0.2-18 cc at 1-to-1 ratio. System can be preset to vary flow rate during dispensing in automated, indexing, XYZ-motion, and robotic processes. Disposable No-Flush(TM) mixers...
Read More »
Dispense Valve prevents dripping and controls volume.
Designed for fluid control of level-seeking materials, Model 2600-001-006/7 Tip-SealÃ-® dispense valve consists of double-acting actuator, 13.7 in. extension nozzle, and carbide Tip-Seal needle to prevent dripping at shut-off. For high-volume fluid transfer, valve can flow up to 6 gpm with 0.406 in. orifice nozzle. Along with 29:1 air-to-fluid power ratio for flow control, product has Ã-¾...
Read More »New Design of Material Dispense Valves Improves Performance
PLYMOUTH, MI -- Sealant Equipment & Engineering, Inc.'s re-design of its 2200-Series mid-size dispense valves improves dispensing and operating performance for the user. The new design of these one-piece body valves includes the No-DripÃ-®, Snuf-Bak(TM) and Tip-SealÃ-® fluid-dispense-valve product families. Two new design features of the 2200-Series valves are a new needle for fluid-flow...
Read More »
Material Dispense Valve delivers precise beads.
Designed for precision dispensing of low- to high-viscosity flowables, Tip-SealÃ-® Model 2200-245-051 employs zero-cavity design for handling solvent-based, moisture-curing, and stringy materials. Sealing at tip prevents material from hardening in nozzle, oozing, or dripping. Pneumatically actuated valve has carbide tip, titanium-coated shaft, hardened seat, and wear-resistant fluid seals....
Read More »Awards Earned by ASYMTEK Products for Best New Product and Service Excellence at IPC APEX 2020
ASYMTEK wins its 16th Service Excellence Award Carlsbad, CA, USA - 19 February 2020 - ASYMTEK, a part of Nordson ELECTRONICS SOLUTIONS, a global leader in electronics manufacturing technologies, received two awards at IPC APEX Expo 2020: New Product Introduction (NPI) and Service Excellence. The Qadence™ Closed-Loop Flow Control System earned the NPI award in the Dispensing category. The...
Read More »
New Autoflex VI-RE Die Produces Uniform Film With 30% Better Tolerance
Die uses data from a computerized downstream gauging system to adjust the transverse thickness profile by making changes to the flexible upper lip of the die. Flexible lip is made-up of thermally actuated adjuster blocks that expand or contract to adjust the lip gap in areas of the film. Yields uniform film enhancing the printing and heat shrinking processes used for labels in packaging.
Read More »Nordson ASYMTEK to Present Paper on Dispensing for Chip-on-Wafer Packaging and Poster on Coating Applications for EMI Shielding at IMAPS Device Packaging Conference
Presented March 8 and 9 at WeKoPa Resort & Casino Scottsdale/Fountain Hills, AZ Carlsbad, CA, USA - 02 March 2017 - Nordson ASYMTEK, a Nordson company (NASDAQ: NDSN), a global leader in dispensing, jetting, and coating equipment and technologies, will present a technical paper and poster session at the IMAPS Device Packaging Conference being held at the WeKoPa Resort & Casino in...
Read More »
Hand-Held Fluid Valves optimize dispensing ergonomics.
Vertical handle mounted 1270-857 Kiss(TM) Dispense Valves are suited for dispensing low- to high-viscosity 1-component adhesives, sealants, and lubricants including polyurethane, silicone, heat cure mastics, PVCs, and grease. Manual assembly consists of Kiss fluid dispense valve, 4-way pneumatic valve to start and stop fluid flow, mounting bracket for attaching to tool balance, and low-force...
Read More »Fred Krautz Joins Sealant Equipment & Engineering
PLYMOUTH, MI - Fred Krautz has joined Sealant Equipment & Engineering as Western Region Account Manager covering the 11 western United States. Fred has over 15 years of extensive industry experience with meter mix and dispense equipment as an Area Sales Manager for the 11 Western States including time spent in Product Development and Marketing. He has provided technical sales and service support...
Read More »Kenneth A. Jacobs Joins Sealant Equipment & Engineering
October 1, 2008 PLYMOUTH, MI - Kenneth A. Jacobs has joined Sealant Equipment & Engineering as Vice President of Global Sales and Marketing. Mr. Jacobs has over 30 years of experience in the Meter Mix and Dispense industry. He recently was President of TAH Industries in Robbinsville, NJ and held various management positions over 26 years including Vice President of Sales, Executive VP and...
Read More »Dispense Valve offers no-drip shut off.
Snuf-BakÃ-® Dispense Valve Series 2600-041 has suction-action when valve closes to eliminate or reduce strings and fluid drips from dispense tip providing for clean shut off of thixotropic and cohesive materials including viscous silicones, epoxies, and urethanes. Rated for 4,000 psi, valve is 1.5 in. square and 3.5 in. long. It is double air actuated with two 1/8 NPT ports for 4-way...
Read More »Sealant Equipment & Engineering, Inc. Introduces Its New Brochure, Material Dispense Valves for Adhesives, Sealants and Lubricants
PLYMOUTH, MI -- Sealant Equipment & Engineering, Inc.'s new catalog Material Dispense Valves for applying Adhesives, Sealants and Lubricants is now available for free distribution. The new 12-page brochure, its 40th year edition, can be viewed and downloaded on the company's website at www.SealantEquipment.com/catalog/mat-dispense.htm. A free print copy of the brochure can be ordered at...
Read More »Sealant Equipment & Engineering, Inc. Introduces Its New Brochure, Meter Mix Dispense Systems for Adhesives, Sealants and Lubricants
PLYMOUTH, MI -- Sealant Equipment & Engineering, Inc.'s new product brochure, Meter Mix Dispense Systems for Adhesives, Sealants and Lubricants is now available by mail and on the company's website at SealantEquipment.com/catalog. The new brochure, its 40th year edition, has been expanded to six product sections: Principles of Meter Design, 2-part Meter-Mix Dispensing Systems; 1-part Dispensing...
Read More »Mixing Valve enables color merging and dispensing.
Series 2600-019 Color Change Valves feature 2 or more color valves and 1 flush valve to merge colored fluids into 1 manifold and common applicator where selected color is dispensed. The manifold and applicator is flushed before each new color is introduced. Valve assemblies features Quick-Change(TM) color and flush valves, No-DripÃ-® fluid valves, and stainless steel wetted components. Valves...
Read More »