Marposs Corp.
Auburn Hills, MI 48326
Mida Optical Twin Probe System Streamlines Machine Tool Applications - New from Marposs at WESTEC 2009
January 30, 2008, Auburn Hills, MI - A new system that enables the installation of both tool setting and part inspection probes onto machine tools using a single wireless interface unit will be presented by Marposs Corp. at WESTEC 2009 in booth 2519, March 30 - April 2, in Los Angeles. The new Mida Optical Twin Probe System, which incorporates an extremely compact, tube-type Optical Receiver...
Read More »
New Marposs Measurement Products for IMTS Incorporate Advanced Technologies
Embedded and BluetoothÃ-® wireless technologies provide convenience and enhance reliability of gauge computer and bore plugs. Auburn Hills, MI May 23, 2006 - Marposs Corp. will introduce its Merlin(TM) gauge computer based on embedded technology and its M1 Wave(TM) electronic bore gauge containing BluetoothÃ-® wireless technology at IMTS 2006 in booth D-4514. The new Merlin compact...
Read More »
Measuring Machine inspects shaft dimensions.
Fully automatic Optoflex(TM) M110 utilizes shadow cast optoelectronic technology, which allows for inspection of wide variety of parts while performing many different types of measurements. It measures parts up to 200 mm diameter with max length of 800 mm and max weight of 80 kg. Machine checks static and dynamic diameters, roundness, stroke and index, and straightness, and performs profile...
Read More »
Bore Gauge provides durable inspection solution.
M1 Star(TM) MBG mechanical bore gauge checks ID and ovality or taper of through, blind, and super blind bores. Mechanical measurement-transmission system lasts over 10,000,000 measuring cycles and interfaces with any dial indicator, digital indicator, or pencil probe. Application range is 0.12-11.81 in. Modular measuring head facilitates retooling with removable nosepiece and contacts.
Read More »
In-Process Gauge includes roundness control function.
Fenar L gauge system allows checking roundness of crankshaft main or pin journal diameter immediately after grinding, without removing part from machine. It is capable of controlling size on both mains and pins, in range up to 25 mm, without mechanical adjustment. Chordal measurement across 3 contact points can be accomplished with 1-2 rotations of part. Data stream from gauge is sent to PC,...
Read More »
Process Control Device has networking capability.
With networking capability based on Ethernet networking standard, multifunctional P7 manages machine tools by means of preprocess, inprocess, and postprocess measurement controls; shape control; and touch probe control. It also offers automatic wheel balancing and optimizes wheel feed and dressing cycles of grinders through acoustic analysis. Networking capability also enables off-sight...
Read More »
Modular Flat Panel PC survives in shop-floor environments.
Measuring 1.77 in. in depth, Model E9066T features 15 in. active matrix LCD display, built-in Ethernet port, 2 USB ports, and all standard computer interface ports. In addition to standard panel mount, options for cabinet and free-standing pedestal, swing-arm, and DIN rail mounting are available. Functioning in operating temperatures of 32-104Ã-
Read More »Marposs Acquires German Process Monitoring Supplier, ARTIS
Auburn Hills, MI, January 14, 2008 - Marposs Corp., a leading supplier of precision metrology equipment, announced that its parent firm, Marposs S.p.A., Bologna, Italy, has acquired control of ARTIS Gesellschaft fÃ-¼r angewandte Messtechnik GmbH, a developer, manufacturer and supplier of process monitoring solutions, located in Bispingen near Hamburg, Germany. The company's North American...
Read More »
Mida Optical Twin Probe System Streamlines Machine Tool Applications - New from Marposs at WESTEC 2009
January 30, 2008, Auburn Hills, MI - A new system that enables the installation of both tool setting and part inspection probes onto machine tools using a single wireless interface unit will be presented by Marposs Corp. at WESTEC 2009 in booth 2519, March 30 - April 2, in Los Angeles. The new Mida Optical Twin Probe System, which incorporates an extremely compact, tube-type Optical Receiver...
Read More »
New Marposs Measurement Products for IMTS Incorporate Advanced Technologies
Embedded and BluetoothÃ-® wireless technologies provide convenience and enhance reliability of gauge computer and bore plugs. Auburn Hills, MI May 23, 2006 - Marposs Corp. will introduce its Merlin(TM) gauge computer based on embedded technology and its M1 Wave(TM) electronic bore gauge containing BluetoothÃ-® wireless technology at IMTS 2006 in booth D-4514. The new Merlin compact...
Read More »
Measuring Machine inspects shaft dimensions.
Fully automatic Optoflex(TM) M110 utilizes shadow cast optoelectronic technology, which allows for inspection of wide variety of parts while performing many different types of measurements. It measures parts up to 200 mm diameter with max length of 800 mm and max weight of 80 kg. Machine checks static and dynamic diameters, roundness, stroke and index, and straightness, and performs profile...
Read More »
Bore Gauge provides durable inspection solution.
M1 Star(TM) MBG mechanical bore gauge checks ID and ovality or taper of through, blind, and super blind bores. Mechanical measurement-transmission system lasts over 10,000,000 measuring cycles and interfaces with any dial indicator, digital indicator, or pencil probe. Application range is 0.12-11.81 in. Modular measuring head facilitates retooling with removable nosepiece and contacts.
Read More »
In-Process Gauge includes roundness control function.
Fenar L gauge system allows checking roundness of crankshaft main or pin journal diameter immediately after grinding, without removing part from machine. It is capable of controlling size on both mains and pins, in range up to 25 mm, without mechanical adjustment. Chordal measurement across 3 contact points can be accomplished with 1-2 rotations of part. Data stream from gauge is sent to PC,...
Read More »
Process Control Device has networking capability.
With networking capability based on Ethernet networking standard, multifunctional P7 manages machine tools by means of preprocess, inprocess, and postprocess measurement controls; shape control; and touch probe control. It also offers automatic wheel balancing and optimizes wheel feed and dressing cycles of grinders through acoustic analysis. Networking capability also enables off-sight...
Read More »
Modular Flat Panel PC survives in shop-floor environments.
Measuring 1.77 in. in depth, Model E9066T features 15 in. active matrix LCD display, built-in Ethernet port, 2 USB ports, and all standard computer interface ports. In addition to standard panel mount, options for cabinet and free-standing pedestal, swing-arm, and DIN rail mounting are available. Functioning in operating temperatures of 32-104Ã-
Read More »