Reed Manufacturing Co.
Erie, PA 16512
New Oiler System with Sturdy Aluminum Oil Gun
Offers 20-gauge steel bucket and steel drip pan/chip tray plus a deep bucket at 8-1/2 inches. OLLID locking lid protects oil from weather events and transit messes. Reduce splashes and sloshes with optional OLGUARD splash guard.
Read More »
New Bear Hug PE Squeeze Tool System Provide 83,400 Pounds of Squeeze Force
Features a double bar configuration for most confident squeeze. Allows choice of manual or air-over-hydraulic pump operation. Bottom swing-out bar with latch allows for simple pipe enclosure.
Read More »
Latest Pipe Cutters are Ideal for Medium and High-Density PE Pipe
Accurate cuts ensure that no facing is needed for electrofusion. Slight taper on blade allows an unchallenging start to the cut and holds form for straight cut. Produces square cuts with no chips to clog valves and small openings.
Read More »
New CPDWW Cordless Power Drive with Power Kick-off Feature
Power switch has locking position, but stops almost immediately when released. Battery power eliminates the need for extra equipment on the truck. Adapts to drilling and tapping machines or attaches to exercise valves.
Read More »
New Cordless Pipe Bevelers Trim Small to Large Diameter Plastic Pipe
Reduces prep time by consistently beveling on multiple cuts. Adjustable for Bevel Length up to 1 in. and the guide plate eliminates guesswork. RPMs from the powerful die grinder provide smooth cuts when paired with REED router bit.
Read More »
New Beveler Adapters Allow Operator to Work with The Battery System of Their Choice
Adapters permit temporary conversion of the die grinder to serve as a plastic pipe beveler. Guide plate eliminates guesswork and yields a consistent result as well as it is battery-powered. RPMs from the powerful die grinder provide smooth cuts when paired with REED carbide router bits.
Read More »
New L4N1XP Ratchet Wrench Comes with Rugged Grip Handle
Features sealed ratchets for best performance and extra protection for jobsite conditions. Ideal for water, sewer and gas installations and maintenance. Offers four sockets (1-1/4 in., 1-1/8 in., 1-1/16 in. and 15/16 in.) in dog bone configuration are designed to stay on the handle.
Read More »
REED PDEB250 Cone Chamfering Tool comes with hardened steel blade.
Designed to fit pipes from ¾ to 2 ½ inch nominal diameters, REED PDEB250 Cone Chamfering Tool can be used with drill power or manually. Used for chamfering inside and outside diameters of plastic pipe, unit comes in cone shape.
Read More »
R450PAL Reed Carry Light Tripod Vise comes with aluminum legs.
R450PAL Reed Carry Light™ Tripod Vise is suitable for plastic pipe load applications. Unit comes with straight cranking handle, cushioned handle grip and features chain vise style. Product is equipped with double-sided bowtie jaws with neoprene side for plastic pipe and steel jaws for metal pipe. Vise is suitable for weight-critical field use and odd-shaped work piece applications.
Read More »
Power Pipe Beveler is equipped with 4 Amp Lithium-Ion battery.
Cordless Power Pipe Beveler is used to bevel plastic pipe of 2 in. and larger diameter. Suitable for PVC glued joints, bell and gasket joints, unit’s kit consists of beveler attachment which is powered by a 22,000 RPM, 18V cordless die grinder. Product comes with RBIT1 which is a four flute carbide router bit and cuts a 15° external bevel up to 5/8 in. long. Beveler features an optional RBIT2...
Read More »
New Oiler System with Sturdy Aluminum Oil Gun
Offers 20-gauge steel bucket and steel drip pan/chip tray plus a deep bucket at 8-1/2 inches. OLLID locking lid protects oil from weather events and transit messes. Reduce splashes and sloshes with optional OLGUARD splash guard.
Read More »
New Bear Hug PE Squeeze Tool System Provide 83,400 Pounds of Squeeze Force
Features a double bar configuration for most confident squeeze. Allows choice of manual or air-over-hydraulic pump operation. Bottom swing-out bar with latch allows for simple pipe enclosure.
Read More »
Latest Pipe Cutters are Ideal for Medium and High-Density PE Pipe
Accurate cuts ensure that no facing is needed for electrofusion. Slight taper on blade allows an unchallenging start to the cut and holds form for straight cut. Produces square cuts with no chips to clog valves and small openings.
Read More »
New CPDWW Cordless Power Drive with Power Kick-off Feature
Power switch has locking position, but stops almost immediately when released. Battery power eliminates the need for extra equipment on the truck. Adapts to drilling and tapping machines or attaches to exercise valves.
Read More »
New Cordless Pipe Bevelers Trim Small to Large Diameter Plastic Pipe
Reduces prep time by consistently beveling on multiple cuts. Adjustable for Bevel Length up to 1 in. and the guide plate eliminates guesswork. RPMs from the powerful die grinder provide smooth cuts when paired with REED router bit.
Read More »
New Beveler Adapters Allow Operator to Work with The Battery System of Their Choice
Adapters permit temporary conversion of the die grinder to serve as a plastic pipe beveler. Guide plate eliminates guesswork and yields a consistent result as well as it is battery-powered. RPMs from the powerful die grinder provide smooth cuts when paired with REED carbide router bits.
Read More »
New L4N1XP Ratchet Wrench Comes with Rugged Grip Handle
Features sealed ratchets for best performance and extra protection for jobsite conditions. Ideal for water, sewer and gas installations and maintenance. Offers four sockets (1-1/4 in., 1-1/8 in., 1-1/16 in. and 15/16 in.) in dog bone configuration are designed to stay on the handle.
Read More »REED Adds Reinecke as Regional Manager for Southeast US
Reed Manufacturing welcomes Dan Reinecke as our new Regional Manager for the Alabama, Florida, Georgia, Mississippi, North Carolina, South Carolina, and Tennessee markets. Dan will serve key REED accounts, work with Manufacturer’s Reps, and focus on developing new business in this seven state area. Before joining REED, Dan worked for Kapro Tools as OEM sales manager and for 10 years at...
Read More »
REED PDEB250 Cone Chamfering Tool comes with hardened steel blade.
Designed to fit pipes from ¾ to 2 ½ inch nominal diameters, REED PDEB250 Cone Chamfering Tool can be used with drill power or manually. Used for chamfering inside and outside diameters of plastic pipe, unit comes in cone shape.
Read More »
R450PAL Reed Carry Light Tripod Vise comes with aluminum legs.
R450PAL Reed Carry Light™ Tripod Vise is suitable for plastic pipe load applications. Unit comes with straight cranking handle, cushioned handle grip and features chain vise style. Product is equipped with double-sided bowtie jaws with neoprene side for plastic pipe and steel jaws for metal pipe. Vise is suitable for weight-critical field use and odd-shaped work piece applications.
Read More »