Strainsert Co.

West Conshohocken, PA 19428

New Strain Gage Modules for Single and Multiple Sensor Systems
Analog 4-20 mA strain gage module converts bridge sensor output into a 4-20 mA current loop. Powered by a DC power supply and is measured by remote instrumentation. DSC digital strain gage module offers up to 500 readings/second.
Read More »
New e DSC and DSC-USB Strain Gage Module Offers Accuracy, Reliability and Stability
DSC digital strain gage module offers up to 500 readings/second. DSC-USB Strain Gage module provides USB connectivity powered by the host USB. Delivers 200 samples per second at 18 bit resolution and appears as a virtual COM port.
Read More »
New Wireless Load Cell System and Pin are Ideal for Both Single and Multiple Sensor Systems
Offer transmission range of up to 2,600 Feet. Features license free 2.4 GHz telemetry that enhances efficiency and productivity in the field. Applications include aerospace, energy, industrial weighing, construction and automotive industries.
Read More »
Latest Crosstalk Correction Process is Used to Mathematically Correct for Signal Error
Provides correction with higher degree of precision for all angles and force magnitudes. Minimizes Crosstalk error and provides viable solution to applications that require measurements at an unknown load direction. Offers result that improves both magnitude and angle accuracies in the region of interest for the given bi-axial pin.
Read More »
Wireless Force Sensors are designed for in-field measurement.
Intended for use with Strainsert full bridge 350 Ω sensors, J-Unit1 wireless load cell receiver/transmitter incorporates embedded, factory-programmable radio. Also available, CW 900 MHz stand-alone wireless load pin sensor incorporates fully embedded factory programmable radio that eliminates need for cable runs. Both sensors let users perform calibration adjustments in field, support...
Read More »
Strainsert Introduces New, On Demand, Force Sensor Calibration Certificate Service to Review/Download Completed Reports Online
Strainsert, a premier manufacturer of standard and custom force sensors for research, testing, weighing and control applications in the Aerospace, Military, Marine and Automotive industries, has launched this new online service to allow customers to review/download completed reports. The on demand calibration certificate online service will be available for force sensors calibrated by Strainsert...
Read More »
Strainsert Introduces: Custom Load Pin Configurator
Strainsert is proud to announce the launch of their new custom Load Pin Configurator; a unique online configuration tool developed by Strainsert for custom load pin applications. This online tool allows engineers and/or designers to input nominal design parameters to determine application feasibility and generate conceptual load pin designs/drawings quickly and effectively. All finalized...
Read More »Force Sensing Load Pins come in custom designs.
Available via quick ship program, CPA Series utilizes internal strain gage transducer process, offering precision force measurement by replacing existing shear pins, clevis bolts, load pins, shear axles, and many other types of pinned joints in aerospace, automotive, marine, and military applications. In addition to standard load pin lines, Strainsert offers custom services, where sensors are...
Read More »
Forty Two Strainsert Custom Force Sensors Deployed on the Mars Rover Curiosity
Strainsert Company, a premier manufacturer of standard and custom force sensors for research, testing, weighing and control applications in the Aerospace, Military, Marine and Automotive industries, designed and manufactured forty two custom force sensors utilized on the Mars Rover Curiosity which recently landed successfully on the red planet. Conshohocken, PA - The Curiosity, part of the Mars...
Read More »
Force Tranducer is shock and vibration qualified.
Force Transducer is available with internally gaged, force sensing clevis pins and instrumentation packages in shock-qualified configurations to MIL-901D specifications. Similar clevis pin designs, incorporating internal 4-20 mA amplifiers, have also been qualified for specific vibration environments. Internal gaging is environmentally protected.
Read More »
New Strain Gage Modules for Single and Multiple Sensor Systems
Analog 4-20 mA strain gage module converts bridge sensor output into a 4-20 mA current loop. Powered by a DC power supply and is measured by remote instrumentation. DSC digital strain gage module offers up to 500 readings/second.
Read More »
New e DSC and DSC-USB Strain Gage Module Offers Accuracy, Reliability and Stability
DSC digital strain gage module offers up to 500 readings/second. DSC-USB Strain Gage module provides USB connectivity powered by the host USB. Delivers 200 samples per second at 18 bit resolution and appears as a virtual COM port.
Read More »
New Wireless Load Cell System and Pin are Ideal for Both Single and Multiple Sensor Systems
Offer transmission range of up to 2,600 Feet. Features license free 2.4 GHz telemetry that enhances efficiency and productivity in the field. Applications include aerospace, energy, industrial weighing, construction and automotive industries.
Read More »
Latest Crosstalk Correction Process is Used to Mathematically Correct for Signal Error
Provides correction with higher degree of precision for all angles and force magnitudes. Minimizes Crosstalk error and provides viable solution to applications that require measurements at an unknown load direction. Offers result that improves both magnitude and angle accuracies in the region of interest for the given bi-axial pin.
Read More »Strainsert Now Offering 48 Hour Turnaround Time of CPA Series Force Sensing Load Pins for Quick Ship Program
Strainsert, a premier manufacturer of accurate standard and custom force sensors for research, testing, weighing and control applications in the Aerospace, Military, Marine and Automotive industries, has improved the turnaround time of their unique CPA Series Load Pin product line from 72 to 48 hours for the quick ship program. Strainsert introduced a new quick ship program for CPA Series force...
Read More »Strainsert's Engineering Staff Earns Special Achievement Award from NASA's Capsule Parachute Assembly System (CPAS) Team
Strainsert is proud to announce their engineering staff earned a Special Achievement Award from NASA’s Capsule Parachute Assembly System (CPAS) Team. The CPAS team is developing the parachutes for Orion, which is NASA’s spacecraft that will send humans to deep space destinations on missions beyond the moon and bring them home safely. The award recognizes vital assistance in conceiving,...
Read More »
Wireless Force Sensors are designed for in-field measurement.
Intended for use with Strainsert full bridge 350 Ω sensors, J-Unit1 wireless load cell receiver/transmitter incorporates embedded, factory-programmable radio. Also available, CW 900 MHz stand-alone wireless load pin sensor incorporates fully embedded factory programmable radio that eliminates need for cable runs. Both sensors let users perform calibration adjustments in field, support...
Read More »
Strainsert Introduces New, On Demand, Force Sensor Calibration Certificate Service to Review/Download Completed Reports Online
Strainsert, a premier manufacturer of standard and custom force sensors for research, testing, weighing and control applications in the Aerospace, Military, Marine and Automotive industries, has launched this new online service to allow customers to review/download completed reports. The on demand calibration certificate online service will be available for force sensors calibrated by Strainsert...
Read More »
Strainsert Introduces: Custom Load Pin Configurator
Strainsert is proud to announce the launch of their new custom Load Pin Configurator; a unique online configuration tool developed by Strainsert for custom load pin applications. This online tool allows engineers and/or designers to input nominal design parameters to determine application feasibility and generate conceptual load pin designs/drawings quickly and effectively. All finalized...
Read More »Force Sensing Load Pins come in custom designs.
Available via quick ship program, CPA Series utilizes internal strain gage transducer process, offering precision force measurement by replacing existing shear pins, clevis bolts, load pins, shear axles, and many other types of pinned joints in aerospace, automotive, marine, and military applications. In addition to standard load pin lines, Strainsert offers custom services, where sensors are...
Read More »