Laboratory Testing, Inc.
Hatfield, PA 19440
Laboratory Testing Inc. Exhibiting at NACE Corrosion 2016 in Booth #942
HATFIELD, PA – Laboratory Testing Inc. (LTI) is returning again this year to the NACE Corrosion Expo as an exhibitor in Booth #942. LTI has been exhibiting at NACE for more than 10 years, presenting their expertise in the metal testing industry. Included in the Lab’s portfolio of services is a full array of corrosion testing and analysis focused on helping clients prevent corrosion, evaluate...
Read More »Laboratory Testing Inc. Approved as Commercial Testing Laboratory for Sandia National Laboratories
Laboratory Testing Inc. (LTI) of Hatfield, PA has been approved as a Commercial Testing Laboratory (CTL) for Sandia National Laboratories headquartered in Albuquerque, NM. The Commercial Testing Laboratory grants approval to LTI to make critical measurements associated with mechanical testing and chemical testing. Approval was awarded after a review of Laboratory Testing Inc.'s measurement...
Read More »Laboratory Testing Inc. Announces Continuation of Nadcap Accreditation
HATFIELD, PA – Laboratory Testing Inc. (LTI) was successfully audited and approved for continued accreditation by the Performance Review Institute Aerospace Program (PRI Nadcap). The renewed Nadcap accreditations demonstrate conformance for Nondestructive Testing services (Liquid Penetrant Testing, Magnetic Particle Inspection, Ultrasonic Testing) and Aerospace Quality Systems AC7004. The...
Read More »Laboratory Testing Inc. Exhibiting At National Industrial Fastener and Mill Supply Expo
HATFIELD, PA – Laboratory Testing Inc. (LTI) will once again be exhibiting at the National Industrial Fastener and Mill Supply Expo (NIFMSE) in Booth #816 on October 21 – 23, 2015 at the Sands Expo Center in Las Vegas, NV. The Lab will be showcasing its broad range of fastener testing, dimensional inspection and failure analysis capabilities. LTI is a full-service materials testing,...
Read More »Laboratory Testing Inc. Exhibiting at Titanium USA 2015
Laboratory Testing Inc. (LTI) will be exhibiting at Titanium USA 2015 in Booth #712 from October 4th through October 7th at the Rosen Shingle Creek Golf Resort in Orlando, Florida. LTI offers a wide range of mechanical testing, metallography and chemistry services that can evaluate material composition and the effects of heat treatments on titanium materials. Ultrasonic testing and other...
Read More »Laboratory Testing Inc. Announces Continuation of A2LA Accreditation and Expanded Scope
Laboratory Testing Inc. (LTI) was successfully audited and approved for continued accreditation by the American Association for Laboratory Accreditation (A2LA) in accordance with ISO/IEC 17025-2005. The scope of LTI's A2LA accreditation was also expanded for mechanical testing and calibration services. Bore micrometers were added to the calibration certificate. The expanded mechanical testing...
Read More »Laboratory Testing Inc. Receives Gulfstream Aerospace Approval
HATFIELD, PA – Laboratory Testing Inc. (LTI) of Hatfield, PA has been approved by Gulfstream Aerospace as a supplier of material testing services. The approval was granted on November 20, 2014 following a complete facilities survey and examination of the Quality Control/Assurance system, and will be valid for three years. The certificate of approval lists a wide-range of material testing...
Read More »Laboratory Testing Inc. to Spotlight Material Testing and Calibration at Fabtech 2014
HATFIELD, PA – Laboratory Testing Inc. (LTI) will be exhibiting at the Fabtech Expo on November 11-13, 2014. The Hatfield, PA company is a leader in material testing, nondestructive testing (NDT) and calibration services and has been an exhibitor at Fabtech since 2006. LTI will present its wide array of expert capabilities in Booth C1107. The show is set to take place at the Georgia World...
Read More »Laboratory Testing Inc. Featuring Fastener Testing at National Industrial Fastener Expo
HATFIELD, PA – Laboratory Testing Inc. (LTI) will be featuring its fastener testing capabilities, as well as other material testing, nondestructive testing, dimensional inspection and calibration services in Booth #623 at the 2014 National Industrial Fastener Mill Supply Expo. The Expo will be open to visitors on October 23 and 24, 2014 at the Sands Expo Convention Center in Las Vegas, NV....
Read More »Contamination Control Services include testing, certification.
Contamination Control services will include NIST-traceable calibration certificates, 24/7 technical support, and on-site service scheduled directly with- field technician. In addition to- hood testing, clean room certification, and- USP 797 testing, service includes- such procedures as- viable microbial sampling,- particle count,- decontamination,- ventilation assessments, and custom...
Read More »Third-Generation Family Member Becomes President of Laboratory Testing Inc.
Hatfield, PA, December 4, 2019 – After 25 years as president of Laboratory Testing Inc. (LTI), Michael J. McVaugh is retiring from the position and turning over the title to his son, Brandon McVaugh. Mike will remain CEO of the family-run business that was started by his father, Robert (Bob) W. McVaugh, Sr. Mike McVaugh began working with his father back in 1982, when Bob co-owned the NDT...
Read More »Laboratory Testing Inc. Receives Nadcap Accreditation for Z2 Low Stress Grinding & Polishing
HATFIELD, PA, December 11, 2018 – Laboratory Testing Inc. (LTI) has expanded its scope of Nadcap accreditation with the addition of Z2 Low Stress Grinding and Polishing for fatigue specimen preparation. LTI’s fracture mechanics lab performs High-Cycle Fatigue, Low-Cycle Fatigue, Fatigue Crack Growth and Fracture Toughness Testing services. The in-house machine shop prepares specimens required...
Read More »General Manager Hired to Oversee TACTIC Division of Laboratory Testing Inc.
HATFIELD, PA, October 30, 2018 – Laboratory Testing Inc. (LTI) has hired a General Manager to oversee its new ultrasonic testing (UT) equipment division, TAC Technical Instrument Corporation (TACTIC), in Trenton, New Jersey. The position was filled by Michael Coulton, who brings over 30 years of high-level leadership experience to the company. As General Manager of TACTIC, Coulton will have...
Read More »Fracture Mechanics Lab Manager Joins Laboratory Testing Inc.
HATFIELD, PA, September 7, 2018 – Dr. Mehrdad Zoroufi has joined Laboratory Testing Inc. (LTI) as the Fracture Mechanics Lab Manager. In this capacity, he will be responsible for overseeing the operation of the Fracture Mechanics Test Lab and handling proposals for fatigue crack growth, fracture toughness, high-cycle fatigue and other testing performed by the department. Dr. Zoroufi received a...
Read More »Laboratory Testing Inc. Acquires TAC Technical Instrument Corp. of New Jersey
HATFIELD, PA, July 23, 2018 – Laboratory Testing Inc. (LTI) of Hatfield, PA has purchased TAC Technical Instrument Corp. (TACTIC) of Trenton, New Jersey. TACTIC has been in the ultrasonic inspection business since 1962, developing and selling a product line of immersion ultrasonic inspection systems and accessories, providing parts, repairs and training and performing independent ultrasonic...
Read More »Laboratory Testing Inc. Exhibiting at Titanium 2016 in Booth #712
HATFIELD, PA, September 12, 2016 – Laboratory Testing Inc. (LTI), a metals testing and calibration company, will be exhibiting in booth #712 at the Titanium USA 2016 trade show in Scottsdale, Arizona. LTI performs a wide range of chemistry, metallography, mechanical testing and nondestructive testing services that are performed on all types of ferrous and nonferrous metals, alloys, composites...
Read More »Laboratory Testing Inc. Obtains GE S-400 Crack Propagation Measurement Approval
HATFIELD, PA, September 14, 2016 - Laboratory Testing Inc. (LTI) of Hatfield, PA has received an updated special process certification, GT193, from GE Transportation Aviation. LTI is now certified for S-400 code AIXE, granting LTI the approval to perform Crack Propagation Measurement, also known as Fatigue Crack Growth Testing, for GE Transportation Aviation. The Laboratory is a leading provider...
Read More »Laboratory Testing Inc. Radiographic Inspection Article in Quality Magazine
HATFIELD, PA, September 14, 2016 - An article entitled “Inspecting Plastics and Electronics with Conventional X-ray” by Jason Tucker, X-ray Supervisor at Laboratory Testing Inc. (LTI), was published in the June 2016 issue of Quality Magazine. The article explains that industrial radiography is no longer primarily a metal inspection process. There is a growing demand for Radiographic or X-ray...
Read More »Laboratory Testing Inc.'s President Honored with SmartCEO's Family Business Award
HATFIELD, PA – Mike McVaugh, president and CEO of Laboratory Testing Inc. (LTI), has been named a 2016 Family Business Awards honoree by Philadelphia SmartCEO. McVaugh was chosen from a distinguished group of talented individuals who hold a top leadership role in their family-owned and operated companies. Honorees were chosen after submitting information on various business issues, including...
Read More »Laboratory Testing Inc. Scheduled to Exhibit at Design-2-Part Show
HATFIELD, PA – Laboratory Testing Inc. (LTI) will be exhibiting at Design-2-Part 2016 in Booth #240 on April 13th and 14th. This year’s show is being held at the Meadowlands Exposition Center in Secaucus, NJ. LTI offers a wide-range of materials testing and non-destructive testing (NDT) services to evaluate raw materials, component parts and finished products. The Lab also has a full-service...
Read More »