Megger
Norristown, PA 19401
Distribution Profilers evaluate loading.
Intended for power utilities, Series MDP provides information to evaluate loading on feeders/overhead lines and to identify needed upgrades. Customers can record currents up to 1,000 A, with additional 200 A over-range. All 3 models offer wide range of data retrieval options and virtually unlimited data recording. Software provides waveform capture and harmonic analysis up to 32nd order,...
Read More »
Insulation/Continuity Testers range from 10-1,000 V.
Conforming to IEC1010-2 for Category IV 600 V applications, Series MIT400 features dual digital and analog arc displays showing measurement result and actual test voltage being delivered simultaneously. For low voltage insulation testing, units offer user-selectable 10-100 V in 1 V increments. Insulation resistance measurements range from 20-200 GW, and continuity measurement of 200 mA is...
Read More »Insulation Testers measure voltage/current/capacitance.
Base model, MIT510, comes with 5 pre-programmed test voltages from 250-5,000 V and measures to 15 TW on digital scale. Adding to previous model's capabilities, MIT520 offers ability to step up voltage in 10 V increments from 50-1,000 V and 25 V increments beyond 1,000 V. It also includes pass/fail alarm, various tests, 32k data storage, and RS232 or USB downloading capabilities. Also available,...
Read More »Digital Multimeters suit general-purpose testing.
Offering range of measurement modes for ac and dc applications, resistance, and current measurements, Models AVO300 and AVO310 are fully autoranging for immediate testing. Voltage measurements up to 1,000 V are permitted without damage to instruments. Three ranges are provided for ac or dc current measurement from 0.1 Ã-µA to 10 A. Large, 3Ã-½-digit LCD display on Model AVO300 can be read...
Read More »Ground Testers are suited for ground rod testing.
Model DET3TD is digital 3-terminal instrument for grounding and bonding tests, and digital 4-terminal Model DET4TD adds resistivity measurement. Products are also available as analog, 3-terminal Model DET3TA and Model DET3TC, which adds current measuring function for ART (Attached Rod Technique) testing capabilities. Rated to IP54, all instruments include voltmeter, measure resistance from...
Read More »
Transformer Turns Ratio Set provides -
Suited for single- and 3-phase transformer testing, automatic Model TTR25 measures turns ratio of 20,000:1 in less than 5 seconds and locates problems in transformer windings and magnetic core circuits. Unit also measures excitation current as well as normal and reverse polarity of single-phase transformers. Battery-operated tester features single-button operation, quick-start guide on front...
Read More »
Digital Clamp Meter features dual function clamp.
MMC850 Multi-core ac digital clamp meter features design that eliminates need to split cable, remove panels or open outlet boxes to access single conductors. Planer magnetic sensor coils calculate current in flat or round multi-core cable to 100 A. Meter features backlit display, positive finger guard for comfortable grip, and inner jaw clamp to centralize cables. Unit suits electrical...
Read More »Software manages electrical acceptance/maintenance testing.
PowerDB(TM) provides data management for electric utility, industrial, or electrical testing service company acceptance and maintenance testing jobs. Opening specific record shows information about job, such as type of service, order date, sales contact, and invoice information. Job information and test results can be transferred between field-use databases and master database. Other capabilities...
Read More »Interconnect adds high output capability to relay test set.
Interface Unit, Model MEIU allows MPRT relay test set to control either multi-amp Epoch II or Epoch 20 unit for specialized testing capability. User employing MPRT can operate Epoch II or 20 unit manually using TouchView Interface or automatically using AVTS software. When used with 3-channel MPRT, interconnect device allows user to manually control up to 3 Epoch II/20 units for applications such...
Read More »
Power Quality Analyzers come with reporting software.
Models PA-9 and PA9Plus are offered with MetReport Software, which lets users create customized report templates for power quality studies, harmonics analysis, power factor and energy consultation, tolerance curve studies, auto data analysis pass/fail reports, and EN50160 compliance. It uses graphical toolbar and wizard interface, grouped within embedded Report Wizard function, to generate up to...
Read More »Megger Raises $17,800 for Phoenix Childrenâ™s Hospital Foundation
19th annual Megger Distributor Golf Outing also Supports HopeKids of Arizona and 4 Paws for Ability Norristown, Pa. February 2020 – Megger held its 19th annual Distributor Golf Outing on Saturday, January 25, raising $19,600. $17,800 was donated to Phoenix Children’s Hospital Foundation; $1,000 went to HopeKids of Arizona, an organization that provides ongoing events, activities and a...
Read More »Megger Raises $14,765 for Phoenix Childrenâ™s Hospital Foundation
18th annual Megger Distributor Golf Event pays tribute to 22-year-old cancer survivor Norristown, Pa. March 2019 – Megger held its 18th annual Distributor Golf Event on Saturday, January 26 and raised a total of $14,765 for Phoenix Children’s Hospital Foundation. The much anticipated event, held once again at Ahwatukee Country Club in Phoenix, Arizona, is organized in honor of 22-year-old...
Read More »Megger Donates $3,000 to Phoenix Children's Hospital Foundation
Annual golf outing honors 16 year old cancer survivorÃ- Norristown, Pa.Ã- – Megger, one of the world’s leading manufacturers and suppliers of test equipment and measuring instruments for electrical power applications, hosted its 12thÃ- annualÃ- MeggerÃ- Distributor Golf Event on Saturday, January 26. The event, which took place at the Lakes of Ahawatukee Golf Course in...
Read More »
Distribution Profilers evaluate loading.
Intended for power utilities, Series MDP provides information to evaluate loading on feeders/overhead lines and to identify needed upgrades. Customers can record currents up to 1,000 A, with additional 200 A over-range. All 3 models offer wide range of data retrieval options and virtually unlimited data recording. Software provides waveform capture and harmonic analysis up to 32nd order,...
Read More »
Insulation/Continuity Testers range from 10-1,000 V.
Conforming to IEC1010-2 for Category IV 600 V applications, Series MIT400 features dual digital and analog arc displays showing measurement result and actual test voltage being delivered simultaneously. For low voltage insulation testing, units offer user-selectable 10-100 V in 1 V increments. Insulation resistance measurements range from 20-200 GW, and continuity measurement of 200 mA is...
Read More »Insulation Testers measure voltage/current/capacitance.
Base model, MIT510, comes with 5 pre-programmed test voltages from 250-5,000 V and measures to 15 TW on digital scale. Adding to previous model's capabilities, MIT520 offers ability to step up voltage in 10 V increments from 50-1,000 V and 25 V increments beyond 1,000 V. It also includes pass/fail alarm, various tests, 32k data storage, and RS232 or USB downloading capabilities. Also available,...
Read More »Digital Multimeters suit general-purpose testing.
Offering range of measurement modes for ac and dc applications, resistance, and current measurements, Models AVO300 and AVO310 are fully autoranging for immediate testing. Voltage measurements up to 1,000 V are permitted without damage to instruments. Three ranges are provided for ac or dc current measurement from 0.1 Ã-µA to 10 A. Large, 3Ã-½-digit LCD display on Model AVO300 can be read...
Read More »Ground Testers are suited for ground rod testing.
Model DET3TD is digital 3-terminal instrument for grounding and bonding tests, and digital 4-terminal Model DET4TD adds resistivity measurement. Products are also available as analog, 3-terminal Model DET3TA and Model DET3TC, which adds current measuring function for ART (Attached Rod Technique) testing capabilities. Rated to IP54, all instruments include voltmeter, measure resistance from...
Read More »
Transformer Turns Ratio Set provides -
Suited for single- and 3-phase transformer testing, automatic Model TTR25 measures turns ratio of 20,000:1 in less than 5 seconds and locates problems in transformer windings and magnetic core circuits. Unit also measures excitation current as well as normal and reverse polarity of single-phase transformers. Battery-operated tester features single-button operation, quick-start guide on front...
Read More »
Digital Clamp Meter features dual function clamp.
MMC850 Multi-core ac digital clamp meter features design that eliminates need to split cable, remove panels or open outlet boxes to access single conductors. Planer magnetic sensor coils calculate current in flat or round multi-core cable to 100 A. Meter features backlit display, positive finger guard for comfortable grip, and inner jaw clamp to centralize cables. Unit suits electrical...
Read More »