Megger

MPQ1000 Power Quality Analyzer features on board data analysis.
Laboratory and Research Supplies and Equipment

MPQ1000 Power Quality Analyzer features on board data analysis.

Used for recording power, energy, RMS, sags, swells, THD, TDD, flicker, unbalance and rapid voltage change, harmonics, flicker and harmonic direction, MPQ1000 Power Analyzer records transients down to 1 microsecond. Featuring color VGA display, unit’s memory can be expanded by using SD card. Data transfer can be done using USB cable, USB stick, Ethernet options. Analyzer performs analysis to...

Read More »
DLRO10HDX Ohmmeters come with backlit LCD display.
Test & Measurement

DLRO10HDX Ohmmeters come with backlit LCD display.

Offering protection up to 600V without blowing fuse, DLRO10HDX Ohmmeters feature control panel for easy navigation for configuration settings. Operated in five test modes with auto start on connection, units delivers 10 A into measurements up to 250 mΩ and 1 A measurements up to 2.5 mΩ. Designed for stable operation with IP65 casing, DLRO10HDX is operated with rechargeable battery or AC power...

Read More »
Test & Measurement

Insulation and Continuity Testers come with IP54 protection rating.

Designed to access faster and minimize accidental damage to equipment under test, MIT480/2 series Insulation and Continuity Testers are used in telecommunications and cable testing fields. Product has 3 wire connection for A, B and E for complete testing without disconnecting. Features safety rating of CAT IV 600 V, user selectable test current of 20mA or 200mA, continuity testing of 0.01§Ù to...

Read More »
Li-Ion Powered Digital Ohmmeters test resistance with up to 100 A.
Test & Measurement

Li-Ion Powered Digital Ohmmeters test resistance with up to 100 A.

Featuring CAT IV 600 Vac/500 Vdc safety rating,Â- DLRO100 allows 0.1 Ã‚ÂµΩ to 1.999 Ω resistance measurement with 0.1 Ã‚ÂµΩ resolution in areas without access to power. Portable unit offers adjustable current ramping, intuitive interface, and 3 test modes. While all 4 models test currents from 10–110 A, mid-range model adds data storage and DualGround...

Read More »
Mining, Oil Drilling, Refining Products & Equipment

Dual Channel TDR locates faults on metallic cables.

Designed to locate faults on all metallic cables, including twisted pair wires and coax cables, TDR2010 Time Domain Reflectometer features 800 x 400 pixel, backlit WVGA color LCD with user-definable tones. IP54-rated unit offers velocity factor of 0.20–0.99 and 5 output impedances of 25, 50, 75, 100, and 125 Ω. TDR has minimum resolution of 0.1 m and max range of 20 km, depending on velocity...

Read More »
Test & Measurement

Digital Insulation Resistance Tester has multiple operating modes.

Offering 5 preset test voltages from 250–5,000 V, IP40-rated and battery-powered BM5200 provides user safety when testing in high voltage environments or working on 3-phase equipment. Fully automatic unit, rated to CAT III 600 V, includes high voltage warning indicator, external voltage display after IR test, and automatic discharge of reactive loads. Max resistance range of 1 teraohm, and...

Read More »
Test & Measurement

Insulation Resistance Tester features 15 kV rating.

Capable of measuring motors and generators above 34,500 V and equipment rated above 35 kV, Model MIT1525 offers 5% accuracy with max resistance up to 3 TΩ. Unit maintains CAT IV 1,000 V safety rating and is designed to charge while operating. RapidÂ- charge lithium-ion battery enables more than 60 minutes of testing on 30 minute charge. Double insulated and built into dual case design,...

Read More »
Electrical Equipment & Systems

Handheld Irradiance Meter aids in solar panel positioning.

With its internal solar detector and meter, PVM210 helps solar/PV engineers locate most appropriate site to place solar panels. Form factor allows unit to be held in one hand while working on sloping roof or atop ladder. Along with measurement range up to 1,999 W/mÂ-² for solar power readings, unit features 3¾-digit LCD, data hold feature, and accuracy within ±10 W/m²...

Read More »
Test & Measurement

Handheld TTR Tester promotes operational efficiency.

Powered by replaceable AA batteries, TTR20 battery-operated TTR (transformer turns ratio) tester measures turns ratio, polarity, and excitation current in single- and 3-phase transformers, current and potential transformers, as well as voltage regulators. This utility tool, featuring pushbutton operation, tests at 55 HzÂ- and offers better than 0.5% repeatability. Leads are available...

Read More »
Electrical Equipment & Systems

Proving Unit ensures safe 2-pole tester operation.

By providing in-field substitute voltage source, battery-operated MPU690Â- helps ensure that 2-pole voltage tester is capable of detecting voltage safely and efficiently. Portable device generates stepped voltages beginning at 690 V and slowly ramps down until device shuts off, indicating that 2-pole voltage tester can correctly indicate voltages at different levels. Facilitating operation,...

Read More »

All Topics