Megger

Laboratory and Research Supplies and Equipment

Handheld LAN Tester has effective distance of 3,275 ft.

Able to measure logical network performance and physical condition of network cables, NET200- helps network engineers install and maintain LANs with 10BASE-T/100BASE-TX based- Ethernet protocol. Unit uses round-trip time testing to measure network speed under dynamic and static configuration protocols as well as IP scanning to show information on all terminals connected into LAN. Tool also...

Read More »
Insulation/Continuity Testers range from 10-1,000 V.
Test & Measurement

Insulation/Continuity Testers range from 10-1,000 V.

Conforming to IEC1010-2 for Category IV 600 V applications, Series MIT400 features dual digital and analog arc displays showing measurement result and actual test voltage being delivered simultaneously. For low voltage insulation testing, units offer user-selectable 10-100 V in 1 V increments. Insulation resistance measurements range from 20-200 GW, and continuity measurement of 200 mA is...

Read More »
Test & Measurement

Insulation Testers measure voltage/current/capacitance.

Base model, MIT510, comes with 5 pre-programmed test voltages from 250-5,000 V and measures to 15 TW on digital scale. Adding to previous model's capabilities, MIT520 offers ability to step up voltage in 10 V increments from 50-1,000 V and 25 V increments beyond 1,000 V. It also includes pass/fail alarm, various tests, 32k data storage, and RS232 or USB downloading capabilities. Also available,...

Read More »
Test & Measurement

Digital Multimeters suit general-purpose testing.

Offering range of measurement modes for ac and dc applications, resistance, and current measurements, Models AVO300 and AVO310 are fully autoranging for immediate testing. Voltage measurements up to 1,000 V are permitted without damage to instruments. Three ranges are provided for ac or dc current measurement from 0.1 -µA to 10 A. Large, 3-½-digit LCD display on Model AVO300 can be read from...

Read More »
Test & Measurement

Ground Testers are suited for ground rod testing.

Model DET3TD is digital 3-terminal instrument for grounding and bonding tests, and digital 4-terminal Model DET4TD adds resistivity measurement. Products are also available as analog, 3-terminal Model DET3TA and Model DET3TC, which adds current measuring function for ART (Attached Rod Technique) testing capabilities. Rated to IP54, all instruments include voltmeter, measure resistance from...

Read More »
Transformer Turns Ratio Set provides
Test & Measurement

Transformer Turns Ratio Set provides

Suited for single- and 3-phase transformer testing, automatic Model TTR25 measures turns ratio of 20,000:1 in less than 5 seconds and locates problems in transformer windings and magnetic core circuits. Unit also measures excitation current as well as normal and reverse polarity of single-phase transformers. Battery-operated tester features single-button operation, quick-start guide on front...

Read More »
Digital Clamp Meter features dual function clamp.
Test & Measurement

Digital Clamp Meter features dual function clamp.

MMC850 Multi-core ac digital clamp meter features design that eliminates need to split cable, remove panels or open outlet boxes to access single conductors. Planer magnetic sensor coils calculate current in flat or round multi-core cable to 100 A. Meter features backlit display, positive finger guard for comfortable grip, and inner jaw clamp to centralize cables. Unit suits electrical...

Read More »
Software

Software manages electrical acceptance/maintenance testing.

PowerDB(TM) provides data management for electric utility, industrial, or electrical testing service company acceptance and maintenance testing jobs. Opening specific record shows information about job, such as type of service, order date, sales contact, and invoice information. Job information and test results can be transferred between field-use databases and master database. Other capabilities...

Read More »
Construction Equipment and Supplies

Interconnect adds high output capability to relay test set.

Interface Unit, Model MEIU allows MPRT relay test set to control either multi-amp Epoch II or Epoch 20 unit for specialized testing capability. User employing MPRT can operate Epoch II or 20 unit manually using TouchView Interface or automatically using AVTS software. When used with 3-channel MPRT, interconnect device allows user to manually control up to 3 Epoch II/20 units for applications such...

Read More »
Company News

Megger Raises $17,800 for Phoenix Children's Hospital Foundation

19th annual Megger Distributor Golf Outing also Supports HopeKids of Arizona and 4 Paws for Ability Norristown, Pa. February 2020 – Megger held its 19th annual Distributor Golf Outing on Saturday, January 25, raising $19,600. $17,800 was donated to Phoenix Children’s Hospital Foundation; $1,000 went to HopeKids of Arizona, an organization that provides ongoing events, activities and a...

Read More »
Company News

Megger Raises $14,765 for Phoenix Children's Hospital Foundation

18th annual Megger Distributor Golf Event pays tribute to 22-year-old cancer survivor Norristown, Pa. March 2019 – Megger held its 18th annual Distributor Golf Event on Saturday, January 26 and raised a total of $14,765 for Phoenix Children’s Hospital Foundation. The much anticipated event, held once again at Ahwatukee Country Club in Phoenix, Arizona, is organized in honor of 22-year-old...

Read More »
Laboratory and Research Supplies and Equipment

Handheld LAN Tester has effective distance of 3,275 ft.

Able to measure logical network performance and physical condition of network cables, NET200- helps network engineers install and maintain LANs with 10BASE-T/100BASE-TX based- Ethernet protocol. Unit uses round-trip time testing to measure network speed under dynamic and static configuration protocols as well as IP scanning to show information on all terminals connected into LAN. Tool also...

Read More »
Company News

Megger Donates $3,000 to Phoenix Children's Hospital Foundation

Annual golf outing honors 16 year old cancer survivor-  Norristown, Pa.- – Megger, one of the world’s leading manufacturers and suppliers of test equipment and measuring instruments for electrical power applications, hosted its 12th- annual- Megger- Distributor Golf Event on Saturday, January 26. The event, which took place at the Lakes of Ahawatukee Golf Course in Phoenix, Arizona, is...

Read More »
Insulation/Continuity Testers range from 10-1,000 V.
Test & Measurement

Insulation/Continuity Testers range from 10-1,000 V.

Conforming to IEC1010-2 for Category IV 600 V applications, Series MIT400 features dual digital and analog arc displays showing measurement result and actual test voltage being delivered simultaneously. For low voltage insulation testing, units offer user-selectable 10-100 V in 1 V increments. Insulation resistance measurements range from 20-200 GW, and continuity measurement of 200 mA is...

Read More »
Test & Measurement

Insulation Testers measure voltage/current/capacitance.

Base model, MIT510, comes with 5 pre-programmed test voltages from 250-5,000 V and measures to 15 TW on digital scale. Adding to previous model's capabilities, MIT520 offers ability to step up voltage in 10 V increments from 50-1,000 V and 25 V increments beyond 1,000 V. It also includes pass/fail alarm, various tests, 32k data storage, and RS232 or USB downloading capabilities. Also available,...

Read More »
Test & Measurement

Digital Multimeters suit general-purpose testing.

Offering range of measurement modes for ac and dc applications, resistance, and current measurements, Models AVO300 and AVO310 are fully autoranging for immediate testing. Voltage measurements up to 1,000 V are permitted without damage to instruments. Three ranges are provided for ac or dc current measurement from 0.1 -µA to 10 A. Large, 3-½-digit LCD display on Model AVO300 can be read from...

Read More »
Test & Measurement

Ground Testers are suited for ground rod testing.

Model DET3TD is digital 3-terminal instrument for grounding and bonding tests, and digital 4-terminal Model DET4TD adds resistivity measurement. Products are also available as analog, 3-terminal Model DET3TA and Model DET3TC, which adds current measuring function for ART (Attached Rod Technique) testing capabilities. Rated to IP54, all instruments include voltmeter, measure resistance from...

Read More »
Transformer Turns Ratio Set provides
Test & Measurement

Transformer Turns Ratio Set provides

Suited for single- and 3-phase transformer testing, automatic Model TTR25 measures turns ratio of 20,000:1 in less than 5 seconds and locates problems in transformer windings and magnetic core circuits. Unit also measures excitation current as well as normal and reverse polarity of single-phase transformers. Battery-operated tester features single-button operation, quick-start guide on front...

Read More »

All Topics