Metabo Corporation
West Chester, PA 19380
High-Torque Die Grinder includes spindle lock.
With speed range of 2,500–8,700 rpm, GE950 G Plus is suitable for polishing,- sanding, deburring, edge finishing, beveling, and cutting metal. Grinder features 8.5 A LongLife motor, 950 W of power, and 27 lb-in. of torque. Spindle lock enables accessory changes with single wrench, while hardened and ground -¼ in. collet ensures accurate balance and minimized run out of accessory. In addition,...
Read More »
Cordless Drill/Driver features attachment to increase torque.
Powered by Ultra-M 4.0 Ah battery, BS18 LTX Quick has dual range torque adjustment with max running torque of 372 lb-in. and up to 850 lb-in. for momentary spikes. Cordless tool offers no-load speed of 0–400 rpm in first gear and 0–1,400 rpm in second gear. When paired with Power X3 torque attachment, torque is tripled and speed is reduced to 0–133 rpm for maximum control and power. Quick...
Read More »Abrasive Cutting and Grinding Wheel offers maximum safety.
Suited for cutting, deburring, and light grinding, Combinator eliminates need to change abrasive wheels during cutting and grinding applications. Product measures 5/64 in. thick and features 3 layers of fiberglass to maximize safety and cutting speed, while abrasive/resin formulation optimizes strength and rigidity. Contaminant-free wheel cuts stainless steel, steel, alloy steels, hardened...
Read More »Lithium-Ion Batteries offer extended run time.
Used with variety of cordless power tools, Ultra-M 4.0 Ah Batteries do not have memory effect, and can be charged at user's convenience without having to wait for total discharge. Units feature air-cooled charging technology that cools battery pack to level temperature during charging using guided air flow ducting. To prevent damage and prolong battery life, Electronic Single Cell Protection...
Read More »Cordless Drill Press features permanent rare earth magnet.
With max drilling depth of 2 in., MAG 28 LTX is capable of 380 or 680 no load rpm and features dual-level, permanently lubricated gearbox. Rare earth magnet, without requiring any energy from tool's 25.2 V Li-Ion battery, offers up to 2,500 lb holding force that can be adjusted for precise positioning when drilling on vertical, horizontal, and sloped surfaces. Prism-shaped magnetic base lets...
Read More »Angle Grinders are designed for safety.
Suited for heavy-duty grinding and cutting applications, WEPBA14-125 Quick and WEPBA14-150 Quick stop wheel rotation in 2 seconds or less upon release of Deadman safety switch. Both models have 12.2 A motor and 1,400 W power rating. WEPBA14-125 Quick offers no-load speed of 10,000 rpm and max wheel diameter of 5 in., and respective values for WEPBA14-150 Quick are 9,000 rpm and 6 in. When tool is...
Read More »
Electronic Belt Sander handles pipe and tube fabrication.
Powered by 1,200 W, 10 A Marathon motor, Model RBE12-180 is suitable for burnishing, finishing, and reconditioning steel, stainless steel, non-ferrous pipe and tube. Tool features double gear reduction, exact sanding belt guidance, and 270-° max wrap angle as well as electronic soft start and Vario Tacho Constamatic electronic speed stabilization. For safety, sander includes overload protection,...
Read More »Concrete Surface Prep Kit combones power, ergonomics, airflow.
Suited for large area concrete surface grinding applications, 7 in. Angle Grinder Surface Prep Kit includes W24-230 large angle grinder as well as 7 in. dust control shroud and optional vacuum. Model W24-230, at 15 A, has rated speed of 6,600 rpm and loaded speed of 4,600 rpm and delivers 150 lb-in. of torque and 2,400 W of power. Made from virgin polyurethane, dust control shroud opens to let...
Read More »Large Angle Grinder is designed for safety, efficiency.
Used for cutting and grinding metal, Metabo Metal Masters series model W24-230 comes with 9 in. wheel guard and delivers 150 lb-in. torque. It has rated speed of 6,600 rpm and loaded speed of 4,600 rpm. Featuring 2,400 W of power, 15 A grinder incorporates Marathon motor as well as vibration-minimizing, 3-position side handle and 90-
Read More »Portable Electric Burnisher polishes stainless steel.
Accommodating abrasive wheels from 4-4.5 in. in diameter and 5/8-4 in. wide, Model SE12-115 is suited for grinding, polishing, sanding, and removing scratches and rust. Unit is equipped with 10 A motor providing 1,200 W of power, 98 lb-in. torque, and no-load speed of 900-2,800 rpm. In addition to Vario Tacho Constamatic electronic speed stabilization, tool incorporates dust-deflection winding...
Read More »
High-Torque Die Grinder includes spindle lock.
With speed range of 2,500–8,700 rpm, GE950 G Plus is suitable for polishing,- sanding, deburring, edge finishing, beveling, and cutting metal. Grinder features 8.5 A LongLife motor, 950 W of power, and 27 lb-in. of torque. Spindle lock enables accessory changes with single wrench, while hardened and ground -¼ in. collet ensures accurate balance and minimized run out of accessory. In addition,...
Read More »
Cordless Drill/Driver features attachment to increase torque.
Powered by Ultra-M 4.0 Ah battery, BS18 LTX Quick has dual range torque adjustment with max running torque of 372 lb-in. and up to 850 lb-in. for momentary spikes. Cordless tool offers no-load speed of 0–400 rpm in first gear and 0–1,400 rpm in second gear. When paired with Power X3 torque attachment, torque is tripled and speed is reduced to 0–133 rpm for maximum control and power. Quick...
Read More »Abrasive Cutting and Grinding Wheel offers maximum safety.
Suited for cutting, deburring, and light grinding, Combinator eliminates need to change abrasive wheels during cutting and grinding applications. Product measures 5/64 in. thick and features 3 layers of fiberglass to maximize safety and cutting speed, while abrasive/resin formulation optimizes strength and rigidity. Contaminant-free wheel cuts stainless steel, steel, alloy steels, hardened...
Read More »Lithium-Ion Batteries offer extended run time.
Used with variety of cordless power tools, Ultra-M 4.0 Ah Batteries do not have memory effect, and can be charged at user's convenience without having to wait for total discharge. Units feature air-cooled charging technology that cools battery pack to level temperature during charging using guided air flow ducting. To prevent damage and prolong battery life, Electronic Single Cell Protection...
Read More »Cordless Drill Press features permanent rare earth magnet.
With max drilling depth of 2 in., MAG 28 LTX is capable of 380 or 680 no load rpm and features dual-level, permanently lubricated gearbox. Rare earth magnet, without requiring any energy from tool's 25.2 V Li-Ion battery, offers up to 2,500 lb holding force that can be adjusted for precise positioning when drilling on vertical, horizontal, and sloped surfaces. Prism-shaped magnetic base lets...
Read More »Angle Grinders are designed for safety.
Suited for heavy-duty grinding and cutting applications, WEPBA14-125 Quick and WEPBA14-150 Quick stop wheel rotation in 2 seconds or less upon release of Deadman safety switch. Both models have 12.2 A motor and 1,400 W power rating. WEPBA14-125 Quick offers no-load speed of 10,000 rpm and max wheel diameter of 5 in., and respective values for WEPBA14-150 Quick are 9,000 rpm and 6 in. When tool is...
Read More »
Electronic Belt Sander handles pipe and tube fabrication.
Powered by 1,200 W, 10 A Marathon motor, Model RBE12-180 is suitable for burnishing, finishing, and reconditioning steel, stainless steel, non-ferrous pipe and tube. Tool features double gear reduction, exact sanding belt guidance, and 270-° max wrap angle as well as electronic soft start and Vario Tacho Constamatic electronic speed stabilization. For safety, sander includes overload protection,...
Read More »Concrete Surface Prep Kit combones power, ergonomics, airflow.
Suited for large area concrete surface grinding applications, 7 in. Angle Grinder Surface Prep Kit includes W24-230 large angle grinder as well as 7 in. dust control shroud and optional vacuum. Model W24-230, at 15 A, has rated speed of 6,600 rpm and loaded speed of 4,600 rpm and delivers 150 lb-in. of torque and 2,400 W of power. Made from virgin polyurethane, dust control shroud opens to let...
Read More »Large Angle Grinder is designed for safety, efficiency.
Used for cutting and grinding metal, Metabo Metal Masters series model W24-230 comes with 9 in. wheel guard and delivers 150 lb-in. torque. It has rated speed of 6,600 rpm and loaded speed of 4,600 rpm. Featuring 2,400 W of power, 15 A grinder incorporates Marathon motor as well as vibration-minimizing, 3-position side handle and 90-
Read More »Portable Electric Burnisher polishes stainless steel.
Accommodating abrasive wheels from 4-4.5 in. in diameter and 5/8-4 in. wide, Model SE12-115 is suited for grinding, polishing, sanding, and removing scratches and rust. Unit is equipped with 10 A motor providing 1,200 W of power, 98 lb-in. torque, and no-load speed of 900-2,800 rpm. In addition to Vario Tacho Constamatic electronic speed stabilization, tool incorporates dust-deflection winding...
Read More »