Phoenix Contact

Managed Ethernet Switches support DLR redundancy mechanism.
Communication Systems & Equipment

Managed Ethernet Switches support DLR redundancy mechanism.

Supporting Common Industrial Protocol for use in EtherNet/IP networks, Series 7000 features recovery times of less than 3 ms, enabling switch-over to be performed quickly in event of failure. Switches support Device Level Ring redundancy mechanism and enable up to 6 non-DLR-capable devices to be integrated into ring. Functions such as IGMP snooping, multicast source detection, and auto-query port...

Read More »
Managed Ethernet Switches support DLR redundancy mechanism.
Communication Systems & Equipment

Managed Ethernet Switches support DLR redundancy mechanism.

Supporting Common Industrial Protocol for use in EtherNet/IP networks, Series 7000 features recovery times of less than 3 ms, enabling switch-over to be performed quickly in event of failure. Switches support Device Level Ring redundancy mechanism and enable up to 6 non-DLR-capable devices to be integrated into ring. Functions such as IGMP snooping, multicast source detection, and auto-query port...

Read More »
Miniature Latching Connectors suit LED applications.
Construction Equipment and Supplies

Miniature Latching Connectors suit LED applications.

Available with secure latching mechanism, PTSM Connectors can be locked together in lighting and other space-critical applications. Locking feature, which does not require any special tools, is compatible with existing PTSM headers, enabling connectors to be combined in multiple ways, such as wire-to-board, board-to-board, wire-to-wire, and through-board. Measuring 5 mm high with 2.5 mm pitch,...

Read More »
Miniature Latching Connectors suit LED applications.
Construction Equipment and Supplies

Miniature Latching Connectors suit LED applications.

Available with secure latching mechanism, PTSM Connectors can be locked together in lighting and other space-critical applications. Locking feature, which does not require any special tools, is compatible with existing PTSM headers, enabling connectors to be combined in multiple ways, such as wire-to-board, board-to-board, wire-to-wire, and through-board. Measuring 5 mm high with 2.5 mm pitch,...

Read More »
Power Distribution Boxes eliminate voltage drop in field.
Architectural & Civil Engineering Products

Power Distribution Boxes eliminate voltage drop in field.

Designed for field-based power supply voltages of 24 V, M12 Power Distribution Boxes, in combination with standard M12 power cables of 4x10 AWG conductors, can eliminate voltage drop that occurs across long cable runs. Distributor has four T-coded M12 receptacles with current load up to 10 A/channel. Each of 8 channels is equipped with plug-in fuse, and LEDs indicate status of input and output...

Read More »
Power Distribution Boxes eliminate voltage drop in field.
Architectural & Civil Engineering Products

Power Distribution Boxes eliminate voltage drop in field.

Designed for field-based power supply voltages of 24 V, M12 Power Distribution Boxes, in combination with standard M12 power cables of 4x10 AWG conductors, can eliminate voltage drop that occurs across long cable runs. Distributor has four T-coded M12 receptacles with current load up to 10 A/channel. Each of 8 channels is equipped with plug-in fuse, and LEDs indicate status of input and output...

Read More »
Analog Signal Conversion Transducers install in tight areas.
Controls & Controllers

Analog Signal Conversion Transducers install in tight areas.

As universally configurable limit-value switch with PDT relay output, MINI PRO set-point relay module has plug-in connection technology. Analog input switching range is adjustable from 0–24 mA and 0–12 V, and form C relay on output side is rated to 250 V AC/DC up to 6 A. Offering- adjustable input values from 0–24 mA and 0–12 V, MINI PRO analog-to-frequency transducer supports frequency...

Read More »
Analog Signal Conversion Transducers install in tight areas.
Controls & Controllers

Analog Signal Conversion Transducers install in tight areas.

As universally configurable limit-value switch with PDT relay output, MINI PRO set-point relay module has plug-in connection technology. Analog input switching range is adjustable from 0–24 mA and 0–12 V, and form C relay on output side is rated to 250 V AC/DC up to 6 A. OfferingÂ- adjustable input values from 0–24 mA and 0–12 V, MINI PRO analog-to-frequency transducer supports...

Read More »
SIL 3-Rated Safety Relays measure as thin as 6 mm.
Electrical Equipment & Systems

SIL 3-Rated Safety Relays measure as thin as 6 mm.

Available in 6 mm (slim) and 12 mm (compact) form factors, PSRmini allows for 6 A, force-guided safety connections. Slim variants have- 1 or 2 NO safety-rated contacts, while compact variants have up to 3. All products switch loads up to 6 A and are compatible with various signaling devices, such as emergency stop equipment, safety-door switches, and light grids. Approvals make these relays...

Read More »
SIL 3-Rated Safety Relays measure as thin as 6 mm.
Electrical Equipment & Systems

SIL 3-Rated Safety Relays measure as thin as 6 mm.

Available in 6 mm (slim) and 12 mm (compact) form factors, PSRmini allows for 6 A, force-guided safety connections. Slim variants haveÂ- 1 or 2 NO safety-rated contacts, while compact variants have up to 3. All products switch loads up to 6 A and are compatible with various signaling devices, such as emergency stop equipment, safety-door switches, and light grids. Approvals make these...

Read More »

All Topics