F & L Fluid Components
Camp Hill, PA 17011
Share:
FCI Flow Switch Embarks on Out of This World Mission for Spacesuit Experiment aboard International Space Station
San Marcos, CA—March 10, 2021—In support of NASA’s development of next-generation spacesuit technologies, the reliable, precision Model AS-FS Flow Switch from FCI Aerospace has been inserted into the Spacesuit Water Membrane Evaporator (SWME) -- Spacesuit Evaporation Rejection Flight Experiment (SERFE), which was installed last November aboard the International Space Station (ISS). SWME...
Read More »
Compact ST75 Thermal Mass Flow Meter Measures Natural Gas, CO2 and Waste Gases in Breweries
Flow Data for Heating, Balancing, Kegging, Bottling and More San Marcos, CA—January 28, 2021—The versatile, green-friendly ST75 Air/Gas Flow Meter from Fluid Components International (FCI) accurately and reliably measures natural gas, carbon dioxide (CO2), and mixed waste gases in small line sizes to optimize brewing fermentation processes, product quality and overall plant...
Read More »
Latest Thermal Flow Meter Comes with Wet Gas MASSter Technology
Features accuracy of ±1% of reading, ±0.5% of full scale and repeatability of ±0.5% of reading. Can measure flow rates as low as 0.25 SFPS [0.07 NMPS] and provide 100:1 turndown. Provides measurement in pipe diameters from 1 to 99 in. (25 to 2500 mm.) and in temperatures up to 850°F (454°C).
Read More »
New Thermal Mass Flow Meter with Backlighted Informational LCD Display
ST80 series with AST measures in CT mode when measuring in low flow ranges and start-up conditions. Suitable for pipe diameters from 1 to 99 inches and air/gas temperatures up to 850°F. Transmitter enclosure is NEMA 4X/IP67 rated, with NPT or metric conduit ports.
Read More »
Thermal Flow Meters Optimize Waste-To-Energy Plant Boiler Intake Air Flow and Flue Gas Measurement
High Accuracy and Repeatability Under Demanding Operating Conditions San Marcos, CA—June 30, 2020—Engineers challenged with designing or operating waste-to-energy incineration plants will find the ST80, ST100 and MT100 Thermal Mass Flow Meters from Fluid Components International (FCI) offer them accuracy, repeatability, ease of installation and low maintenance to enhance plant performance...
Read More »
High Accuracy FCI Air/Gas Mass Flow Meters Enhance Thermal Oxidizer Performance
Enhancing Effectiveness of Pollution Control & Monitoring Systems That Remove Greenhouse Waste, Flue and Tail Gases San Marcos, CA—May 27, 2020—Engineers responsible for designing, installing and operating thermal oxidizer systems to remove harmful hazardous air pollutants (HAPs) and volatile organic chemicals (VOCs) will find the ST100 Series and MT100 Series Thermal Flow Meters from Fluid...
Read More »
New Wet Gas MASSter Sensor from FCI is Ideal for ST80 Series Flow Meters
Delivers accurate, repeatable gas flow measurement in the presence of even more moisture and condensation droplets. Feature accuracy of ±1% of reading, ±0.5% of full scale and repeatability of ±0.5% of reading with flow rates up to 1000 SFPS (305 NMPS) and 100:1 turndown. Suitable for pipe diameters from 1 to 99 inches (25 to 2500 mm) and air/gas temperatures up to 850°F (454°C).
Read More »
New Flow Switch and Monitor Utilizes Thermal Dispersion Flow Measurement Technology
Designed for gas and liquid process analyzer sampling systems. Accommodates wide turndowns with a ratio up to 100:1. Ideal for use with process and emissions sampling systems, including gas chromatographs, mass spectrometers, optical spectrometers and photometers.
Read More »
FCI Flow Switch Embarks on Out of This World Mission for Spacesuit Experiment aboard International Space Station
San Marcos, CA—March 10, 2021—In support of NASA’s development of next-generation spacesuit technologies, the reliable, precision Model AS-FS Flow Switch from FCI Aerospace has been inserted into the Spacesuit Water Membrane Evaporator (SWME) -- Spacesuit Evaporation Rejection Flight Experiment (SERFE), which was installed last November aboard the International Space Station (ISS). SWME...
Read More »
Compact ST75 Thermal Mass Flow Meter Measures Natural Gas, CO2 and Waste Gases in Breweries
Flow Data for Heating, Balancing, Kegging, Bottling and More San Marcos, CA—January 28, 2021—The versatile, green-friendly ST75 Air/Gas Flow Meter from Fluid Components International (FCI) accurately and reliably measures natural gas, carbon dioxide (CO2), and mixed waste gases in small line sizes to optimize brewing fermentation processes, product quality and overall plant...
Read More »
Latest Thermal Flow Meter Comes with Wet Gas MASSter Technology
Features accuracy of ±1% of reading, ±0.5% of full scale and repeatability of ±0.5% of reading. Can measure flow rates as low as 0.25 SFPS [0.07 NMPS] and provide 100:1 turndown. Provides measurement in pipe diameters from 1 to 99 in. (25 to 2500 mm.) and in temperatures up to 850°F (454°C).
Read More »
New Thermal Mass Flow Meter with Backlighted Informational LCD Display
ST80 series with AST measures in CT mode when measuring in low flow ranges and start-up conditions. Suitable for pipe diameters from 1 to 99 inches and air/gas temperatures up to 850°F. Transmitter enclosure is NEMA 4X/IP67 rated, with NPT or metric conduit ports.
Read More »
Thermal Flow Meters Optimize Waste-To-Energy Plant Boiler Intake Air Flow and Flue Gas Measurement
High Accuracy and Repeatability Under Demanding Operating Conditions San Marcos, CA—June 30, 2020—Engineers challenged with designing or operating waste-to-energy incineration plants will find the ST80, ST100 and MT100 Thermal Mass Flow Meters from Fluid Components International (FCI) offer them accuracy, repeatability, ease of installation and low maintenance to enhance plant performance...
Read More »
High Accuracy FCI Air/Gas Mass Flow Meters Enhance Thermal Oxidizer Performance
Enhancing Effectiveness of Pollution Control & Monitoring Systems That Remove Greenhouse Waste, Flue and Tail Gases San Marcos, CA—May 27, 2020—Engineers responsible for designing, installing and operating thermal oxidizer systems to remove harmful hazardous air pollutants (HAPs) and volatile organic chemicals (VOCs) will find the ST100 Series and MT100 Series Thermal Flow Meters from Fluid...
Read More »
New Wet Gas MASSter Sensor from FCI is Ideal for ST80 Series Flow Meters
Delivers accurate, repeatable gas flow measurement in the presence of even more moisture and condensation droplets. Feature accuracy of ±1% of reading, ±0.5% of full scale and repeatability of ±0.5% of reading with flow rates up to 1000 SFPS (305 NMPS) and 100:1 turndown. Suitable for pipe diameters from 1 to 99 inches (25 to 2500 mm) and air/gas temperatures up to 850°F (454°C).
Read More »
New Flow Switch and Monitor Utilizes Thermal Dispersion Flow Measurement Technology
Designed for gas and liquid process analyzer sampling systems. Accommodates wide turndowns with a ratio up to 100:1. Ideal for use with process and emissions sampling systems, including gas chromatographs, mass spectrometers, optical spectrometers and photometers.
Read More »