Det-Tronics
Minneapolis, MN 55438
Share:
Toxic Gas Detection System provides stand-alone control.
DMC Series gas and flame controller is available in 4 versions for continuous indication and alarm control of 4, 12, 24, or 36 channels. Each channel has selectable high and low level alarm setpoint, and all alarm or fault events are time and date-stamped. Supporting up to 4 I/O modules in one singular I/O module design, product accepts 4-20 mA inputs and can monitor contact input devices....
Read More »Gas Detection System has 60 m open sensing path.
Eclipse OPECL delivers infrared combustible gas detection with response times of under 3 sec to 90% of FS. It features stainless steel construction, redundant dual xenon flashlamp technology, and multiple communication protocols. System detects flammable hydrocarbon gases and vapors; selectable gas settings include methane, ethane, ethylene, propane, butane, and propylene. RS-485 Modbus...
Read More »Gas Monitor operates in oxygen depleted environments.
PIRVOL point-infrared volumetric combustible gas monitor measures in range of 0 to 100% by volume. It is suitable for oil and gas wellhead mud-logging, hydrocarbon processing, and extractive sampling applications. Instrument is CSA-approved for Class 1, Div 1 groups B, C & D, and Div 2 groups A, B, C and D (T3C) hazardous areas, and conforms to EN50081-1 and EN50082-1 standards. Self-monitoring...
Read More »Flame Detector employs built-in optical testing.
X3301 triple infrared optical flame detectors automatically provide high-speed identification of all possible fault conditions and potential failure modes. Detector evaluates calibrated optical test parameters and compares value to detection range. Self-testing device evaluates actual flame detection performance of entire detector, including testing each sensor once per min, without need for...
Read More »Gas Detector is diffusion-based.
PointWatch Eclipse point infrared combustible gas detector continuously monitors hydrocarbon gases in 0 to 100% lower explosive limit range. Standard outputs include isolated 4-20 mA signal with HART(TM) and RS-485 serial communication. Heated sapphire optics have removed weather shielding to speed inspection. Unit includes integral wiring termination box plus tri-color LEDs for normal, alarm,...
Read More »Toxic Gas Detection System provides stand-alone control.
DMC Series gas and flame controller is available in 4 versions for continuous indication and alarm control of 4, 12, 24, or 36 channels. Each channel has selectable high and low level alarm setpoint, and all alarm or fault events are time and date-stamped. Supporting up to 4 I/O modules in one singular I/O module design, product accepts 4-20 mA inputs and can monitor contact input devices....
Read More »Gas Detection System has 60 m open sensing path.
Eclipse OPECL delivers infrared combustible gas detection with response times of under 3 sec to 90% of FS. It features stainless steel construction, redundant dual xenon flashlamp technology, and multiple communication protocols. System detects flammable hydrocarbon gases and vapors; selectable gas settings include methane, ethane, ethylene, propane, butane, and propylene. RS-485 Modbus...
Read More »Gas Monitor operates in oxygen depleted environments.
PIRVOL point-infrared volumetric combustible gas monitor measures in range of 0 to 100% by volume. It is suitable for oil and gas wellhead mud-logging, hydrocarbon processing, and extractive sampling applications. Instrument is CSA-approved for Class 1, Div 1 groups B, C & D, and Div 2 groups A, B, C and D (T3C) hazardous areas, and conforms to EN50081-1 and EN50082-1 standards. Self-monitoring...
Read More »Flame Detector employs built-in optical testing.
X3301 triple infrared optical flame detectors automatically provide high-speed identification of all possible fault conditions and potential failure modes. Detector evaluates calibrated optical test parameters and compares value to detection range. Self-testing device evaluates actual flame detection performance of entire detector, including testing each sensor once per min, without need for...
Read More »Gas Detector is diffusion-based.
PointWatch Eclipse point infrared combustible gas detector continuously monitors hydrocarbon gases in 0 to 100% lower explosive limit range. Standard outputs include isolated 4-20 mA signal with HART(TM) and RS-485 serial communication. Heated sapphire optics have removed weather shielding to speed inspection. Unit includes integral wiring termination box plus tri-color LEDs for normal, alarm,...
Read More »