J-Works, Inc

RSB5152 USB 2 Channel 5Amp SPDT Relay Module
Controls & Controllers

RSB5152 USB 2 Channel 5Amp SPDT Relay Module

J-Works. Inc has start shipping RSB5152 series of single pole, double throw (SPDT) 2 channel 5 Amp relay modules controlled over the USB. The SPDT relay outputs provide host USB control between common line and normally open or closed relay contacts using on-board screw type terminals. The relays are rated at 5A @ 250VAC, 24VDC. According to Paul Ryan, Applications Engr at J-Works This small form...

Read More »
SPDT Form C Relay Modules are controlled via USB.
Electrical Equipment & Systems

SPDT Form C Relay Modules are controlled via USB.

Rated 10 A at 277 Vac/28 Vdc with contact resistance of 250 mW, JSB2851 Series features SPDT relay outputs that provide host control between common line and normally open and closed connection points. Wire connection to relays is made via on-board screw type terminals. User can communicate with modules from any programming or test language that supports USB communications. Modules replace...

Read More »
USB Relay Module uses LEDs to indicate state.
Electrical Equipment & Systems

USB Relay Module uses LEDs to indicate state.

Providing USB control of 2 A SPDT form C relays, Model JSB212 can replace internal PC-based plug-in cards in test, control, monitor, and measurement applications. SPDT relay outputs provide host control between common line and NO/NC connection points. There are 3 options for indicators of state on each relay. Option 1 has LED for each relay that is on when relay is closed, while Option 2 has...

Read More »
USB 2.0 Internal Watch Dog Timer reduces possible damage from lockups.
Computer Hardware & Peripherals

USB 2.0 Internal Watch Dog Timer reduces possible damage from lockups.

Model WDT205 module plugs into internal USB port that meets Intel Front Panel I/O Connectivity Design Guide for USB port. If communication does not occur between unit and host computer or application within programmed time frame, it triggers relay to close for set amount of time. Relay event can be used to trigger warning device, turn off critical hardware, or perform system reset. Windows driver...

Read More »
Multifunction Counter Module has USB-powered design.
Computer Hardware & Peripherals

Multifunction Counter Module has USB-powered design.

Available with on board terminal block (screw type) connections or Molex KK series 2 pc pluggable connectors, USB 2.0-controlled JSB542 series DAQ module provides 4 channels of 24-bit counters. Each can be configured as 1 of 5 types of counters: Frequency, Period, Time between pulses, Quadrature, and Event. While Period and time counters have selectable time base of 1-100 MHz, frequency counter...

Read More »
SPDT Relays come with optional digital and/or ADC inputs.
Electrical Equipment & Systems

SPDT Relays come with optional digital and/or ADC inputs.

Rated at 8 A at 240 Vac and 8 A at 30 Vdc, Model MCSB2101 USB controlled high current relays can have 2 optional IO configurations. Configuration options available are: 8 bit Digital IO, 8 bit Darlington output drivers, 8 bit differential input or output, or 4 channels of ADC input. Digital IO is 3.3 V (LVTTL) and is 5 V tolerant, while differential IO can support either 0-5 V or -15 to 15 V...

Read More »
USB Multi Function Relay, ADC, & Opto-In Module Model JSB-380
Controls & Controllers

USB Multi Function Relay, ADC, & Opto-In Module Model JSB-380

GRANADA HILLS, CALIFORNIA, March 27, 2009, J-Works has start shipping model JSB-380 USB 2.0 Controlled Multi-Function module with 4 Relays, 4 ADC channels and 4 Digital Opto-Isolated inputs. Each Analog to Digital Converter (ADC) can measure -5V to +5V with optional 12 or 16 bit resolution, single ended or differential inputs, user controlled PGA in 1, 2, 4, 8 steps. The opto-isolated inputs can...

Read More »
Controls & Controllers

USB AC Monitor Model JSB-370

GRANADA HILLS, CALIFORNIA, March 19, 2007, J-Works has started shipping model JSB-370 which monitors an AC line and reports the on/off status of the line over the standard USB (Universal Serial Bus). The user may select that an on-board relay turns on and off based on the status of the AC line. The user communicates with the module from any programming or test language that supports USB...

Read More »
I/O Module features optical and relay isolation.
Controls & Controllers

I/O Module features optical and relay isolation.

Model JSB-340 provides four 2 A form C relays and 4 opto-isolated inputs that plug and play into standard USB. Inputs provide up to 2,500 V electrical isolation and selectable input range of 0-15 or 0-30 V. User can control relays and sample input from any programming or test language that supports USB communications. Optical and relay isolation eliminates surges from effecting host PC in test,...

Read More »
RSB5152 USB 2 Channel 5Amp SPDT Relay Module
Controls & Controllers

RSB5152 USB 2 Channel 5Amp SPDT Relay Module

J-Works. Inc has start shipping RSB5152 series of single pole, double throw (SPDT) 2 channel 5 Amp relay modules controlled over the USB. The SPDT relay outputs provide host USB control between common line and normally open or closed relay contacts using on-board screw type terminals. The relays are rated at 5A @ 250VAC, 24VDC. According to Paul Ryan, Applications Engr at J-Works This small form...

Read More »
SPDT Form C Relay Modules are controlled via USB.
Electrical Equipment & Systems

SPDT Form C Relay Modules are controlled via USB.

Rated 10 A at 277 Vac/28 Vdc with contact resistance of 250 mW, JSB2851 Series features SPDT relay outputs that provide host control between common line and normally open and closed connection points. Wire connection to relays is made via on-board screw type terminals. User can communicate with modules from any programming or test language that supports USB communications. Modules replace...

Read More »
USB Relay Module uses LEDs to indicate state.
Electrical Equipment & Systems

USB Relay Module uses LEDs to indicate state.

Providing USB control of 2 A SPDT form C relays, Model JSB212 can replace internal PC-based plug-in cards in test, control, monitor, and measurement applications. SPDT relay outputs provide host control between common line and NO/NC connection points. There are 3 options for indicators of state on each relay. Option 1 has LED for each relay that is on when relay is closed, while Option 2 has...

Read More »
USB 2.0 Internal Watch Dog Timer reduces possible damage from lockups.
Computer Hardware & Peripherals

USB 2.0 Internal Watch Dog Timer reduces possible damage from lockups.

Model WDT205 module plugs into internal USB port that meets Intel Front Panel I/O Connectivity Design Guide for USB port. If communication does not occur between unit and host computer or application within programmed time frame, it triggers relay to close for set amount of time. Relay event can be used to trigger warning device, turn off critical hardware, or perform system reset. Windows driver...

Read More »
Multifunction Counter Module has USB-powered design.
Computer Hardware & Peripherals

Multifunction Counter Module has USB-powered design.

Available with on board terminal block (screw type) connections or Molex KK series 2 pc pluggable connectors, USB 2.0-controlled JSB542 series DAQ module provides 4 channels of 24-bit counters. Each can be configured as 1 of 5 types of counters: Frequency, Period, Time between pulses, Quadrature, and Event. While Period and time counters have selectable time base of 1-100 MHz, frequency counter...

Read More »
SPDT Relays come with optional digital and/or ADC inputs.
Electrical Equipment & Systems

SPDT Relays come with optional digital and/or ADC inputs.

Rated at 8 A at 240 Vac and 8 A at 30 Vdc, Model MCSB2101 USB controlled high current relays can have 2 optional IO configurations. Configuration options available are: 8 bit Digital IO, 8 bit Darlington output drivers, 8 bit differential input or output, or 4 channels of ADC input. Digital IO is 3.3 V (LVTTL) and is 5 V tolerant, while differential IO can support either 0-5 V or -15 to 15 V...

Read More »
USB Multi Function Relay, ADC, & Opto-In Module Model JSB-380
Controls & Controllers

USB Multi Function Relay, ADC, & Opto-In Module Model JSB-380

GRANADA HILLS, CALIFORNIA, March 27, 2009, J-Works has start shipping model JSB-380 USB 2.0 Controlled Multi-Function module with 4 Relays, 4 ADC channels and 4 Digital Opto-Isolated inputs. Each Analog to Digital Converter (ADC) can measure -5V to +5V with optional 12 or 16 bit resolution, single ended or differential inputs, user controlled PGA in 1, 2, 4, 8 steps. The opto-isolated inputs can...

Read More »
Controls & Controllers

USB AC Monitor Model JSB-370

GRANADA HILLS, CALIFORNIA, March 19, 2007, J-Works has started shipping model JSB-370 which monitors an AC line and reports the on/off status of the line over the standard USB (Universal Serial Bus). The user may select that an on-board relay turns on and off based on the status of the AC line. The user communicates with the module from any programming or test language that supports USB...

Read More »
I/O Module features optical and relay isolation.
Controls & Controllers

I/O Module features optical and relay isolation.

Model JSB-340 provides four 2 A form C relays and 4 opto-isolated inputs that plug and play into standard USB. Inputs provide up to 2,500 V electrical isolation and selectable input range of 0-15 or 0-30 V. User can control relays and sample input from any programming or test language that supports USB communications. Optical and relay isolation eliminates surges from effecting host PC in test,...

Read More »

All Topics