Nippon Pulse America, Inc.
Radford, VA 24141
Motion Control Chips offer direct upgrade paths.
Series PCD46x1A features single-axis (PCD4611A), dual-axis (PCD4621A), and quad-axis (PCD4641A) models. With respective QFPs of 48, 64, and 100 pins, chip package and terminal allocation of all three modelsÃ- are compatible with those of PCD46x1 series. Series PCD46x1A can also mount on same boards as previous chips. Functionality lets CPU connect to chips with 8-bit parallel bus connection...
Read More »
Linear Servomotor features 50 mm long forcer.
Model L250SS Linear Shaft Motor has non-critical air gap up to 5 mm, which allows for flexible machining and installation. This also allows flexibility over length of stroke and is beneficial in applications that may cause build-up on shaft. Stroke lengths of 100-3,750 mm are available and unit is offered with continuous forces of up to 24 N and peak force of up to 94 N. Able to achieve...
Read More »
Linear Shaft Motor achieves sub micron resolution.
Designed for ultra high-precision market, Linear Shaft Motor features ironless construction and cylindrical design that uses 100% of magnetic flux. All available magnetic flux cuts coils at 90Ã-
Read More »
Linear Stepper Motor simplifies linear motion system design.
Model PFL35T LINEARSTEPÃ-® tin-can type linear actuator offers direct linear motion without need for any mechanical transformers. Product has 35 mm OD and is available with 0.48, 0.96, and 1.2 mm lead screw pitches. In addition to neodymium magnets, features offered include bipolar and unipolar windings, up to 39.5 N force rating, rated voltages of 5 and 12 V, and 48 steps per revolution....
Read More »
Single-Axis Linear Stage targets space-constrained applications.
SLP Acculine series incorporates linear shaft motor into all-inclusive stage to facilitate transition from traditional linear motion systems, including ball-screws, belt and chain drives, and pneumatic actuators. Intended for applications with limited space low-profile product integrates shaft support within housing and is engineered to have minimized dead zone. Offering sub micron resolution,...
Read More »
Linear Shaft Motor achieves sub-micron motion profiles.
Featuring cylindrical design, Linear Shaft Motor is able to use 100% of magnetic flux, which cuts coils at 90Ã-
Read More »
Gearhead Stepper Motor delivers high torque from small package.
Intended for space-restricted projects in medical device industry, PF25G is offered with unipolar or bipolar winding and 24 or 48 steps/revolution. Depending on winding and step number, motor has rated voltage of 5 or 12 V, resistance from 15-122 ohms, and holding torque from 8-12 mN-m. Other features include max torque vales from 20-100 mN-m, starting pulse rate of 490 or 790 pps, and motor...
Read More »
Nippon Pulse Motion Checker Controller Eases Prototyping
The Nippon Pulse Motion Checkers are palm-sized controllers that contain an integrated driver circuit and are designed to offer engineers an easy and affordable option to drive and control two-phase stepper motors during the prototyping and analysis phase. There are four Motion Checker options, depending how complicated prototyping is: The Motion Checker 1 is designed to make a stepper motor spin...
Read More »Nippon Pulse to Showcase Products at ATX South
Motion Control Specialist in Booth 2122, Will Showcase Linear and Stepper Motors RADFORD, VA -- For the first time, Nippon Pulse, a leader in the motion control industry, will be exhibiting its products at ATX South, the top automation showcase tradeshow in the South/Southeast Region. This year's show will be held at the Charlotte Convention Center from April 28-29, 2010. In its inaugural...
Read More »Nippon Pulse acquires Arcus Performax motion controller product line
Nippon Pulse America, Inc. (NPA) is thrilled to offer our customers even more quality motion control products with the acquisition of Arcus Technology’s Performax (PMX) motion controllers. This new box controller product line will allow NPA to better serve customers who prefer a more “turnkey” controller solution, or who choose to integrate PMX controllers into applications alongside other...
Read More »Nippon Pulse Certified to ISO 2015 Standards for Quality and Environmental Management
RADFORD, Va. – Nippon Pulse America Inc. (NPA) has recently received upgraded international standards certificates for its combined Quality Management and Environmental Management systems. NPA’s Business Management System (BMS) encompasses both the quality and environmental policies, and complies with all requirements for re-certification at the ISO 9001:2015 and 14001:2015 level. BSI America...
Read More »
Motion Control Chips offer direct upgrade paths.
Series PCD46x1A features single-axis (PCD4611A), dual-axis (PCD4621A), and quad-axis (PCD4641A) models. With respective QFPs of 48, 64, and 100 pins, chip package and terminal allocation of all three modelsÃ- are compatible with those of PCD46x1 series. Series PCD46x1A can also mount on same boards as previous chips. Functionality lets CPU connect to chips with 8-bit parallel bus connection...
Read More »
Linear Servomotor features 50 mm long forcer.
Model L250SS Linear Shaft Motor has non-critical air gap up to 5 mm, which allows for flexible machining and installation. This also allows flexibility over length of stroke and is beneficial in applications that may cause build-up on shaft. Stroke lengths of 100-3,750 mm are available and unit is offered with continuous forces of up to 24 N and peak force of up to 94 N. Able to achieve...
Read More »
Linear Shaft Motor achieves sub micron resolution.
Designed for ultra high-precision market, Linear Shaft Motor features ironless construction and cylindrical design that uses 100% of magnetic flux. All available magnetic flux cuts coils at 90Ã-
Read More »
Linear Stepper Motor simplifies linear motion system design.
Model PFL35T LINEARSTEPÃ-® tin-can type linear actuator offers direct linear motion without need for any mechanical transformers. Product has 35 mm OD and is available with 0.48, 0.96, and 1.2 mm lead screw pitches. In addition to neodymium magnets, features offered include bipolar and unipolar windings, up to 39.5 N force rating, rated voltages of 5 and 12 V, and 48 steps per revolution....
Read More »
Single-Axis Linear Stage targets space-constrained applications.
SLP Acculine series incorporates linear shaft motor into all-inclusive stage to facilitate transition from traditional linear motion systems, including ball-screws, belt and chain drives, and pneumatic actuators. Intended for applications with limited space low-profile product integrates shaft support within housing and is engineered to have minimized dead zone. Offering sub micron resolution,...
Read More »
Linear Shaft Motor achieves sub-micron motion profiles.
Featuring cylindrical design, Linear Shaft Motor is able to use 100% of magnetic flux, which cuts coils at 90Ã-
Read More »
Gearhead Stepper Motor delivers high torque from small package.
Intended for space-restricted projects in medical device industry, PF25G is offered with unipolar or bipolar winding and 24 or 48 steps/revolution. Depending on winding and step number, motor has rated voltage of 5 or 12 V, resistance from 15-122 ohms, and holding torque from 8-12 mN-m. Other features include max torque vales from 20-100 mN-m, starting pulse rate of 490 or 790 pps, and motor...
Read More »
Nippon Pulse Motion Checker Controller Eases Prototyping
The Nippon Pulse Motion Checkers are palm-sized controllers that contain an integrated driver circuit and are designed to offer engineers an easy and affordable option to drive and control two-phase stepper motors during the prototyping and analysis phase. There are four Motion Checker options, depending how complicated prototyping is: The Motion Checker 1 is designed to make a stepper motor spin...
Read More »