Nippon Pulse America, Inc.

Motion Control Chip features output speeds to 15 Mpps.
Agricultural & Farming Products

Motion Control Chip features output speeds to 15 Mpps.

Designed for controlling stepper and digital servomotors, PCL6143 quad-axis, single IC motion processor offloads intensive motion control functions from application's host processor. Product is driven by host microprocessor using 8- or 16-bit parallel bus. Sstandard features include linear interpolation, S-curve acceleration/deceleration control, comparators, encoder inputs, and ability to change...

Read More »
Stepper Motor Control offers plug and play functionality.
Controls & Controllers

Stepper Motor Control offers plug and play functionality.

Palm-sized Motion Checker(TM) MCH-2 integrates constant voltage driver, intended for tin-can type stepper motors, that is available in bipolar or unipolar configuration. Operated by front panel controls, users can create constant-speed motion or trapezoidal motion with programmable low and high speeds as well as ramp-up/down times. Unit, suited for field-testing and inspection, lets motion...

Read More »
Linear Servomotor has high precision and simple construction.
Electrical Equipment & Systems

Linear Servomotor has high precision and simple construction.

Direct-drive, backlash-free, Shaft Motor is driven by magnetic circuits consisting only of permanent magnets and coils. Coreless construction eliminates cogging, while high resolution of 0.14 nm makes motor suited for precise positioning. Unit provides virtually no fluctuation in speed and quiet operation due to absence of friction. It operates in harsh conditions such as vacuum situations and...

Read More »
Motion-Control Chips offer output speeds to 15 Mpps.
Agricultural & Farming Products

Motion-Control Chips offer output speeds to 15 Mpps.

Series PCL61x3 generates pulse and direction signals to create various motions for stepper and digital servo drives. Models PCL6113, PCL6123, and PCL6143 are 1-, 2-, and 4-axis models in 80-, 128-, and 176-pin QFP packages, respectively. Rated at 3.3 V, chips offer linear interpolation, operation-status confirmation, look-ahead buffer, and various homing modes. Applications include...

Read More »
Chips offer serial communications.
Agricultural & Farming Products

Chips offer serial communications.

Known as center device, Model G9001 has 256 bytes of RAM available for I/O and 512 bytes of RAM for motion control and data communication. I/O Models G9002 and G9003 serve as local devices that can be connected to G9001. Model G9002 has four 8-bit ports, and single-axis Model G9003 outputs 5 Mpps to control stepper or servomotors. CPU emulation device, Model G9004 can operate in CPU emulation...

Read More »
PC/104 Controller Card provides 4-axis motion control.
Architectural & Civil Engineering Products

PC/104 Controller Card provides 4-axis motion control.

Model NPMC6045A-4104 controls stepper motors or digital servomotors. It incorporates PCL6045A motion control chip and comes with C language library. With max output frequency of 6.5 Mpps, card can obtain trapezoidal and contant speed motion profiles. It performs linear and S-curve accel/decel, and circular and linear interpolation. A 28-bit up/down counter provides incremental encoder feedback....

Read More »
Motion Control Chip works with stepper motors.
Agricultural & Farming Products

Motion Control Chip works with stepper motors.

Available in 128-pin QFP, PCL6025 works with pulse/direction digital input servomotors. Product supports 2-axis motion controls using independent control of coordination control (linear or circular interpolation). Offerings include 6.5 Mpps output speed, linear or S-curve accel/decel, and on the fly positioning/speed changes. Chip also provides automatic correction of operating speed and...

Read More »
PC/104 Bus Controller suits semiconductor industries.
Architectural & Civil Engineering Products

PC/104 Bus Controller suits semiconductor industries.

Model NPMC5023-2104, for stepper motors, includes 2-axis control, 4.9M pps pulse rate capability for microstepping, S-curve ramp up and ramp down, encoder feedback inputs, and linear interpolation. It enables users to program individual motion profiles and includes software that uses Microsoft Windows® 98 for setup and testing. Also included as part of software package, is access to source...

Read More »
Motion Control Card has 4 axes.
Agricultural & Farming Products

Motion Control Card has 4 axes.

Model PPCI7443 4-axis motion control card allows control of stepper motors or servomotors. It incorporates PCL6045 control chip, and offers 32-bit PCI-bus plug and play capability, output frequency of 6.55 Mpps (max), trapezoidal and S-curve motion profile capability, and ability to change speed and position. Any combination of 2 of its 4 axes can be used for circular interpolation, or 2, 3, or 4...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers