Hermle Machine Company

Multi-Axis Manufacturing System handles 1-ton workpieces.
Communication Systems & Equipment

Multi-Axis Manufacturing System handles 1-ton workpieces.

Comprised of 6-axis robot, pallet storage magazine, and one or two model C 50 U 5-axis machining centers, RS 4 flexible manufacturing system (FMS) can automatically handle loads up to 1,000 kg - including workpiece, fixture, and pallet. It also has integral, +30/-115 degree swiveling trunnion supporting rotary table. Capable of single-digit micron accuracy, FMS employs up to 18,000 rpm spindle...

Read More »
Hermle to Introduce Two New Machining Centers and Demonstrate 5-Axis Capability at IMTS 2008
Communication Systems & Equipment

Hermle to Introduce Two New Machining Centers and Demonstrate 5-Axis Capability at IMTS 2008

Franklin, WI (For Immediate Release) - Hermle Machine Company of Franklin, Wisconsin, the North American headquarters of Maschinenfabrik Berthold Hermle AG located in Gosheim, Germany, will be introducing two new machining centers, the B 300 and the C 50 U, to the North American market, as well as demonstrating 5-axis machining of a variety of parts in Booth #A-8265 at IMTS 2008. Available in...

Read More »
Machining Center is available in 3- and 5-axis configurations.
Communication Systems & Equipment

Machining Center is available in 3- and 5-axis configurations.

B 300 machining center incorporates gantry design, trunion table mounted on bearings, and mineral casting base with low thermal conductivity and vibration dampening properties. X, Y, and Z axes are 800-600-500 mm, respectively, with traverse of 30 m/min in all axes. Main drive, capable of up to 19 kW, powers 15,000 rpm spindle. Three-axis version has 1,000 x 560 mm, 1,500 kg capacity clamping...

Read More »
Vertical Machining Center targets moldmakers/subcontractors.
Communication Systems & Equipment

Vertical Machining Center targets moldmakers/subcontractors.

Model B 300 5-axis vertical machining center features 5 m/sÂ-² acceleration in linear axes, 6 sec chip-to-chip tool change from 30-station magazine, and 15,000 rpm/19 kW spindle to assist when machining deep cavities. Linear axis travels are 800, 600, 500 mm for X, Y, and Z axis, respectively, rapid motion in linear axes is 30 m/min, and 2 rotary axis movements are 360° for various...

Read More »
Machinery & Machining Tools

Hermle Exhibits C 30 U - 5-Axis Machining for Mid-Sized Parts -at Las Vegas and Milwaukee Shows

Franklin, WI- Hermle Machine Company's C 30 U - developed in response to the ever-increasing demand for 5-axis parts, coupled with the use of new alloys and non-traditional materials - will be featured at Booth #116 at the American Manufacturing Expo (AMMO) in the Las Vegas Convention Center, September 18-20, 2007. It will again be demonstrated at the 10th Wisconsin Manufacturing and Machine Tool...

Read More »
Machining Center handles large, heavy parts.
Communication Systems & Equipment

Machining Center handles large, heavy parts.

With X, Y, and Z axis travels of 1,000, 1,100, and 700 mm respectively, C 50 U Dynamic carries max workpiece weight of 2,000 kg. Linear rapid traverse rate is 60 m/min in X and Y axes and 55 m/min in Z axis. Available with NC swiveling rotary table with clamping surface of Ã-ƒÃ‹Âœ700 mm or optional Ø1,150 x 900 mm, machining center is suitable for simultaneous 5-axis...

Read More »
Machining Center produces complex 5-axis parts.

Machining Center produces complex 5-axis parts.

Model C 20 U machining center features modified gantry design with 3 linear axes in tool and 2 rotary axes in trunnion. Constructed on 1-piece poured mineral casting base, travels in X, Y and Z axes are 600, 450, and 450 mm, respectively, with traverse rate of 45 m/min with A and C axes at 25 rpm. With +114° swivel range and maximum table load of 300 kg, NC rotary table accommodates pallets...

Read More »
Machining Center handles large, heavy parts and molds.
Communication Systems & Equipment

Machining Center handles large, heavy parts and molds.

With X, Y, and Z axis travels of 1,000, 1,100, and 700 mm, respectively, Model C 50 U accommodates max workpiece weight of 2,000 kg. It offers rapid traverse linear rate of 60 m/min in X and Y axes and 55 m/min in Z axis. Standard NC swiveling rotary table provides clamping surface up to 700 mm diameter. Machine is suited for 5-axis and/or 5-sided machining of large automotive and aircraft parts...

Read More »
Machining Center performs full 5-axis machining.
Communication Systems & Equipment

Machining Center performs full 5-axis machining.

Modular C 30 U Dynamic(TM) Machining Center utilizes proprietary gantry design combined with 630 mm diameter tilting rotary table capable of simultaneous machining of work pieces up to 800 mm. Rotational speed is 65 rpm for C-axis (360°) and 25 rpm for trunnion type A-axis (+30°/-115°). Equipped with 32-tool pockets, machine features rapid traverse rate of 45 m/min in X (650...

Read More »
Multi-Axis Manufacturing System handles 1-ton workpieces.
Communication Systems & Equipment

Multi-Axis Manufacturing System handles 1-ton workpieces.

Comprised of 6-axis robot, pallet storage magazine, and one or two model C 50 U 5-axis machining centers, RS 4 flexible manufacturing system (FMS) can automatically handle loads up to 1,000 kg - including workpiece, fixture, and pallet. It also has integral, +30/-115 degree swiveling trunnion supporting rotary table. Capable of single-digit micron accuracy, FMS employs up to 18,000 rpm spindle...

Read More »
Hermle to Introduce Two New Machining Centers and Demonstrate 5-Axis Capability at IMTS 2008
Communication Systems & Equipment

Hermle to Introduce Two New Machining Centers and Demonstrate 5-Axis Capability at IMTS 2008

Franklin, WI (For Immediate Release) - Hermle Machine Company of Franklin, Wisconsin, the North American headquarters of Maschinenfabrik Berthold Hermle AG located in Gosheim, Germany, will be introducing two new machining centers, the B 300 and the C 50 U, to the North American market, as well as demonstrating 5-axis machining of a variety of parts in Booth #A-8265 at IMTS 2008. Available in...

Read More »
Machining Center is available in 3- and 5-axis configurations.
Communication Systems & Equipment

Machining Center is available in 3- and 5-axis configurations.

B 300 machining center incorporates gantry design, trunion table mounted on bearings, and mineral casting base with low thermal conductivity and vibration dampening properties. X, Y, and Z axes are 800-600-500 mm, respectively, with traverse of 30 m/min in all axes. Main drive, capable of up to 19 kW, powers 15,000 rpm spindle. Three-axis version has 1,000 x 560 mm, 1,500 kg capacity clamping...

Read More »
Vertical Machining Center targets moldmakers/subcontractors.
Communication Systems & Equipment

Vertical Machining Center targets moldmakers/subcontractors.

Model B 300 5-axis vertical machining center features 5 m/sÂ-² acceleration in linear axes, 6 sec chip-to-chip tool change from 30-station magazine, and 15,000 rpm/19 kW spindle to assist when machining deep cavities. Linear axis travels are 800, 600, 500 mm for X, Y, and Z axis, respectively, rapid motion in linear axes is 30 m/min, and 2 rotary axis movements are 360° for various...

Read More »
Machinery & Machining Tools

Hermle Exhibits C 30 U - 5-Axis Machining for Mid-Sized Parts -at Las Vegas and Milwaukee Shows

Franklin, WI- Hermle Machine Company's C 30 U - developed in response to the ever-increasing demand for 5-axis parts, coupled with the use of new alloys and non-traditional materials - will be featured at Booth #116 at the American Manufacturing Expo (AMMO) in the Las Vegas Convention Center, September 18-20, 2007. It will again be demonstrated at the 10th Wisconsin Manufacturing and Machine Tool...

Read More »
Company News

Hermle Machine Company - Open House June 21st & 22nd

Hermle Open House will Feature Multiple Participants Franklin, WI -- Hermle Machine Company will conduct an Open House at its Franklin, Wisconsin, headquarters on June 21st and 22nd from 10:00 a.m. to 4:00 p.m. The event is open to manufacturers, job shop owners, and other interested personnel and will feature exhibits and demonstrations of Hermle's C Series 5-axis machining centers, as well as...

Read More »
Machining Center handles large, heavy parts.
Communication Systems & Equipment

Machining Center handles large, heavy parts.

With X, Y, and Z axis travels of 1,000, 1,100, and 700 mm respectively, C 50 U Dynamic carries max workpiece weight of 2,000 kg. Linear rapid traverse rate is 60 m/min in X and Y axes and 55 m/min in Z axis. Available with NC swiveling rotary table with clamping surface of Ã-ƒÃ‹Âœ700 mm or optional Ø1,150 x 900 mm, machining center is suitable for simultaneous 5-axis...

Read More »
Machining Center produces complex 5-axis parts.

Machining Center produces complex 5-axis parts.

Model C 20 U machining center features modified gantry design with 3 linear axes in tool and 2 rotary axes in trunnion. Constructed on 1-piece poured mineral casting base, travels in X, Y and Z axes are 600, 450, and 450 mm, respectively, with traverse rate of 45 m/min with A and C axes at 25 rpm. With +114° swivel range and maximum table load of 300 kg, NC rotary table accommodates pallets...

Read More »
Machining Center handles large, heavy parts and molds.
Communication Systems & Equipment

Machining Center handles large, heavy parts and molds.

With X, Y, and Z axis travels of 1,000, 1,100, and 700 mm, respectively, Model C 50 U accommodates max workpiece weight of 2,000 kg. It offers rapid traverse linear rate of 60 m/min in X and Y axes and 55 m/min in Z axis. Standard NC swiveling rotary table provides clamping surface up to 700 mm diameter. Machine is suited for 5-axis and/or 5-sided machining of large automotive and aircraft parts...

Read More »
Machining Center performs full 5-axis machining.
Communication Systems & Equipment

Machining Center performs full 5-axis machining.

Modular C 30 U Dynamic(TM) Machining Center utilizes proprietary gantry design combined with 630 mm diameter tilting rotary table capable of simultaneous machining of work pieces up to 800 mm. Rotational speed is 65 rpm for C-axis (360°) and 25 rpm for trunnion type A-axis (+30°/-115°). Equipped with 32-tool pockets, machine features rapid traverse rate of 45 m/min in X (650...

Read More »

All Topics