AMETEK Factory Automation

New GEMCO 958A Linear Displacement Transducer is Resistant to a Shock of 1,000 Gs
Sensors, Monitors & Transducers

New GEMCO 958A Linear Displacement Transducer is Resistant to a Shock of 1,000 Gs

GEMCO® 958A Linear Displacement Transducer is offered in stainless steel housing with a depth of less than 3.05 cm. Unit is suitable for applications such as steel making, agricultural equipment, transportation and automation industry. The transducer uses magenetostrictive technology for an analog position feedback that provides an accuracy of 0.04% of the sensing distance. Unit features a...

Read More »
GEMCO® 958A Transducer features shock resistance of 1000Gs.
Sensors, Monitors & Transducers

GEMCO® 958A Transducer features shock resistance of 1000Gs.

Available in span lengths from 50mm to 2540mm, GEMCO® 958A transducer is powered from 8 to 30 VDC at 1.6 watts. Offering vibration tolerance of 30Gs, product comes with built-in diagnostics capability for displaying health of unit and helps in troubleshooting. Designed with rugged, rod style for fitting into hydraulic or clevis style cylinder, transducer is suitable in heavy duty commercial...

Read More »
Linear Displacement Transducer has smart Ethernet technology.
Sensors, Monitors & Transducers

Linear Displacement Transducer has smart Ethernet technology.

Simplifying installation and wiring, GEMCO® ReadyLink™ is designed with EtherNet/IP™ network interface that requires single point network connection for configuration and control. Magnetostrictive technology is used to provide absolute non-contact feedback. Available in 953N Rod Style and 957N Brik™ Low-Profile Style packages, product supports Line, Star, or Device Level Ring...

Read More »
Linear Displacement Transducer has SSI output, mill-duty housing.
Sensors, Monitors & Transducers

Linear Displacement Transducer has SSI output, mill-duty housing.

Fully digital VMax Linear Displacement Transducers (LDTs) of GEMCO 953S Series offer absolute position indication with 1 micron resolution and feature Synchronous Serial Interface (SSI) output. This allows LDT to measure tight tolerances over cable runs to 1,200 ft with stable position feedback. Mill duty housing protects LDT from physical and environmental damage while promoting mounting...

Read More »
Sensors, Monitors & Transducers

Linear Displacement Transducer uses magnetostrictive technology.

With no moving parts to wear out, AMETEK/Gemco 955 eBrik provides continuous position feedback when installed on automated factory machinery. Unit is available in stroke lengths from 1-72 in. with analog output of 0-10 Vdc or 4-20 mA. Sensor offers field programmable zero and span settings, electronic diagnostic feedback, and accuracy to ±0.03% of stroke. With IP67-rated aluminum enclosure,...

Read More »
Sensors, Monitors & Transducers

Linear Displacement Transducer features self-contained design.

Utilizing magnetostrictive position-sensing technology, GEMCO® 955 eBrik(TM) is suited for linear potentiometers typically found in plastics, tire and rubber, web tensioning, and factory automation. IP67-rated unit is resistant to contaminants and environmental conditions. Available in stroke lengths from 1-72 in., device offers variety of analog output signals from 0-10 Vdc or 4-20 mA....

Read More »
Variable Level Liquid Sensor measures multiple layers.
Sensors, Monitors & Transducers

Variable Level Liquid Sensor measures multiple layers.

Designed to provide single sensor for measurement of multiple layers of oil products and gas condensates, including water layers, multi-variable Series 7230 HT digital probes provide total level, interface level, up to 5 temperature readings, and diagnostic function. Accuracy is 0.01% of measured span; signal resolution and repeatability are .0001 in. Sensors have FM and CSA explosionproof rating...

Read More »
Company News

Automation Inside Readers' Choice Award for Gemco 2006 Rotary Limit Switch

Horsham, USA, Jan. 27, 2020 – AMETEK Factory Automation, the manufacturer of Gemco rotary limit switches, received the Automation Inside Readers’ Choice Award 2019 for Best Encoder. The Gemco 2006 Rotary Limit Switch controls the intermediate and end limits of linear or rotary motion on cranes, hoists, packaging machinery, conveyors, doors, or material handling equipment, preventing them...

Read More »
New GEMCO 958A Linear Displacement Transducer is Resistant to a Shock of 1,000 Gs
Sensors, Monitors & Transducers

New GEMCO 958A Linear Displacement Transducer is Resistant to a Shock of 1,000 Gs

GEMCO® 958A Linear Displacement Transducer is offered in stainless steel housing with a depth of less than 3.05 cm. Unit is suitable for applications such as steel making, agricultural equipment, transportation and automation industry. The transducer uses magenetostrictive technology for an analog position feedback that provides an accuracy of 0.04% of the sensing distance. Unit features a...

Read More »
GEMCO® 958A Transducer features shock resistance of 1000Gs.
Sensors, Monitors & Transducers

GEMCO® 958A Transducer features shock resistance of 1000Gs.

Available in span lengths from 50mm to 2540mm, GEMCO® 958A transducer is powered from 8 to 30 VDC at 1.6 watts. Offering vibration tolerance of 30Gs, product comes with built-in diagnostics capability for displaying health of unit and helps in troubleshooting. Designed with rugged, rod style for fitting into hydraulic or clevis style cylinder, transducer is suitable in heavy duty commercial...

Read More »
Linear Displacement Transducer has smart Ethernet technology.
Sensors, Monitors & Transducers

Linear Displacement Transducer has smart Ethernet technology.

Simplifying installation and wiring, GEMCO® ReadyLink™ is designed with EtherNet/IP™ network interface that requires single point network connection for configuration and control. Magnetostrictive technology is used to provide absolute non-contact feedback. Available in 953N Rod Style and 957N Brik™ Low-Profile Style packages, product supports Line, Star, or Device Level Ring...

Read More »
Linear Displacement Transducer has SSI output, mill-duty housing.
Sensors, Monitors & Transducers

Linear Displacement Transducer has SSI output, mill-duty housing.

Fully digital VMax Linear Displacement Transducers (LDTs) of GEMCO 953S Series offer absolute position indication with 1 micron resolution and feature Synchronous Serial Interface (SSI) output. This allows LDT to measure tight tolerances over cable runs to 1,200 ft with stable position feedback. Mill duty housing protects LDT from physical and environmental damage while promoting mounting...

Read More »
Sensors, Monitors & Transducers

Linear Displacement Transducer uses magnetostrictive technology.

With no moving parts to wear out, AMETEK/Gemco 955 eBrik provides continuous position feedback when installed on automated factory machinery. Unit is available in stroke lengths from 1-72 in. with analog output of 0-10 Vdc or 4-20 mA. Sensor offers field programmable zero and span settings, electronic diagnostic feedback, and accuracy to ±0.03% of stroke. With IP67-rated aluminum enclosure,...

Read More »
Sensors, Monitors & Transducers

Linear Displacement Transducer features self-contained design.

Utilizing magnetostrictive position-sensing technology, GEMCO® 955 eBrik(TM) is suited for linear potentiometers typically found in plastics, tire and rubber, web tensioning, and factory automation. IP67-rated unit is resistant to contaminants and environmental conditions. Available in stroke lengths from 1-72 in., device offers variety of analog output signals from 0-10 Vdc or 4-20 mA....

Read More »

All Topics