SCHUNK
Morrisville, NC 27560
Digital Control Mechatronic Gripper delivers process stability.
Powered by- brushless DC servo motor and controlled by digital I/O, PGN-Plus-E offers gripping force that can be adjusted in 4 levels and comes in size 80. Multi-tooth guidance, designed for higher moment capacity, features continuous lubrication pocket in guide contour and wedge-hook kinematics with maximized surface coverage in all stroke positions. Suited for industrial environments,...
Read More »Centric Clamping Vise increases versatility via adaptability.
The SCHUNK KONTEC KSC 80 centric clamping vise is a multifaceted component that has optimal jaw support for I.D. and O.D. clamping. It can be easily adapted for conventional clamping, short clamping depths for 5-sided machining, mould parts, plates or saw cuts. The KSC 80 is known for high precision and process reliability, with an extremely flat design. A pre-tensioned and backlash-free center...
Read More »
Digital Control Mechatronic Gripper delivers process stability.
Powered byÃ- brushless DC servo motor and controlled by digital I/O, PGN-Plus-E offers gripping force that can be adjusted inÃÂ 4 levels and comes in size 80. Multi-tooth guidance, designed for higher moment capacity,ÃÂ featuresÃÂ continuous lubrication pocket in guide contour and wedge-hook kinematics with maximized surface coverage in all stroke positions. Suited for...
Read More »Centric Clamping Vise increases versatility via adaptability.
The SCHUNK KONTEC KSC 80 centric clamping vise is a multifaceted component that has optimal jaw support for I.D. and O.D. clamping. It can be easily adapted for conventional clamping, short clamping depths for 5-sided machining, mould parts, plates or saw cuts. The KSC 80 is known for high precision and process reliability, with an extremely flat design. A pre-tensioned and backlash-free center...
Read More »
Pneumatic Gripper is designed for optimized capacity.
Offered- in sizes 50–125, PGN-Plus-P can be used in cleanrooms and areas with high temperatures/contamination/aggressive media. Supporting dimensions between 6 load-bearing shoulders of multi-tooth guidance maximize allowed moment capacity, while drive piston area increases grip force to handle higher workpiece weights. Permanent lubrication is provided through continuous pockets in...
Read More »
Pneumatic Gripper is designed for optimized capacity.
OfferedÃ- in sizes 50–125, PGN-Plus-P can be used in cleanroomsÃÂ and areas with high temperatures/contamination/aggressive media. Supporting dimensions betweenÃÂ 6 load-bearing shoulders of multi-tooth guidance maximize allowed moment capacity, while drive piston area increases grip force to handle higher workpiece weights. Permanent lubrication is provided...
Read More »
Rapid Mechatronic Gripper handles small parts.
Available in size 25, Model EGP 25 provides stroke of 3 mm per finger. Optional EGP 25 Speed version reduces internal gear ratio, exchanging grip force for speed to open or close in 0.03 seconds. With grip force of 13 N, unit is capable of handling parts up to 0.05 kg. Maintenance-free servomotors as well as powerful junction roller guide guarantee maximum efficiency, making electric IP30-rated...
Read More »
Rapid Mechatronic Gripper handles small parts.
Available in size 25, Model EGP 25 provides stroke of 3 mm per finger. Optional EGP 25 Speed version reduces internal gear ratio, exchanging grip force for speed to open or close in 0.03 seconds. With grip force of 13 N, unit is capable of handling parts up to 0.05 kg. Maintenance-free servomotors as well as powerful junction roller guide guarantee maximum efficiency, making electric IP30-rated...
Read More »
Modular System enables direct workpiece clamping.
For applications requiring- small batch sizes, precision, and complex geometries, modular direct workpiece clamping system consists of VERO-S WDB base modules for machine table, VERO-S WDN clamping modules, and freely combinable VERO-S WDS stacking modules. Standard heights of latter are 30 and 50 mm to allow fine graduations of 10 mm in height of clamping columns. Distortion-free...
Read More »
Modular System enables direct workpiece clamping.
For applications requiringÃ- small batch sizes, precision, and complex geometries, modularÃÂ direct workpiece clamping system consists of VERO-S WDB base modules for machine table, VERO-S WDN clamping modules, and freely combinable VERO-S WDS stacking modules. Standard heights of latterÃÂ are 30 and 50 mm to allow fine graduations of 10 mm in height of clamping columns....
Read More »