SCHUNK

Machinery & Machining Tools

Workholding System utilizes electro-permanent magnets.

Available with pole sizes of 50, 75, and 100 mm, MAGNOS Magnetic workholding delivers uniform clamping force due to poles' square geometry. Additional pole extensions are available as accessories to improve workpiece location and compensate for surface irregularities. Pole extensions act as workpiece support, aiding in precise positioning of different workpieces. Use of magnets enables 5-sided...

Read More »
Machinery & Machining Tools

Workholding System utilizes electro-permanent magnets.

Available with pole sizes of 50, 75, and 100 mm, MAGNOS Magnetic workholding delivers uniform clamping force due to poles' square geometry. Additional pole extensions are available as accessories to improve workpiece location and compensate for surface irregularities. Pole extensions act as workpiece support, aiding in precise positioning of different workpieces. Use of magnets enables 5-sided...

Read More »
Lathe Chuck has design that facilitates jaw exchange.
Machinery & Machining Tools

Lathe Chuck has design that facilitates jaw exchange.

Sealed against particle and coolant intrusion, THW-plus has jaws that can be exchanged in under 1 min and maintains gripping forces up to 6,000 rpm with wedge bar actuation system. Internal interlock prevents removal of chuck wrench when quick-change jaw is not properly installed. Center sleeve, removable from front, is available in through-hole, closed, adjustable coolant, adjustable stop, and...

Read More »
Lathe Chuck has design that facilitates jaw exchange.
Machinery & Machining Tools

Lathe Chuck has design that facilitates jaw exchange.

Sealed against particle and coolant intrusion, THW-plus has jaws that can be exchanged in under 1 min and maintains gripping forces up to 6,000 rpm with wedge bar actuation system. Internal interlock prevents removal of chuck wrench when quick-change jaw is not properly installed. Center sleeve, removable from front, is available in through-hole, closed, adjustable coolant, adjustable stop, and...

Read More »
Toolholding System offers alternative to collet styles.
Architectural & Civil Engineering Products

Toolholding System offers alternative to collet styles.

Available with CAT 40 or HSK-A 63 spindle interfaces, SINO-T offers vibration dampening and run-out accuracy of 5 microns. Stiff body acts as clamping medium, providing consistent support across clamping zone. Actuation is performed by C-spanner wrench. Standard version of SINO-T is fine balanced to G6.3 at 15,000 rpm, protecting machine spindle and tool's cutting edge from damage. Intermediate...

Read More »
Toolholding System offers alternative to collet styles.
Architectural & Civil Engineering Products

Toolholding System offers alternative to collet styles.

Available with CAT 40 or HSK-A 63 spindle interfaces, SINO-T offers vibration dampening and run-out accuracy of 5 microns. Stiff body acts as clamping medium, providing consistent support across clamping zone. Actuation is performed by C-spanner wrench. Standard version of SINO-T is fine balanced to G6.3 at 15,000 rpm, protecting machine spindle and tool's cutting edge from damage. Intermediate...

Read More »
Concentric Grippers produce 580-18,000 N grip force.
Material Handling & Storage

Concentric Grippers produce 580-18,000 N grip force.

Available in 5 body sizes from 64-60 mm, 3-finger Series PZN-plus offers stroke from 12-50 mm. Gripping positions of open, closed, or part present are monitored with magnetic or inductive switches. Forces and moments of gripper are spread over several surfaces of multiple-tooth guide. Moment loading capability is maximized, allowing high external loads to be applied without damage. For part...

Read More »
Concentric Grippers produce 580-18,000 N grip force.
Material Handling & Storage

Concentric Grippers produce 580-18,000 N grip force.

Available in 5 body sizes from 64-60 mm, 3-finger Series PZN-plus offers stroke from 12-50 mm. Gripping positions of open, closed, or part present are monitored with magnetic or inductive switches. Forces and moments of gripper are spread over several surfaces of multiple-tooth guide. Moment loading capability is maximized, allowing high external loads to be applied without damage. For part...

Read More »
Clamping Module features holding forces to 75,000 N.
Electrical Equipment & Systems

Clamping Module features holding forces to 75,000 N.

Measuring 196 mm in dia, NSE 196 module is mechanically clamped and pneumatically opened, allowing clamped system to be moved in clamped state without interference from air lines. Clamping pin has a 61 mm dia through hole, which makes it possible for workpiece to protrude through clamping system. To facilitate orientation of fixture plates, module also comes with 12 mm precision bore on face.

Read More »
Clamping Module features holding forces to 75,000 N.
Electrical Equipment & Systems

Clamping Module features holding forces to 75,000 N.

Measuring 196 mm in dia, NSE 196 module is mechanically clamped and pneumatically opened, allowing clamped system to be moved in clamped state without interference from air lines. Clamping pin has a 61 mm dia through hole, which makes it possible for workpiece to protrude through clamping system. To facilitate orientation of fixture plates, module also comes with 12 mm precision bore on face.

Read More »

All Topics