SCHUNK

Pneumatic Pick and Place Unit operates at up to 120 cycles/min.
Robotics

Pneumatic Pick and Place Unit operates at up to 120 cycles/min.

PPU-P comes with valve control unit (VCU) that minimizes compressed air and energy consumption while accelerating cycle frequency; 5–9 micro valves use one air line connected to back of VCU. With cycle times down to 20 msec, VCU- can also control gripper on PPU-P. Horizontal and vertical motion of PPU-P unit overlap and are positively driven by curved roller cam. At 145 mm horizontal...

Read More »
Hydraulic Expansion Toolholder maximizes force, flexibility.
Architectural & Civil Engineering Products

Hydraulic Expansion Toolholder maximizes force, flexibility.

Allowing tool to be clamped directly in mounting taper, TENDO-ES allows- tool shank to be supported via spindle. This results in max holding forces, transferable torque, and space conservation. TENDOS-ES L1 is 26.0 mm and has run-out accuracy of less than 0.003 mm; tools can be changed in seconds with Allen key. Available for SK 40 and CAT 40 interfaces, TENDO-ES offers clamping...

Read More »
Pneumatic Pick and Place Unit operates at up to 120 cycles/min.
Robotics

Pneumatic Pick and Place Unit operates at up to 120 cycles/min.

PPU-P comes with valve control unit (VCU) that minimizes compressed air and energy consumption while accelerating cycle frequency; 5–9 micro valves use one air line connected to back of VCU. With cycle times down to 20 msec, VCUÂ- can also control gripper on PPU-P. Horizontal and vertical motion of PPU-P unit overlap and are positively driven by curved roller cam. At 145 mm...

Read More »
Hydraulic Expansion Toolholder maximizes force, flexibility.
Architectural & Civil Engineering Products

Hydraulic Expansion Toolholder maximizes force, flexibility.

Allowing tool to be clamped directly in mounting taper, TENDO-ES allowsÂ- tool shank to be supported via spindle. This results in max holding forces, transferable torque, and space conservation. TENDOS-ES L1 is 26.0 mm and has run-out accuracy of less than 0.003 mm; tools can be changed in seconds with Allen key. Available for SK 40 and CAT 40 interfaces,...

Read More »
Stroke Module offers repeat accuracy of 0.01 mm.
Machinery & Machining Tools

Stroke Module offers repeat accuracy of 0.01 mm.

Featuring rigid design and hydraulic dampening of end positions, Model HLM is suited for automated assembly. Pre-clamped, scope-free cross roller guidances assure high guiding accuracy and precision. Available in 4 sizes with strokes from 0–150 mm, module provides feed rates to 482 N and torsional moment to 81.7 Nm. Stroke can be continuously fine-adjusted per side by up to 25 mm. In case of...

Read More »
Stroke Module offers repeat accuracy of 0.01 mm.
Machinery & Machining Tools

Stroke Module offers repeat accuracy of 0.01 mm.

Featuring rigid design and hydraulic dampening of end positions, Model HLM is suited for automated assembly. Pre-clamped, scope-free cross roller guidances assure high guiding accuracy and precision. Available in 4 sizes with strokes from 0–150 mm, module provides feed rates to 482 N and torsional moment to 81.7 Nm. Stroke can be continuously fine-adjusted per side by up to 25 mm. In case of...

Read More »
Rotary Module includes center hole for cable feed through.
Communication Systems & Equipment

Rotary Module includes center hole for cable feed through.

The new ERS rotary module from SCHUNK is the successor of the proven STM module. Compact dimensions, and a center hole for cable feed-through, are ideal preconditions for designing compact and orderly arranged high performance systems. It is multi-functional and can be used as a freely programmable rotary indexing table, as a workpiece support for laser welding machines, or as a axis of rotation...

Read More »
Rotary Module includes center hole for cable feed through.
Communication Systems & Equipment

Rotary Module includes center hole for cable feed through.

The new ERS rotary module from SCHUNK is the successor of the proven STM module. Compact dimensions, and a center hole for cable feed-through, are ideal preconditions for designing compact and orderly arranged high performance systems. It is multi-functional and can be used as a freely programmable rotary indexing table, as a workpiece support for laser welding machines, or as a axis of rotation...

Read More »
Grippers integrate distance and presence sensor.
Material Handling & Storage

Grippers integrate distance and presence sensor.

SCHUNK has enlarged its vast modular system of grippers again. As the first ever standardized gripper, the PGN-plus universal gripper, and the MPG-plus gripper for small components from SCHUNK are now equipped with an integrated distance and presence sensor. With the new OAS, both modules quickly transform into seeing" grippers without needing an expensive vision system. The optical system can be...

Read More »
Grippers integrate distance and presence sensor.
Material Handling & Storage

Grippers integrate distance and presence sensor.

SCHUNK has enlarged its vast modular system of grippers again. As the first ever standardized gripper, the PGN-plus universal gripper, and the MPG-plus gripper for small components from SCHUNK are now equipped with an integrated distance and presence sensor. With the new OAS, both modules quickly transform into seeing" grippers without needing an expensive vision system. The optical system can be...

Read More »

All Topics