SCHUNK
Morrisville, NC 27560
New 5-axis Vise with Integrated Elastomer Damping
KSX-C2 seamlessly fits into the modular system for high-efficient workpiece clamping. Achieves good results in terms of plane-parallelism and perpendicularity with its active jaw pull-down. Offered in four base body lengths such as 330, 430, 500, 630 and 800 mm.
Read More »New 5-axis Vise with Integrated Elastomer Damping
KSX-C2 seamlessly fits into the modular system for high-efficient workpiece clamping. Achieves good results in terms of plane-parallelism and perpendicularity with its active jaw pull-down. Offered in four base body lengths such as 330, 430, 500, 630 and 800 mm.
Read More »New SCHUNK ROTA-M Flex 2+2 Chuck Amounts to 5.1 mm up to 10 mm per Jaw
Chuck sizes 260 to 1200, achieve jaw strokes from 9.5 mm to 17.8 mm and high clamping forces from 100 kN to 180 kN. Equipped with grooves and fixed stops allowing the chuck to also be used as a vise. Stocked with a flexible serration (1.5 mm x 60° or 1/16“x 90°).
Read More »New SCHUNK ROTA-M Flex 2+2 Chuck Amounts to 5.1 mm up to 10 mm per Jaw
Chuck sizes 260 to 1200, achieve jaw strokes from 9.5 mm to 17.8 mm and high clamping forces from 100 kN to 180 kN. Equipped with grooves and fixed stops allowing the chuck to also be used as a vise. Stocked with a flexible serration (1.5 mm x 60° or 1/16“x 90°).
Read More »New ADHESO Gripper Uses Intermolecularly Acting Van der Waals Forces
Allows gripping times of < 100 ms. Achieves repetitive positioning accuracies of < 0.01 mm. Can be used in conventional industrial environments, cleanrooms and vacuum environments for handling.
Read More »New ADHESO Gripper Uses Intermolecularly Acting Van der Waals Forces
Allows gripping times of < 100 ms. Achieves repetitive positioning accuracies of < 0.01 mm. Can be used in conventional industrial environments, cleanrooms and vacuum environments for handling.
Read More »New iTENDO Sensory Toolholder Comes with Integrated Display
Equipped with sensor, battery, and transmitting unit that records the data at the tool and transmits it wirelessly via Bluetooth. Suitable for the use of coolant and is designed for speeds of up to 10,000 RPM. Records metal cutting process, monitors previously defined exact limit values and enables real-time adaptive control of the speed of rotation and feed rate.
Read More »New iTENDO Sensory Toolholder Comes with Integrated Display
Equipped with sensor, battery, and transmitting unit that records the data at the tool and transmits it wirelessly via Bluetooth. Suitable for the use of coolant and is designed for speeds of up to 10,000 RPM. Records metal cutting process, monitors previously defined exact limit values and enables real-time adaptive control of the speed of rotation and feed rate.
Read More »New Clamping Module for Compact Applications in Metal Cutting Industry
VERO-S NSE mikro 49-13 is actuated via an axial piston and achieves high pull-down forces despite the compact dimensions. Combines compact dimensions, high pull-down and holding forces, a high dimensional stability and a high repeat accuracy of < 0.005 mm. Locking is done mechanically via a spring assembly, it is self-retaining and locks form-fit.
Read More »New Clamping Module for Compact Applications in Metal Cutting Industry
VERO-S NSE mikro 49-13 is actuated via an axial piston and achieves high pull-down forces despite the compact dimensions. Combines compact dimensions, high pull-down and holding forces, a high dimensional stability and a high repeat accuracy of < 0.005 mm. Locking is done mechanically via a spring assembly, it is self-retaining and locks form-fit.
Read More »New 5-axis Vise with Integrated Elastomer Damping
KSX-C2 seamlessly fits into the modular system for high-efficient workpiece clamping. Achieves good results in terms of plane-parallelism and perpendicularity with its active jaw pull-down. Offered in four base body lengths such as 330, 430, 500, 630 and 800 mm.
Read More »New 5-axis Vise with Integrated Elastomer Damping
KSX-C2 seamlessly fits into the modular system for high-efficient workpiece clamping. Achieves good results in terms of plane-parallelism and perpendicularity with its active jaw pull-down. Offered in four base body lengths such as 330, 430, 500, 630 and 800 mm.
Read More »New SCHUNK ROTA-M Flex 2+2 Chuck Amounts to 5.1 mm up to 10 mm per Jaw
Chuck sizes 260 to 1200, achieve jaw strokes from 9.5 mm to 17.8 mm and high clamping forces from 100 kN to 180 kN. Equipped with grooves and fixed stops allowing the chuck to also be used as a vise. Stocked with a flexible serration (1.5 mm x 60° or 1/16“x 90°).
Read More »New SCHUNK ROTA-M Flex 2+2 Chuck Amounts to 5.1 mm up to 10 mm per Jaw
Chuck sizes 260 to 1200, achieve jaw strokes from 9.5 mm to 17.8 mm and high clamping forces from 100 kN to 180 kN. Equipped with grooves and fixed stops allowing the chuck to also be used as a vise. Stocked with a flexible serration (1.5 mm x 60° or 1/16“x 90°).
Read More »New ADHESO Gripper Uses Intermolecularly Acting Van der Waals Forces
Allows gripping times of < 100 ms. Achieves repetitive positioning accuracies of < 0.01 mm. Can be used in conventional industrial environments, cleanrooms and vacuum environments for handling.
Read More »New ADHESO Gripper Uses Intermolecularly Acting Van der Waals Forces
Allows gripping times of < 100 ms. Achieves repetitive positioning accuracies of < 0.01 mm. Can be used in conventional industrial environments, cleanrooms and vacuum environments for handling.
Read More »New iTENDO Sensory Toolholder Comes with Integrated Display
Equipped with sensor, battery, and transmitting unit that records the data at the tool and transmits it wirelessly via Bluetooth. Suitable for the use of coolant and is designed for speeds of up to 10,000 RPM. Records metal cutting process, monitors previously defined exact limit values and enables real-time adaptive control of the speed of rotation and feed rate.
Read More »New iTENDO Sensory Toolholder Comes with Integrated Display
Equipped with sensor, battery, and transmitting unit that records the data at the tool and transmits it wirelessly via Bluetooth. Suitable for the use of coolant and is designed for speeds of up to 10,000 RPM. Records metal cutting process, monitors previously defined exact limit values and enables real-time adaptive control of the speed of rotation and feed rate.
Read More »SCHUNK Announces New Vice President of Toolholding and Workholding Sales
SCHUNK is proud to announce the promotion of Allan Logan to Vice President of Sales, Toolholding and Workholding. Allan has more than 20 years of territory sales and team management experience in the metalworking industry. He started his career in account management for cutting tools and abrasives before holding various roles as sales engineer, aerospace industry specialist, and regional sales...
Read More »SCHUNK Announces New Vice President of Toolholding and Workholding Sales
SCHUNK is proud to announce the promotion of Allan Logan to Vice President of Sales, Toolholding and Workholding. Allan has more than 20 years of territory sales and team management experience in the metalworking industry. He started his career in account management for cutting tools and abrasives before holding various roles as sales engineer, aerospace industry specialist, and regional sales...
Read More »