Morrisville, NC 27560
Pick and Place Unit handles weights up to 5 kg.
For complete cycle with 280 mm horizontal and 105 mm vertical stroke, linear motor driven Model PPU-E 50 has cycle time of 0.92 seconds with tooling mass of 2 kg and 2 x 60 ms (for gripper). Max acceleration is 100 ms-2 and max speed is 4 ms-1. Two integrated position sensors control vertical and horizontal movement, while 2 intelligent controllers control cantilever arm and actuators without...Read More »
Power Chuck features quick change jaw set.
With ROTA THWplus, complete jaw set can be changed in less than 60 seconds with repeatability of less than 0.0005 in., eliminating need to re-bore jaws. Wedge-bar actuation system allows chuck to- offer large through holes with fast spindle speeds, coupled with Quick-Jaw-Change-System. Offered in 165, 185, 215, 260, and 315 sizes, ROTA THWplus is available with selection of modular sleeves- for...Read More »
Maintenance-Free Toolholders deliver concentric clamping.
Offering consistent run-out and repeat accuracy for roughing, drilling, reaming, and finishing, TENDO Series increases tool service life and prevents chipping at tool's cutting edge. TENDO E Compact uses hydraulic expansion technology and has- flexible clamping range. Featuring- integral one-piece design, Tendo Platinum hydraulic toolholders are manufactured from tool steel. TENDO Tech have...Read More »
ROTA NCR Precision 6-Jaw Compensation Chuck
The clamping of thin-walled and easily deformed components is challenging. With the ROTA NCR 6-jaw compensation chuck, SCHUNK offers a standard solution for this type of workpiece. SCHUNK has standardized the sizes of the ROTA NCR with diameters up to 1200 mm opening up the possibilities for precision workpiece clamping with large lathe chucks.- The ROTA NCR consists of a central chuck piston,...Read More »
OPS+ Collision and Overload Sensor
The OPS+ effectively protects the robot and end effector from being damaged during a crash.- The OPS+ will allow the EOAT to deflect and comply in the event of a crash.- At the same time, a mechanical switch will detect the deflection and send a signal to the robot controller, and then an E-stop can be issued.- This protects the system from the damage that would have otherwise occurred...Read More »
Rotary Feed-Through supports up to 26 electrical signals.
With DDF-I rotary feed-through, 13 of 26 electrical signals are used for valve actuation, while air and vacuum are supplied to actuators via fluid feed-through and slip ring contacts. Center bore enables feed-through of cables, liquids, workpieces, or use of camera. Product's ISO flange pattern connects device to different robots without adapter. Enabling rotation of last robot axis by over 360-Read More »
Hydraulic Toolholder allows milling, drilling, and reaming.
TENDO E compact hydraulic expansion toolholder transfers torques of up to 384 lb-ft at 20 mm clamping diameter, suiting use in high volume cutting applications. Unit features vibration damping and run out accuracy of less than 0.0001 in. at 2.5 times diameter to protect machine spindle from damage. Tools can be changed with Allen key. Common spindle connections such as HSK-A63, SK40, BT40, CAT40,...Read More »
Precision Toolholders boost performance via rigidity, strength.
Intended for milling, drilling, and reaming applications, TENDO Platinum is manufactured from tool steel, balanced to G2.5 at 25,000 rpm, and exceeds industry tolerance norms and material specifications. Brazing and hardening contributes to rigidity and durability, while concentric clamping promotes optimal tool performance. With precise run out accuracy ofRead More »
Universal Rotary Unit supports high-speed assembly.
With lightweight parts, SRU plus 20-S Module enables rotation times starting at 0.3 s and up to 3,700 cycles per hour. Patented shock absorbing system combines elastomer with oil-damped shock absorber. Arranged in stack, damping enables minimized cycle times and maximum number of cycles, as well as rotation of high mass inertias or loads.Read More »
Finding the Right Jaws on Your Computer, iPad, or iPhone
SCHUNK has two new programs to help users quickly find the right type of jaws for their chuck. The SCHUNK chuck jaw quick-finder makes tracking down the suitable standard chuck jaw sim-ple. By putting in the chuck manufacturer, type, size, and details, the users will receive a com-prehensive list of all relevant chuck jaws. The tool includes lathe chucks from Berg, Forkardt, Howa, Kitagawa, MMK...Read More »