SCHUNK

Morrisville, NC 27560

New 5-axis Vise with Integrated Elastomer Damping
KSX-C2 seamlessly fits into the modular system for high-efficient workpiece clamping. Achieves good results in terms of plane-parallelism and perpendicularity with its active jaw pull-down. Offered in four base body lengths such as 330, 430, 500, 630 and 800 mm.
Read More »
New SCHUNK ROTA-M Flex 2+2 Chuck Amounts to 5.1 mm up to 10 mm per Jaw
Chuck sizes 260 to 1200, achieve jaw strokes from 9.5 mm to 17.8 mm and high clamping forces from 100 kN to 180 kN. Equipped with grooves and fixed stops allowing the chuck to also be used as a vise. Stocked with a flexible serration (1.5 mm x 60° or 1/16“x 90°).
Read More »
New ADHESO Gripper Uses Intermolecularly Acting Van der Waals Forces
Allows gripping times of < 100 ms. Achieves repetitive positioning accuracies of < 0.01 mm. Can be used in conventional industrial environments, cleanrooms and vacuum environments for handling.
Read More »
New iTENDO Sensory Toolholder Comes with Integrated Display
Equipped with sensor, battery, and transmitting unit that records the data at the tool and transmits it wirelessly via Bluetooth. Suitable for the use of coolant and is designed for speeds of up to 10,000 RPM. Records metal cutting process, monitors previously defined exact limit values and enables real-time adaptive control of the speed of rotation and feed rate.
Read More »
New Clamping Module for Compact Applications in Metal Cutting Industry
VERO-S NSE mikro 49-13 is actuated via an axial piston and achieves high pull-down forces despite the compact dimensions. Combines compact dimensions, high pull-down and holding forces, a high dimensional stability and a high repeat accuracy of < 0.005 mm. Locking is done mechanically via a spring assembly, it is self-retaining and locks form-fit.
Read More »
New EGH Co-Act Gripper Comes with Integrated Status Display
Offers gripper movement with parallel kinematics for constant gripping force during the entire stroke. Features quick-release assembly lock and optional flexible gripper fingers. Controls via IO-Link and ideal for handling, assembly, and electronics industries.
Read More »
New KSX-C Clamping Vises from SCHUNK Comes with 5-Axis and Adjustable Center
Available in four base body lengths (330 mm, 430 mm, 500 mm, and 630 mm) and in two heights each (174 mm and 125 mm). Equipped with two jaws, which can be moved by a laser-etched ruler and offers ample power for a safe hold even with minimum clamping surfaces. Features 160° quick clamping in vibration resistant manner and at a high repeat accuracy.
Read More »
New iTENDO Hydraulic Expansion Toolholder Equipped with Sensor, Battery and Transmitting Unit
Monitors the machining process directly at the tool. Allows real-time control of the cutting parameters. Records the process directly in the tool, transmits the data wirelessly to a receiving unit in the machine room.
Read More »
Reduce Your Jaw Change-Over Time to 5 Seconds
SCHUNK PRONTO quick change jaw system could shave minutes off of your current set-up times, drastically improving your productivity. In addition to the time-saving benefits, there is also considerable versatility and extended clamping range to the PRONTO quick change system. The complete system is suitable for O.D. clamping of machined and finished parts and consists of support jaws and clamping...
Read More »
High Performance Toolholder for Micro Machining
Special consideration must be made for micro-machining, which is why SCHUNK is offering the TRIBOS-RM precision toolholder as the best solution for micro machining with the ISO interface. The one-piece, rotationally symmetric design ensures long life of the machine spindles and the complete transmission of power. Unlike heat shrink clamping, the TRIBOS-RM achieves steady tool clamping that will...
Read More »
New 5-axis Vise with Integrated Elastomer Damping
KSX-C2 seamlessly fits into the modular system for high-efficient workpiece clamping. Achieves good results in terms of plane-parallelism and perpendicularity with its active jaw pull-down. Offered in four base body lengths such as 330, 430, 500, 630 and 800 mm.
Read More »
New SCHUNK ROTA-M Flex 2+2 Chuck Amounts to 5.1 mm up to 10 mm per Jaw
Chuck sizes 260 to 1200, achieve jaw strokes from 9.5 mm to 17.8 mm and high clamping forces from 100 kN to 180 kN. Equipped with grooves and fixed stops allowing the chuck to also be used as a vise. Stocked with a flexible serration (1.5 mm x 60° or 1/16“x 90°).
Read More »
New ADHESO Gripper Uses Intermolecularly Acting Van der Waals Forces
Allows gripping times of < 100 ms. Achieves repetitive positioning accuracies of < 0.01 mm. Can be used in conventional industrial environments, cleanrooms and vacuum environments for handling.
Read More »
New iTENDO Sensory Toolholder Comes with Integrated Display
Equipped with sensor, battery, and transmitting unit that records the data at the tool and transmits it wirelessly via Bluetooth. Suitable for the use of coolant and is designed for speeds of up to 10,000 RPM. Records metal cutting process, monitors previously defined exact limit values and enables real-time adaptive control of the speed of rotation and feed rate.
Read More »SCHUNK Announces New Vice President of Toolholding and Workholding Sales
SCHUNK is proud to announce the promotion of Allan Logan to Vice President of Sales, Toolholding and Workholding. Allan has more than 20 years of territory sales and team management experience in the metalworking industry. He started his career in account management for cutting tools and abrasives before holding various roles as sales engineer, aerospace industry specialist, and regional sales...
Read More »SCHUNK Partners with JR Automation In Fight Against COVID-19
SCHUNK is proud to partner with JR Automation Technologies LLC to increase availability of N95 medical masks. N95 medical masks, critical in the fight against COVID-19, have become difficult to source as demand has surged. As states move toward re-opening, the country faces the challenge of protecting its essential workers and frontline healthcare professionals. As a result, it was vital that...
Read More »
New Clamping Module for Compact Applications in Metal Cutting Industry
VERO-S NSE mikro 49-13 is actuated via an axial piston and achieves high pull-down forces despite the compact dimensions. Combines compact dimensions, high pull-down and holding forces, a high dimensional stability and a high repeat accuracy of < 0.005 mm. Locking is done mechanically via a spring assembly, it is self-retaining and locks form-fit.
Read More »
New EGH Co-Act Gripper Comes with Integrated Status Display
Offers gripper movement with parallel kinematics for constant gripping force during the entire stroke. Features quick-release assembly lock and optional flexible gripper fingers. Controls via IO-Link and ideal for handling, assembly, and electronics industries.
Read More »
New KSX-C Clamping Vises from SCHUNK Comes with 5-Axis and Adjustable Center
Available in four base body lengths (330 mm, 430 mm, 500 mm, and 630 mm) and in two heights each (174 mm and 125 mm). Equipped with two jaws, which can be moved by a laser-etched ruler and offers ample power for a safe hold even with minimum clamping surfaces. Features 160° quick clamping in vibration resistant manner and at a high repeat accuracy.
Read More »Grippers Assembled in the USA
SCHUNK will now be assembling grippers in the US. SCHUNK completed a 40,000 square foot expansion in Morrisville, NC earlier this year, resulting in an additional 19,000 square feet of manufacturing space allowing increased capacity and additional product line assembly. Another 22,000 square feet of additional office and training space completed the expansion. The new facility, combined with...
Read More »