Princo Instruments, Inc.
Southampton, PA 18966
Transmitter is designed for OEM applications.
Suited for beverage bottling machines, car washing systems, and vending machines, model L2632 OEM NULL-KOTE(TM) transmitter can be customized to measure any material from low dielectric (insulating) products to conductive slurries. Advanced circuitry provides accurate readings even when conductive materials build up on sensing probe. It features -
Read More »Pressure Transmitters provide 0.25% accuracy.
Available in 19 pressure ranges from -14.5 to 5,800 psi, SmartPress Model LP-D pressure/liquid level transmitters feature 316 SS flush diaphragms and variety of process connections including 1 in. NPT and several Triclamp-® sizes. Two-wire, loop-powered units offer push button programming and can be supplied pre-calibrated. Provided in IP65/NEMA 4X housings, transmitters operate over temperature...
Read More »
Point Level Control features no-moving-part design.
Null-Kote(TM) L2000-OEM employs circuitry to cancel out any effects of coatings or material build-up on sensing probe. It includes 10 A relay, explosionproof/weatherproof NEMA 4 housing, 0-30 sec time delay, and high or low fail safe, as well as 316 stainless steel and Teflon-® sensing probe with temperature range of -300 to 500-
Read More »
Controller provides modular, remote automation solution.
TBOX-MS integrates telemetry, PLC automation, and 3 levels of TCP/IP Internet compatibility. Based on backplane rack architecture, unit accepts cards such as power supply, CPU, I/O, modems, serial ports, Ethernet, and GPS. TwinSoft(TM) configuration software contains tools to create telemetry functions, and PLC functions are programmable by ladder diagram, high-level Basic, or C. Internet...
Read More »
Open Channel Flowmeters suit narrow weirs and flumes.
SmartSonic(TM) Model L4660/OC Narrow-Beam Ultrasonic Flowmeters combine signal conditioner, microprocessor, and totalizer in single unit housed in NEMA 4X enclosure. Narrow Beam technology ignores baffles, uneven sidewalls, and other obstructions that interfere with other ultrasonic devices, allowing signals to penetrate gases, vapors, heavy fuming, and foams. Flowmeters include full temperature...
Read More »
Ultrasonic Level Transmitters are intrinsically safe.
SmartSonic(TM) L4660-SE/SG-300 2-wire loop-powered transmitters offer built-in temperature compensation and indication, open channel flow characterization, 32-point linearization, and intuitive setup. Signal processing software identifies and validates surface signal and provides agitator/stirrer filtering and dead band control. Narrow Beam Technology allows accuracy in narrow vessels and flumes...
Read More »
Level Transmitter employs SMT electronics.
Smart 2 Model L4620 provides 4-20 mA analog signal as well as digital FSK communications signal on same 2-wire signal loop. Based on RF impedance level sensing technology, transmitter provides level control of most non-coating water- or organic-based liquids and light bulk solids. One-piece unit is comprised of electronics and inert sensing probe. Configuration and calibration can be performed...
Read More »
Transmitters and Detectors suit sanitary applications.
Level transmitters and presence/absence detectors are offered with sensing probes approved by 3-A Sanitary Standards Symbol Administrative Council. Transmitters include L104 Series level transmitter probes with Tri-Clamp(TM) fittings in sizes from 1 to 4 in. with all wetted parts, either Teflon-® or Kynar covered. Also approved are Series L651/2 and L661/2 presence/absence-detector sensor...
Read More »
Transmitter is designed for OEM applications.
Suited for beverage bottling machines, car washing systems, and vending machines, model L2632 OEM NULL-KOTE(TM) transmitter can be customized to measure any material from low dielectric (insulating) products to conductive slurries. Advanced circuitry provides accurate readings even when conductive materials build up on sensing probe. It features -
Read More »Pressure Transmitters provide 0.25% accuracy.
Available in 19 pressure ranges from -14.5 to 5,800 psi, SmartPress Model LP-D pressure/liquid level transmitters feature 316 SS flush diaphragms and variety of process connections including 1 in. NPT and several Triclamp-® sizes. Two-wire, loop-powered units offer push button programming and can be supplied pre-calibrated. Provided in IP65/NEMA 4X housings, transmitters operate over temperature...
Read More »
Point Level Control features no-moving-part design.
Null-Kote(TM) L2000-OEM employs circuitry to cancel out any effects of coatings or material build-up on sensing probe. It includes 10 A relay, explosionproof/weatherproof NEMA 4 housing, 0-30 sec time delay, and high or low fail safe, as well as 316 stainless steel and Teflon-® sensing probe with temperature range of -300 to 500-
Read More »
Controller provides modular, remote automation solution.
TBOX-MS integrates telemetry, PLC automation, and 3 levels of TCP/IP Internet compatibility. Based on backplane rack architecture, unit accepts cards such as power supply, CPU, I/O, modems, serial ports, Ethernet, and GPS. TwinSoft(TM) configuration software contains tools to create telemetry functions, and PLC functions are programmable by ladder diagram, high-level Basic, or C. Internet...
Read More »
Open Channel Flowmeters suit narrow weirs and flumes.
SmartSonic(TM) Model L4660/OC Narrow-Beam Ultrasonic Flowmeters combine signal conditioner, microprocessor, and totalizer in single unit housed in NEMA 4X enclosure. Narrow Beam technology ignores baffles, uneven sidewalls, and other obstructions that interfere with other ultrasonic devices, allowing signals to penetrate gases, vapors, heavy fuming, and foams. Flowmeters include full temperature...
Read More »
Ultrasonic Level Transmitters are intrinsically safe.
SmartSonic(TM) L4660-SE/SG-300 2-wire loop-powered transmitters offer built-in temperature compensation and indication, open channel flow characterization, 32-point linearization, and intuitive setup. Signal processing software identifies and validates surface signal and provides agitator/stirrer filtering and dead band control. Narrow Beam Technology allows accuracy in narrow vessels and flumes...
Read More »
Level Transmitter employs SMT electronics.
Smart 2 Model L4620 provides 4-20 mA analog signal as well as digital FSK communications signal on same 2-wire signal loop. Based on RF impedance level sensing technology, transmitter provides level control of most non-coating water- or organic-based liquids and light bulk solids. One-piece unit is comprised of electronics and inert sensing probe. Configuration and calibration can be performed...
Read More »
Transmitters and Detectors suit sanitary applications.
Level transmitters and presence/absence detectors are offered with sensing probes approved by 3-A Sanitary Standards Symbol Administrative Council. Transmitters include L104 Series level transmitter probes with Tri-Clamp(TM) fittings in sizes from 1 to 4 in. with all wetted parts, either Teflon-® or Kynar covered. Also approved are Series L651/2 and L661/2 presence/absence-detector sensor...
Read More »