IMI Precision Engineering

Modular Valve Manifolds enable expansion in field.
Fluid & Gas Flow Equipment

Modular Valve Manifolds enable expansion in field.

Featuring modular design, VS Series enables expansion of single stations by up to 16 valves using plug-in PCB technology. Three sizes of plug-in sub-base valves are available with flows ranging from Cv = 0.52 up to 4.2. Manifolds come with 2 spool technologies: softseal spool for optimized flow rates, and glandless spool and sleeve, which delivers millions of cycles. Both can be incorporated in...

Read More »
Controls & Controllers

Integrated Valve and Actuator Control eliminates tubing.

CombiningÂ- cylinder, pilot and control valves, position sensors, and speed regulators in single unit, Integrated Valve and Actuator Control eliminates tubing and remote valve islands typical of pneumatic operations. Cleanline version, with switches and valve inside smooth casing, features IP67 rating, making it suitable for operations such as food or beverage handling where frequent...

Read More »
Construction Equipment and Supplies

Norgren Quality and Pricing

ON TARGET QUALITY & PRICING Our pneumatic actuators offer a wide range of sizes and options, aggressive pricing and Norgren quality. ROUNDLINE PLUS Norgren has greatly expanded our stainless steel round body pneumatic cylinders to include a full range of bore sizes, mountings, and options. Fully interchangeable with other leading brands, the laser etched part number enhances the products to...

Read More »
Pneumatic Actuator is offered in 7 bore sizes.
Mechanical Power Transmission

Pneumatic Actuator is offered in 7 bore sizes.

RT Thruster is offered in 7 bore sizes ranging from 9/16-3 in. and features both composite bearings and precision recirculating ball bearings. It incorporates Roundline Plus cylinder and robust aluminum slide body for defined load guiding and maximum torque resistance. Array of options, including external shock absorbers, stroke adjust collars, and bumpers, are offered, along with Ecology seals...

Read More »
Fluid & Gas Flow Equipment

Valves can be expanded to 16 stations.

Model VS45 features plug-in subbase manifold that is fully modular and is offered in 3/8, Â-½, and ¾ in. port sizes. Unit offers pressure capabilities of vacuum up to 232 psi and flow up to 4.20 Cv. Suited for heavy industry applications, valves include both softseal and glandless spool technologies.

Read More »
Fluid & Gas Flow Equipment

Plastic Diaphragm Valves target water purification market.

Approved by NSF 42 and NSF 61 section 9 for drinking water systems, 84080 Series can also be used with demineralized water and slightly acidic fluids. Units feature stainless steel jacketed Â-½ and ¾ in. NPT threads, water-hammer free design, and monolithically injection molded EPDM diaphragm. Actuated by solenoids from Click-On® coil system, valves are rated for pressures from...

Read More »
NFPA Air Cylinders provides mounting flexibility.
Construction Equipment and Supplies

NFPA Air Cylinders provides mounting flexibility.

Along with magnetic piston for position sensing, NEN Series features adjustable cushions, low-friction nitrile seals, and Teflon wear band on piston. Viton seals are available, and cylinders come standard with sleeve-nut construction with NFPA MS4 bottom-tapped mounting. For mounting flexibility, add-a-mount option permits changes, additions, and reorientation of NFPA MF1/MF2/MP1/MP2 mounts at...

Read More »
Pressure Switches typically provide 100 million cycles.
Electrical Equipment & Systems

Pressure Switches typically provide 100 million cycles.

Utilized in pneumatic and hydraulic environments, Herion 33D Series is available in ranges from vacuum to 10,000 psi and is fully programmable for NO, NC, or window mode operation. Switching status is indicated by backlit real-time LED display and features selectable pressure units for global use. Designed with stainless steel wetted parts, switches include programmable delays, LED status...

Read More »
Fluid & Gas Flow Equipment

Pneumatic Valve Islands are compatible with distributed I/O.

Featuring M23 19-pin connector, Series VS18/VS26 addresses CNOMO standard E03.62.530.N within European automotive industry. Metal connector is suitable for 24 Vdc and 115 Vac valve islands and multi-pole valve islands with M23 connector. Compatibility with FD67 fieldbus I/O system enables direct control of islands from FD67 nodes as part of distributed system. Sandwich plates with additional...

Read More »
Company News

Analytical Flow Products to Join Norgren in IMI Fluid Power Group

Norgren parent company IMI plc adds Analytical Flow Products’ (AFP) range ofÂ- precision fluid control products to Norgren portfolio LITTLETON, Colo. – IMI plc (“IMI”), the international engineering solutions group, is enhancing the capabilities of its fluid power subsidiary, Norgren, through the acquisition of Analytical Flow Products (AFP). Founded in Quebec in 2007 by Yves...

Read More »
Modular Valve Manifolds enable expansion in field.
Fluid & Gas Flow Equipment

Modular Valve Manifolds enable expansion in field.

Featuring modular design, VS Series enables expansion of single stations by up to 16 valves using plug-in PCB technology. Three sizes of plug-in sub-base valves are available with flows ranging from Cv = 0.52 up to 4.2. Manifolds come with 2 spool technologies: softseal spool for optimized flow rates, and glandless spool and sleeve, which delivers millions of cycles. Both can be incorporated in...

Read More »
Controls & Controllers

Integrated Valve and Actuator Control eliminates tubing.

CombiningÂ- cylinder, pilot and control valves, position sensors, and speed regulators in single unit, Integrated Valve and Actuator Control eliminates tubing and remote valve islands typical of pneumatic operations. Cleanline version, with switches and valve inside smooth casing, features IP67 rating, making it suitable for operations such as food or beverage handling where frequent...

Read More »
Construction Equipment and Supplies

Norgren Quality and Pricing

ON TARGET QUALITY & PRICING Our pneumatic actuators offer a wide range of sizes and options, aggressive pricing and Norgren quality. ROUNDLINE PLUS Norgren has greatly expanded our stainless steel round body pneumatic cylinders to include a full range of bore sizes, mountings, and options. Fully interchangeable with other leading brands, the laser etched part number enhances the products to...

Read More »
Pneumatic Actuator is offered in 7 bore sizes.
Mechanical Power Transmission

Pneumatic Actuator is offered in 7 bore sizes.

RT Thruster is offered in 7 bore sizes ranging from 9/16-3 in. and features both composite bearings and precision recirculating ball bearings. It incorporates Roundline Plus cylinder and robust aluminum slide body for defined load guiding and maximum torque resistance. Array of options, including external shock absorbers, stroke adjust collars, and bumpers, are offered, along with Ecology seals...

Read More »
Fluid & Gas Flow Equipment

Valves can be expanded to 16 stations.

Model VS45 features plug-in subbase manifold that is fully modular and is offered in 3/8, Â-½, and ¾ in. port sizes. Unit offers pressure capabilities of vacuum up to 232 psi and flow up to 4.20 Cv. Suited for heavy industry applications, valves include both softseal and glandless spool technologies.

Read More »
Fluid & Gas Flow Equipment

Plastic Diaphragm Valves target water purification market.

Approved by NSF 42 and NSF 61 section 9 for drinking water systems, 84080 Series can also be used with demineralized water and slightly acidic fluids. Units feature stainless steel jacketed Â-½ and ¾ in. NPT threads, water-hammer free design, and monolithically injection molded EPDM diaphragm. Actuated by solenoids from Click-On® coil system, valves are rated for pressures from...

Read More »
NFPA Air Cylinders provides mounting flexibility.
Construction Equipment and Supplies

NFPA Air Cylinders provides mounting flexibility.

Along with magnetic piston for position sensing, NEN Series features adjustable cushions, low-friction nitrile seals, and Teflon wear band on piston. Viton seals are available, and cylinders come standard with sleeve-nut construction with NFPA MS4 bottom-tapped mounting. For mounting flexibility, add-a-mount option permits changes, additions, and reorientation of NFPA MF1/MF2/MP1/MP2 mounts at...

Read More »
Company News

Norgren Test Drive offers Customers up to $1,000 in Free Products

LITTLETON, COLO., January 30, 2007 - Norgren, the pneumatic motion and fluid control specialist, now offers customers the opportunity to test drive" up to $1,000 worth of its products for free. Customers can qualify to test drive free Norgren products by visiting norgren.com/testdrive to complete a brief form or by contacting a Norgren representative at 1-800-766-6674. Available to qualified new...

Read More »
Pressure Switches typically provide 100 million cycles.
Electrical Equipment & Systems

Pressure Switches typically provide 100 million cycles.

Utilized in pneumatic and hydraulic environments, Herion 33D Series is available in ranges from vacuum to 10,000 psi and is fully programmable for NO, NC, or window mode operation. Switching status is indicated by backlit real-time LED display and features selectable pressure units for global use. Designed with stainless steel wetted parts, switches include programmable delays, LED status...

Read More »

All Topics