ADLINK Technology, Inc.
#110
San Jose, CA 95138
PXI Module integrates PXI platforms in DAQ systems.
PXI Starter combines 3U, 8-slot chassis featuring 7 PXI peripheral slots and 400 W ATX power supply with PCI-PXI extension kit. Power supply, temperature, and cooling fans are monitored by built-in alarm in chassis. Warning LED and alarm are activated if failure is detected. PCI-PXI Extension Kits work as transparent PCI-PCI bridge register set and provide direct control of PXIS-2630 chassis from...
Read More »
Switch Modules suit measurement and automation applications.
PXI-7900 Series switch modules are PXI Rev. 2.1 and PICMG 2.1 R 2.0 CompactPCI hot swap compliant and can be used in either PXI or CompactPCI systems. Series includes PXI-7901 16-ch general-purpose SPDT relay module, PXI-7921 24-ch 2-wire multiplexer module, and PXI-7931 4 x 8 2-wire matrix module. Each switch module series features distinct functionality to cover needs of variety of applications...
Read More »
PC/104 Module delivers 4 serial ports, video, and Ethernet.
Designed as migration product, CoreModule 420 PC/104 SBC suits space-constrained embedded applications that require 4 serial ports, 10/100BaseT Ethernet, and video on one board. I/O addresses and IRQ mappings allow unit to be configured to match setup of legacy solutions. Based on STPC Atlas microprocessor running at 133 MHz, SBC provides 8 general-purpose I/O pins, EPP/ECP parallel port, one USB...
Read More »
Single Board Computers offer I/O expansion capabilities.
MiniModule(TM) A2D, MiniModule FPGA, MiniModule GPIO, and MiniModule UART, for Little Board(TM) and CoreModule(TM) SBCs, support I/O requirements for up to 150 configurable input/output signals. MiniModules plug on top of CPUs and SBCs using PCI and ISA buses in PC/104 and PC/104-Plus connectors, yet plug in horizontally to reduce height and mounting requirements of end systems.
Read More »
Processor is based on Intel networks.
cPCI-6240, 6U CompactPCI board, supports Processor PMC site for additional control plane processing, PCI Telecom Mezzanine/Carrier Card site for quad OC-3 or OC-12 interfaces, and 4 additional gigabit Ethernet channels. Unit includes 600 MHz XScale(TM) core and eight 600 MHz microengine processors for programming at up to OC-12 line speeds. Processor supports 512 Mbytes DDR DRAM and 4 Mbytes QDR...
Read More »SBC acts as server/multiple device controller.
Model cPCI-6820, 6U CompactPCI SBC supports IntelÃ-® PentiumÃ-® III processors up to 1 GHz and ECC memory up to 2 GB. Additional offerings include dual Gigabit Ethernet controllers, PMC slots, onboard 2.5 in. IDE bay, PICMG 2.16 packet switching backplane compliance, and PICMG 2.9 system management capabilities. I/O capability may be expanded by addition of rear transition module.
Read More »
Instrument Chassis System retains interoperability with CompactPCI.
Series cPXIS-2100 combines 850 MHz Pentium III processing and Ethernet/USB connectivity into 19 in., rack-mount, portable or benchtop chassis-mounting unit. Chassis offers 6.4 in. TFT LCD, system controller, and seven PXI/CompactPCI I/O slots. Modules available for series offer simultaneous sampling, bundled software, and drivers for Matlab, LabView, DasyLab, and Linux systems.
Read More »
Motion Control Card controls up to 48 motors.
Model cPCI-8168, 6U CompactPCI, 8-axes motion control card can integrate into 6 systems cards. Hot swappable features allow maintenance without affecting live systems. It offers differential input/output signals, command output options (DIR/OUT and CW/CCW), and various operation modes. Additional offerings include incremental encoder interface, 28-bit counter, and software drivers. Card is...
Read More »Data Acquisition Card suits instrumentation market.
Model PXI-2010 4 CH simultaneous 2MS/s A/D and 2 CH 1MS/s D/A multifunction card provides simultaneous operation, immunity to noise, analog and digital triggering, and automatic calibration. Using carrier and daughter modular design concept, it provides trigger and clock signals on J2 bus of CompactPCI. Multiple card synchronization is accomplished via signal bus for trigger and clock...
Read More »
Ethernet Cards offer bypass capability.
PCI-8214 and PCI-8213 2/4 port Ethernet cards run on 64-bit, 33/66 MHz PCI bus, and are also compatible with 32-bit PCI slots. Bypass capability is designed for network monitoring and control. When system crashes, unexpected power-down, or on-board watchdog timer has timed out, on-board relays will cross-link channel 1 and 2. Fail-safe data transmission is achieved by linking inbound and outbound...
Read More »