DeWalt Industrial Tool Co.
Baltimore, MD 21286
Share:
Carbide Drill Bits are designed for durability, efficiency.
Ranging from 5/32-Ã-½ in. in size, SOLID ROCK CARBIDE(TM) SDS Plus drill bits (DW5501-DW5541) are used for drilling holes in hard concrete, reinforced concrete, block, and pan decking. Bonding system, used to affix tip to flute, promotes durability and bit life in tough applications. Featuring full head, 4-cutter design, bits also have 4 flutes to optimize debris removal and increase drilling...
Read More »Coil Framing Nailer handles wide range of nail sizes.
Capable of driving 3 in. nail into engineered lumber, 8 lb D51855 can be used for structural framing, floor decking, roof decking, truss installation, furring strips, wall sheathing, pallet and crate manufacturing, and fencing. It handles 15Ã-
Read More »Electric-Wheeled Compressors have heavy-duty design.
Models D55171/D55371 are equipped with sealed-lube SL2 pump that allows sufficient lubrication without use of oil, while D55394 features cast iron W-pump with 3-piece oil control rings. Each unit is made portable by 12 in. semi-pneumatic, puncture-resistant tires and equipped with roll cage to protect main components. Working at 74 dBA, 1.6 hp D55171/D55371 operate at 175 max psi and 4.6 scfm @...
Read More »Gas-Wheeled Portable Compressors suit construction jobs.
Models D55672 and D55684 have forced-air cooling system, 3-piece oil control rings, and low-oil sensor with automatic shutoff. Model D55684 has roll cage that protects key components, while D55690 and D55695 have metal panel to protect controls and pump. These heavy-duty compressors, powered by 6.5 or 9 hp engines, are built with cast iron DEWALT pumps that produce 150 max psi. Battery start...
Read More »Corded Drills deliver 0-2,500 rpm.
Available with mid-handle grip or traditional pistol grip, 3/8 in. Corded Drills enable professional contractors to complete heavy-duty applications. Model DWD115K features 8.0 A of power, while Models DWD110K and DWD112 offer 7.0 A. All-metal keyless ratcheting chuck on Models DWD115K and DWD112 optimize bit retention. All models weigh 4.1 lb and come with anti-slip comfort grip.
Read More »Compound Miter Saw features 15 A motor.
Model DW713 10 in. miter saw has machined base fence positioned perpendicular to base and adjustable SS miter detent plate. Able to cut molding, sheet materials, lumber, veneer, and nonferrous metal, saw vertically cuts up to 3Ã-½ in. base molding and 4Ã-½ in. crown molding against fence, and horizontally cuts 2 x 6 in. material at 0Ã-
Read More »Cut-Off Tool comes with 36 V battery.
Suited for maintenance and repair operations, Model DC415KL can cut door hardware and locks, old anchors, tile, electrical cable, and rusted fasteners. It can also be used to finish ornamental and handrail welds, and prepare for several applications such as rail cable repair, remote cutting and welding, and mounting tabs. Features include Quick-Change wheel release system, protected spindle lock...
Read More »Chop Saw features keyless blade change system.
Equipped with 15 A, 5.5 max motor HP, 14 in. model D28715 chop saw cuts 4Ã-½ x 4Ã-½ in. square pipe, 4Ã-½ x 6Ã-½ in. rectangular pipe, full steel bundles, and up to 5 in. round pipe. Saw has stamped steel base, allowing welding of out-feed tables to base of tool to support materials being cut, and pivot bracket for durability. Weighing 39 lb, unit includes heavy-duty lock-down...
Read More »Pavement Breaker is designed for minimal vibration.
Electric concrete breaker, D25980K, employs metal, automotive-style seals on ram and piston to prevent dust and debris from entering unit and extend product life. Hammer mechanism delivers 61 lb-ft of impact energy, and SHOCKS - Active Vibration Control combines shock-mounted, rubber-coated handles with counter balance mechanism located in tool's barrel to reduce vibration to 6.6 m/secÃ-²....
Read More »Worklight/Charger includes GFCI protection.
Combining area light, dual-port battery charger, and 3 GFCI power outlets, Cordless/Corded Model DC022 uses 38 W fluorescent bulb that runs on 12-18 V batteries or ac power. Charger can charge two 7.2-18 V batteries in 1 hour or less. Green LED indicator on top of charger housing illuminates to signal ac power and GFCI protection for entire unit. Rotating over 180Ã-
Read More »Carbide Drill Bits are designed for durability, efficiency.
Ranging from 5/32-Ã-½ in. in size, SOLID ROCK CARBIDE(TM) SDS Plus drill bits (DW5501-DW5541) are used for drilling holes in hard concrete, reinforced concrete, block, and pan decking. Bonding system, used to affix tip to flute, promotes durability and bit life in tough applications. Featuring full head, 4-cutter design, bits also have 4 flutes to optimize debris removal and increase drilling...
Read More »Coil Framing Nailer handles wide range of nail sizes.
Capable of driving 3 in. nail into engineered lumber, 8 lb D51855 can be used for structural framing, floor decking, roof decking, truss installation, furring strips, wall sheathing, pallet and crate manufacturing, and fencing. It handles 15Ã-
Read More »Electric-Wheeled Compressors have heavy-duty design.
Models D55171/D55371 are equipped with sealed-lube SL2 pump that allows sufficient lubrication without use of oil, while D55394 features cast iron W-pump with 3-piece oil control rings. Each unit is made portable by 12 in. semi-pneumatic, puncture-resistant tires and equipped with roll cage to protect main components. Working at 74 dBA, 1.6 hp D55171/D55371 operate at 175 max psi and 4.6 scfm @...
Read More »Gas-Wheeled Portable Compressors suit construction jobs.
Models D55672 and D55684 have forced-air cooling system, 3-piece oil control rings, and low-oil sensor with automatic shutoff. Model D55684 has roll cage that protects key components, while D55690 and D55695 have metal panel to protect controls and pump. These heavy-duty compressors, powered by 6.5 or 9 hp engines, are built with cast iron DEWALT pumps that produce 150 max psi. Battery start...
Read More »Corded Drills deliver 0-2,500 rpm.
Available with mid-handle grip or traditional pistol grip, 3/8 in. Corded Drills enable professional contractors to complete heavy-duty applications. Model DWD115K features 8.0 A of power, while Models DWD110K and DWD112 offer 7.0 A. All-metal keyless ratcheting chuck on Models DWD115K and DWD112 optimize bit retention. All models weigh 4.1 lb and come with anti-slip comfort grip.
Read More »Compound Miter Saw features 15 A motor.
Model DW713 10 in. miter saw has machined base fence positioned perpendicular to base and adjustable SS miter detent plate. Able to cut molding, sheet materials, lumber, veneer, and nonferrous metal, saw vertically cuts up to 3Ã-½ in. base molding and 4Ã-½ in. crown molding against fence, and horizontally cuts 2 x 6 in. material at 0Ã-
Read More »Cut-Off Tool comes with 36 V battery.
Suited for maintenance and repair operations, Model DC415KL can cut door hardware and locks, old anchors, tile, electrical cable, and rusted fasteners. It can also be used to finish ornamental and handrail welds, and prepare for several applications such as rail cable repair, remote cutting and welding, and mounting tabs. Features include Quick-Change wheel release system, protected spindle lock...
Read More »Chop Saw features keyless blade change system.
Equipped with 15 A, 5.5 max motor HP, 14 in. model D28715 chop saw cuts 4Ã-½ x 4Ã-½ in. square pipe, 4Ã-½ x 6Ã-½ in. rectangular pipe, full steel bundles, and up to 5 in. round pipe. Saw has stamped steel base, allowing welding of out-feed tables to base of tool to support materials being cut, and pivot bracket for durability. Weighing 39 lb, unit includes heavy-duty lock-down...
Read More »Pavement Breaker is designed for minimal vibration.
Electric concrete breaker, D25980K, employs metal, automotive-style seals on ram and piston to prevent dust and debris from entering unit and extend product life. Hammer mechanism delivers 61 lb-ft of impact energy, and SHOCKS - Active Vibration Control combines shock-mounted, rubber-coated handles with counter balance mechanism located in tool's barrel to reduce vibration to 6.6 m/secÃ-²....
Read More »Worklight/Charger includes GFCI protection.
Combining area light, dual-port battery charger, and 3 GFCI power outlets, Cordless/Corded Model DC022 uses 38 W fluorescent bulb that runs on 12-18 V batteries or ac power. Charger can charge two 7.2-18 V batteries in 1 hour or less. Green LED indicator on top of charger housing illuminates to signal ac power and GFCI protection for entire unit. Rotating over 180Ã-
Read More »