LMT USA Inc.

Thread Rolling Heads have pre-synchronized design.
Architectural & Civil Engineering Products

Thread Rolling Heads have pre-synchronized design.

Offered in T120F, T160F, T220F and T350F models, Tangential Thread Rolling Heads set up with no roll timing and feature 10 min thread roll changeout. Symmetrical roller repositioning is performed with central setting screw, away from rolling system. Accommodating thread diameters from 5/64-2 in., products allow for adjustment from coarse to fine and extra fine pitch threads. Heads feature carbide...

Read More »
Thread Rolling Heads have pre-synchronized design.
Architectural & Civil Engineering Products

Thread Rolling Heads have pre-synchronized design.

Offered in T120F, T160F, T220F and T350F models, Tangential Thread Rolling Heads set up with no roll timing and feature 10 min thread roll changeout. Symmetrical roller repositioning is performed with central setting screw, away from rolling system. Accommodating thread diameters from 5/64-2 in., products allow for adjustment from coarse to fine and extra fine pitch threads. Heads feature carbide...

Read More »
Single Blade Reamers offer cutting and reaming capabilities.
Machinery & Machining Tools

Single Blade Reamers offer cutting and reaming capabilities.

Series SBR features fine radial adjustment for hole accuracy and compensation after regrinding. Two-point cutter clamping ensures precise support for cutting inserts. In addition to extra-wide guide strips consisting of ultra-fine grit carbide, reamers come equipped with coolant valve, making machining of blind- and through-holes possible with one tool. Internal coolant supply can be controlled...

Read More »
Single Blade Reamers offer cutting and reaming capabilities.
Machinery & Machining Tools

Single Blade Reamers offer cutting and reaming capabilities.

Series SBR features fine radial adjustment for hole accuracy and compensation after regrinding. Two-point cutter clamping ensures precise support for cutting inserts. In addition to extra-wide guide strips consisting of ultra-fine grit carbide, reamers come equipped with coolant valve, making machining of blind- and through-holes possible with one tool. Internal coolant supply can be controlled...

Read More »
Solid Carbide Roughing End Mill suits die and mold steels.
Laboratory and Research Supplies and Equipment

Solid Carbide Roughing End Mill suits die and mold steels.

In roughing and semi-finishing operations, HSC Feed operates with chip loads up to .031 in. per tooth and cutting speeds over 650 sfm. Product combines sub-micrograin substrate and proprietary AL2 plus PVD titanium aluminum nitride coating for wear-resistance and toughness. Run at table feeds exceeding 500 ipm, product performs high-feed milling of materials with hardness up to 60 Rc in addition...

Read More »
Solid Carbide Roughing End Mill suits die and mold steels.
Laboratory and Research Supplies and Equipment

Solid Carbide Roughing End Mill suits die and mold steels.

In roughing and semi-finishing operations, HSC Feed operates with chip loads up to .031 in. per tooth and cutting speeds over 650 sfm. Product combines sub-micrograin substrate and proprietary AL2 plus PVD titanium aluminum nitride coating for wear-resistance and toughness. Run at table feeds exceeding 500 ipm, product performs high-feed milling of materials with hardness up to 60 Rc in addition...

Read More »
Helical Ball Nose Insert reduces vibration when cutting.
Construction Equipment and Supplies

Helical Ball Nose Insert reduces vibration when cutting.

Designed for use on complex contoured workpieces, WPR-D Insert has free cutting geometry and helical cutting edge that results in incremental entry of cutter, reducing vibration for soft, peeling cut. Due to penetration, cutting edges are always under load for increased stability and further reduced vibration. Equal cutting forces enable milling operations with greater chipping depth and higher...

Read More »
Helical Ball Nose Insert reduces vibration when cutting.
Construction Equipment and Supplies

Helical Ball Nose Insert reduces vibration when cutting.

Designed for use on complex contoured workpieces, WPR-D Insert has free cutting geometry and helical cutting edge that results in incremental entry of cutter, reducing vibration for soft, peeling cut. Due to penetration, cutting edges are always under load for increased stability and further reduced vibration. Equal cutting forces enable milling operations with greater chipping depth and higher...

Read More »
Company News

LMT Opens Automotive Support Center for North America In Detroit

New center provides engineering, service and tool management support / High-speed production facility at LMT company Onsrud Auburn Hills, Michigan/Oberkochen, Germany (June 28, 2006) On June 8, 2006 the Leitz Metalworking Technology (LMT) Group celebrated the opening of their Automotive Support Center (ASC) for the North American Automotive industry in Auburn Hills/Detroit. The Automotive Support...

Read More »
Company News

LMT Opens Automotive Support Center for North America In Detroit

New center provides engineering, service and tool management support / High-speed production facility at LMT company Onsrud Auburn Hills, Michigan/Oberkochen, Germany (June 28, 2006) On June 8, 2006 the Leitz Metalworking Technology (LMT) Group celebrated the opening of their Automotive Support Center (ASC) for the North American Automotive industry in Auburn Hills/Detroit. The Automotive Support...

Read More »
Company News

Fette's High Quality Hobs are Now Made In the U.S.A.

Cleveland, OH - (June 21, 2006) With the establishment of a new LMT U.S. hob manufacturing and service facility in the midwest, customers can expect the same Fette world-class hobs to be precision-manufactured for their specific and extreme application demands - now in Libertyville, IL. Featuring the finest base materials, unique tooth geometries and Fette ingenuity, Fette hobs offer unparalleled...

Read More »
Company News

Fette's High Quality Hobs are Now Made In the U.S.A.

Cleveland, OH - (June 21, 2006) With the establishment of a new LMT U.S. hob manufacturing and service facility in the midwest, customers can expect the same Fette world-class hobs to be precision-manufactured for their specific and extreme application demands - now in Libertyville, IL. Featuring the finest base materials, unique tooth geometries and Fette ingenuity, Fette hobs offer unparalleled...

Read More »
Company News

LMT Offers Customers Chance To Earn Free Induction Shrink-Fit Unit With LMT-FETTE Tooling And Toolholder Purchases

Cleveland, OH - (February 24, 2006) LMT-FETTE, INC. is rewarding its frequent tooling and toolholder customers with the opportunity to receive a new Induction Shrink-Fit Unit free. For a 24-month period, customers can apply 5% of their LMT tooling and toolholder purchases toward the cost of a new Shrink-Fit Unit. During that time, customers are offered the unit interest-free". Based on LMT-Fette...

Read More »
Company News

LMT Offers Customers Chance To Earn Free Induction Shrink-Fit Unit With LMT-FETTE Tooling And Toolholder Purchases

Cleveland, OH - (February 24, 2006) LMT-FETTE, INC. is rewarding its frequent tooling and toolholder customers with the opportunity to receive a new Induction Shrink-Fit Unit free. For a 24-month period, customers can apply 5% of their LMT tooling and toolholder purchases toward the cost of a new Shrink-Fit Unit. During that time, customers are offered the unit interest-free". Based on LMT-Fette...

Read More »
Thread Rolling Heads have pre-synchronized design.
Architectural & Civil Engineering Products

Thread Rolling Heads have pre-synchronized design.

Offered in T120F, T160F, T220F and T350F models, Tangential Thread Rolling Heads set up with no roll timing and feature 10 min thread roll changeout. Symmetrical roller repositioning is performed with central setting screw, away from rolling system. Accommodating thread diameters from 5/64-2 in., products allow for adjustment from coarse to fine and extra fine pitch threads. Heads feature carbide...

Read More »
Thread Rolling Heads have pre-synchronized design.
Architectural & Civil Engineering Products

Thread Rolling Heads have pre-synchronized design.

Offered in T120F, T160F, T220F and T350F models, Tangential Thread Rolling Heads set up with no roll timing and feature 10 min thread roll changeout. Symmetrical roller repositioning is performed with central setting screw, away from rolling system. Accommodating thread diameters from 5/64-2 in., products allow for adjustment from coarse to fine and extra fine pitch threads. Heads feature carbide...

Read More »

All Topics