Exair Corporation

Communication Systems & Equipment

NEMA 12 Cabinet Coolers fit in tight spaces.

Side Mount Kits make mounting of a NEMA 12 Cabinet Cooler possible when electrical enclosure has limited space on top or side. Cabinet Cooler converts compressed air to 20°F without refrigerants or CFCs and circulates air through enclosure to eliminate high temperature malfunction. Cooling capacities up to 5,600 BTU/hr are available. Side Mount Kits maintain NEMA 12 rating of large and...

Read More »

Air Knife features energy-efficient design.

Suited for parts, webs, and conveyors, 54 in. Super Air Knife produces laminar sheet of airflow to blowoff, dry, or cool wide surfaces. It entrains 40 parts room air to 1 part compressed air and at 80 psig, produces sound level of 77 dBA. With 1.75 x 1.44 in. profile, it has inlets on each end and bottom for mounting in tight spaces. Maintenance-free unit is available from 3-54 in. and is...

Read More »
Fluid & Gas Flow Equipment

Air Nozzle delivers precision blowoff in tight spaces.

Measuring 0.78 in. long x 0.25 in. dia, Nano Super Air Nozzle(TM) Model 1110SS features Type 316 SS construction suitable for blowoff, cooling, and drying applications. Unit provides narrowly focused air pattern that measures 1.5 in. dia when positioned 6 in. away from target surface. Blowing force of 8.1 oz is achieved with air consumption of 8.3 scfm at 80 psig. Since airflow cannot be blocked,...

Read More »
HVAC

Static Eliminator neutralizes and cleans wide surfaces.

Using 8.7 scfm of compressed air at 5 psig, 48 in. Super Ion Air Knife neutralizes static electricity while blowing away dust and particulates from printed surfaces, paper, plastics, and 3D shapes. Electrically powered static control bar fills uniform sheet of air with high concentration of positive and negative ions, cleaning up to 20 ft away. Force can be adjusted from blast to breeze, and...

Read More »
Fluid & Gas Flow Equipment

Flat Air Nozzle provides adjustable force.

Available in zinc aluminum alloy or Type 316 SS, High Power Super Air Nozzle produces flat 2 in. wide airstream with blowing force of 2.2 lb when mounted 12 in. from target. Air is released through .025 in. gap opening that is set with stainless steel shim positioned between body and removable cap. Force and flow may be adjusted by installing different shim thicknesses. Consuming 37 scfm at 80...

Read More »
Explosives, Armaments, and Weaponry

Safety Air Gun provides force of 13 oz to 3.3 lb.

Featuring cast aluminum body and ergonomic composite rubber grip, Heavy Duty Safety Air Gun safely removes chips, dust, and other contaminants from products, machinery, and work surfaces. Unit uses 3/8 NPT compressed air inlet to maximize airflow available to Super Air Nozzle. Airflow cannot be blocked, which complies with OSHA standards. Providing reach for areas not easily accessible, aluminum...

Read More »
Cleaning Products & Equipment

Air Dryer resists corrosion and high temperatures.

Featuring split design that can be clamped around continuously moving material such as pipe, hose, cable, wire, and extruded shapes, stainless steel Super Air Wipe(TM) produces 360° airstream that can blow off, dry, clean, or cool material passing through center. Air velocity can be varied with instant on/off control, and additional shims can be installed if more blowoff force is required....

Read More »
Machinery & Machining Tools

Air Knife cleans, drys, or cools parts, webs, or conveyors.

Directing compressed airflow to precise slotted orifice, 48 in. Super Air Knife creates uniform sheet of air across entire length that immediately pulls in surrounding room air. Air amplification ratios of 40:1 are produced. At 80 psig, sound level is just 69 dBA. Compressed air inlets are provided on each end and bottom of Super Air Knife to facilitate mounting. Multiple units can be mounted end...

Read More »
Electronic Components & Devices

Vortex Tubes are suited for high-temperature applications.

High Temperature Vortex Tubes convert ordinary supply of compressed air into one hot stream and one cold stream for spot cooling applications in environments up to 392°F. Compressed air is sole source of power, eliminating use of chemicals and refrigerants, and cold air temperatures are adjustable from -50°F to ambient. With cooling capacities of 135-10,200 BTU/hr, stainless steel...

Read More »
Fluid & Gas Flow Equipment

Mufflers provide noise reduction up to 35 dBA.

Available in 1/8-1 in. NPT sizes, Reclassifying Mufflers help companies meet EU noise directive (86/188/EEC) and OSHA standard 29 CFR-1910.95 for safe noise levels below 90 dBA. They can be installed directly into exhaust port of cylinders, valves, and other air powered equipment to reduce work area noise and harmful oil mist. Wrap design of removable element removes oil mist contamination of...

Read More »

All Topics