W .R. Meadows, Inc.
Hampshire, IL 60140
Underslab Vapor Barrier protects indoor environment.
Featuring polyolefin-based resin/chemical technology, PERMINATORÃ-® helps minimize penetration of moisture and water vapor through slab into structure, thereby helping to reduce fungus, mildew, and mold growth. Product also helps prevent radon gas from entering structure. Available in 10 and 15 mil thicknesses in 200 ft long rolls, PERMINATOR helps meet and maintain maximum slab moisture...
Read More »
Expansion Joint Filler features Green design.
Composed of 100% recycled synthetic rubber, ECO-JOINT is flexible, chemical-resistant, and UV-stable. It is compatible with most hot and cold joint sealants and will not deform, twist, or break with normal handling. Suited for both interior and exterior environments, ECO-JOINT acts as bond breaker and contains no asphalt. Applications include roadways, airport runways, sidewalks, pavement patch...
Read More »Admixture reduces mortar and concrete freeze.
Recommended for use during cool and cold weather, HYDRASET-FREEÃ-® non-chloride concrete set accelerator speeds construction by shortening initial set and curing time. Workability and strength are obtained when temps are in 50-65Ã-
Read More »Roof Traffic Pads provide impact-absorbing walkway.
Providing designated safe area on which to walk, WHITEWALK roof traffic pads reflect heat and help assure safe footing. White granular surface provides obvious walkway for service routes to equipment, as well as traffic paths under and around signs and displays. WHITEWALK is compatible with fiberglass mesh, asphaltic coatings, asphalt-saturated felts, butyl rubber, neoprene, EPDM, and most PVC...
Read More »
Transparent Liquid Sealant protects decorative concrete.
Non-yellowing, polymer-based DECRA-SEAL(TM) W/B is formulated to seal and protect decorative colored concrete by producing hard, flexible, clear film. Used on any interior/exterior concrete surface, product provides finish that is resistant to chemicals, oil, grease, de-icing salts, and abrasion. It meets max VOC content limits of 200 g/L for sealers as well as 400 g/L VOC max required by U.S....
Read More »
Water-Based Compound fights moisture loss.
EVAPRE(TM)-RTU evaporation retardant forms thin monomolecular film to reduce rapid moisture loss from concrete surfaces prior to curing. VOC-compliant product minimizes plastic shrinkage and cracking, wind crusting, stickiness, and sponginess, which can cause poor and uneven surface texture. EVAPRE-RTU combats effects of rapid drying conditions such as low humidity, low dew point, direct...
Read More »
Concrete Additive provides slip-resistant surfaces.
SURE-STEP(TM) finely ground polymer material is added to concrete sealers for slip resistance. In addition to providing chemical and abrasion resistance, material is more comfortable to bare feet than sand or aggregate additives. Due to low density, SURE-STEP stays suspended in thin materials. It is packaged in 3.2 and 16 oz containers.
Read More »
Liquid Sealing Compound protects decorative concrete.
Non-yellowing, acrylic-based DECRA-SEAL offers resistance to water, alkalis, mild acids, and petroleum spirits. Transparent product seals and protects decorative colored concrete by producing hard, yet flexible, clear film. DECRA-SEAL meets max VOC content limits of 700 g/L for concrete sealing compounds as required by U.S. EPA Architectural Coatings Rule. It is suited for driveways, patios,...
Read More »
Acrylic Compound cures and seals exterior concrete surfaces.
SEALTIGHTÃ-® CS-309-25 consists of clear, transparent, ready-to-apply, non-yellowing, liquid compound that cures and seals freshly placed concrete. It provides impermeable seal for optimum moisture retention and minimizes hair-checking as well as premature cracking, dusting, spalling, and other defects. Product also resists adhesion of mortar droppings. Applications include sidewalks, patios,...
Read More »
Compound densifies/hardens concrete surfaces.
SEALTIGHT LIQUI-HARDÃ-® Concrete Densifier and Chemical Hardener Compound consists of ready-to-use, colorless liquid that produces hardened, dust-proofed, and chemically resistant surfaces wherever it is applied. Through chemical reaction process, product penetrates through concrete, chemically solidifying all component parts into one homogenous concrete mass. It also eliminates dusting,...
Read More »
Underslab Vapor Barrier protects indoor environment.
Featuring polyolefin-based resin/chemical technology, PERMINATORÃ-® helps minimize penetration of moisture and water vapor through slab into structure, thereby helping to reduce fungus, mildew, and mold growth. Product also helps prevent radon gas from entering structure. Available in 10 and 15 mil thicknesses in 200 ft long rolls, PERMINATOR helps meet and maintain maximum slab moisture...
Read More »
Expansion Joint Filler features Green design.
Composed of 100% recycled synthetic rubber, ECO-JOINT is flexible, chemical-resistant, and UV-stable. It is compatible with most hot and cold joint sealants and will not deform, twist, or break with normal handling. Suited for both interior and exterior environments, ECO-JOINT acts as bond breaker and contains no asphalt. Applications include roadways, airport runways, sidewalks, pavement patch...
Read More »Admixture reduces mortar and concrete freeze.
Recommended for use during cool and cold weather, HYDRASET-FREEÃ-® non-chloride concrete set accelerator speeds construction by shortening initial set and curing time. Workability and strength are obtained when temps are in 50-65Ã-
Read More »Roof Traffic Pads provide impact-absorbing walkway.
Providing designated safe area on which to walk, WHITEWALK roof traffic pads reflect heat and help assure safe footing. White granular surface provides obvious walkway for service routes to equipment, as well as traffic paths under and around signs and displays. WHITEWALK is compatible with fiberglass mesh, asphaltic coatings, asphalt-saturated felts, butyl rubber, neoprene, EPDM, and most PVC...
Read More »
Transparent Liquid Sealant protects decorative concrete.
Non-yellowing, polymer-based DECRA-SEAL(TM) W/B is formulated to seal and protect decorative colored concrete by producing hard, flexible, clear film. Used on any interior/exterior concrete surface, product provides finish that is resistant to chemicals, oil, grease, de-icing salts, and abrasion. It meets max VOC content limits of 200 g/L for sealers as well as 400 g/L VOC max required by U.S....
Read More »
Water-Based Compound fights moisture loss.
EVAPRE(TM)-RTU evaporation retardant forms thin monomolecular film to reduce rapid moisture loss from concrete surfaces prior to curing. VOC-compliant product minimizes plastic shrinkage and cracking, wind crusting, stickiness, and sponginess, which can cause poor and uneven surface texture. EVAPRE-RTU combats effects of rapid drying conditions such as low humidity, low dew point, direct...
Read More »
Concrete Additive provides slip-resistant surfaces.
SURE-STEP(TM) finely ground polymer material is added to concrete sealers for slip resistance. In addition to providing chemical and abrasion resistance, material is more comfortable to bare feet than sand or aggregate additives. Due to low density, SURE-STEP stays suspended in thin materials. It is packaged in 3.2 and 16 oz containers.
Read More »
Liquid Sealing Compound protects decorative concrete.
Non-yellowing, acrylic-based DECRA-SEAL offers resistance to water, alkalis, mild acids, and petroleum spirits. Transparent product seals and protects decorative colored concrete by producing hard, yet flexible, clear film. DECRA-SEAL meets max VOC content limits of 700 g/L for concrete sealing compounds as required by U.S. EPA Architectural Coatings Rule. It is suited for driveways, patios,...
Read More »
Acrylic Compound cures and seals exterior concrete surfaces.
SEALTIGHTÃ-® CS-309-25 consists of clear, transparent, ready-to-apply, non-yellowing, liquid compound that cures and seals freshly placed concrete. It provides impermeable seal for optimum moisture retention and minimizes hair-checking as well as premature cracking, dusting, spalling, and other defects. Product also resists adhesion of mortar droppings. Applications include sidewalks, patios,...
Read More »
Compound densifies/hardens concrete surfaces.
SEALTIGHT LIQUI-HARDÃ-® Concrete Densifier and Chemical Hardener Compound consists of ready-to-use, colorless liquid that produces hardened, dust-proofed, and chemically resistant surfaces wherever it is applied. Through chemical reaction process, product penetrates through concrete, chemically solidifying all component parts into one homogenous concrete mass. It also eliminates dusting,...
Read More »