Innovations in Optics, Inc.
Woburn, MA 01801
New 5000H Driver is Ideal for Powering High-Power LED Light Engines
Provides constant current in continuous or pulsed mode for LED arrays connected in parallel, single large format LED chips and laser diodes with a compliance voltage up to 7.0 VDC. Utilizes Modbus RS-485 serial protocol to support remote or automated operation. Offers I/O that includes analog intensity control and PWM 24VDC output for cooling fans mounted to an LED illuminator with...
Read More »
New Pattern Blazer LED Pattern Projector Uses C-Mount Machine Vision Lenses
Features four standard LED spectral options, blue (480 nm), red (660 nm) near-infrared (860 nm), and broadband white (4800K). Incorporates pinhole-free precision reticles patterned by photolithography to produce thinner lines, sharper edges, and more homogeneous illumination. Offers digital driver/controller that provides high DC current to the LED projector up to 40A continuous and 50A pulsed...
Read More »
LED Light Engines Help in The Battle Against COVID-19
Woburn, MA, July 28, 2020 - Innovations in Optics, Inc. offers high power LED Light Engines as fluorescent excitation illuminators for life science instruments. The company is deemed an essential supplier to several life science companies that manufacture equipment used to diagnose patients and study the virus. From Western blot imaging and real-time PCR to fluorescence microscopy, our LumiBright...
Read More »
New Model 6000B-100 LED Solar Simulator Meets IEC 60904-9 Class AAA Requirements
Includes digital driver/controller with RS-485 MODBUS RTU protocol and provide feedback monitoring to stabilize source irradiance. Offers 50 x 50 mm. field of illumination at a working distance of 155 mm. and ideal for PV manufacturers. Consumes 15W of input power to produce 1 Sun of irradiance and simplifies any thermal interface or active cooling scheme.
Read More »
New UV-LED Light Engine Features UV LED Die Arrays
Model 2990B-100 provides uniform irradiance field of 50 mm x 50 mm with a flux density up to 500 mW/cm2 with active cooling. Used alone or placed in tiled arrays to provide large area coverage. Available with UV LED wavelengths centered near 365 nm, 385 nm and 405 nm.
Read More »
New LumiBright UV-LED Light Engines Features UV Die Arrays Bonded on MCPCB Substrates
Model 2400B-405 and 2400B-505 are available with wavelengths centered near 365, 385, 395 and 405 nm. For spot curing applications, engines are coupled to liquid light guides for the ultraviolet. Offer economic advantages such as energy efficient, smaller in size and operating with consistent emission for very long lifetimes also provides ecological benefits such as mercury-free, generate no ozone...
Read More »
3300P-100 TIR Prism Assembly supports telecentric optical system.
3300P-100 TIR Prism Assembly offers a perpendicular projection axis to DLP chips for preventing spatial non-uniformities in projected brightness. The system is mounted to LumiBright™ 3300B series for 3D printing, computer-to-screen, computer-to-plate printing applications. The assembly provides uniform incidence angles for creating uniform black levels for dark field across the DLP chips....
Read More »
Solid-State Light Source Driver/Controller provides repetition rate of 15 KHz.
Suitable for LED lighting for machine vision, CCTV security and surveillance applications, 5500 A Solid-State Light Source Driver/Controller offers selectable drive current from 0 to 3 A per channel with 10-bit resolution at 6.0 VDC compliance voltage. Capable of monitoring temperature sensor and photosensor input, driver provides constant current in pulsed mode with
Read More »
Innovations in Optics, Inc. joins Texas Instruments Design Network - Offering LumiBright™ UV-LED Illuminators for TI DLP® Technology
Woburn, MA, January 20, 2017 - LumiBright 3300B UV-LED Illuminators are an extremely high power, highly uniform UV-LED solution providing unprecedented speed and resolution for UV DLP applications such as 3D printing, computer-to-screen and computer-to-plate printing and maskless lithography. Two models have been developed for DLP chipsets. The 20 watt illuminator is designed for the DLP7000...
Read More »
LED Solar Simulator supports testing of photovoltaic devices.
Achieving spatially uniform illumination field from chip-on-board, multiple-wavelength LED die array, LumiSun-50™ meets Class AAA solar simulator requirements of IEC 60904-9 for spectral match, uniformity of irradiance, and temporal stability. Field of illumination is 50 x 50 mm at working distance of 200 mm. LumiSun-50 includes driver/controller which individually provides constant current to...
Read More »Innovations in Optics, Inc. Hires Laser Industry Veteran David C. Clark as New Vice President of Sales & Marketing to Guide Its Rapid Growth
Woburn, MA, December 5, 2020— Innovations in Optics, Inc. (IOI) is pleased to announce the addition of Dave Clark as Vice President of Sales & Marketing. Dave will report directly to the CEO, Thomas Brukilacchio. Dave brings over 30 years of executive level experience in sales and marketing of photonics, optics, and laser-based products into micro-electronics, medical, bioinstrumentation,...
Read More »
New 5000H Driver is Ideal for Powering High-Power LED Light Engines
Provides constant current in continuous or pulsed mode for LED arrays connected in parallel, single large format LED chips and laser diodes with a compliance voltage up to 7.0 VDC. Utilizes Modbus RS-485 serial protocol to support remote or automated operation. Offers I/O that includes analog intensity control and PWM 24VDC output for cooling fans mounted to an LED illuminator with...
Read More »
New Pattern Blazer LED Pattern Projector Uses C-Mount Machine Vision Lenses
Features four standard LED spectral options, blue (480 nm), red (660 nm) near-infrared (860 nm), and broadband white (4800K). Incorporates pinhole-free precision reticles patterned by photolithography to produce thinner lines, sharper edges, and more homogeneous illumination. Offers digital driver/controller that provides high DC current to the LED projector up to 40A continuous and 50A pulsed...
Read More »
LED Light Engines Help in The Battle Against COVID-19
Woburn, MA, July 28, 2020 - Innovations in Optics, Inc. offers high power LED Light Engines as fluorescent excitation illuminators for life science instruments. The company is deemed an essential supplier to several life science companies that manufacture equipment used to diagnose patients and study the virus. From Western blot imaging and real-time PCR to fluorescence microscopy, our LumiBright...
Read More »Innovations in Optics, Inc. Hires a Customer Success Engineer
Woburn, MA, June, 22, 2020— Innovations in Optics, Inc. (IOI) is pleased to announce the addition of Karen Allardyce as Customer Success Engineer. Karen will report directly to the VP of Business Development, Kevin Carr. Karen brings a wealth of knowledge and experience in applications for optics. She earned a B.S. and M.S. in Optics with Thesis from the University of Rochester followed by...
Read More »Innovations in Optics, Inc. Announces Facility Expansion to Accommodate Accelerated Growth
Woburn, MA, April 17, 2020 - Following several years of exceptional growth, Innovations in Optics, Inc. is proud to announce plans to move into a new, larger facility at 10K Gill Street in Woburn, MA. The new location is nearly three times larger than the current facility, which will provide much-needed flex space for offices, laboratories and manufacturing cells to accommodate continued...
Read More »
New Model 6000B-100 LED Solar Simulator Meets IEC 60904-9 Class AAA Requirements
Includes digital driver/controller with RS-485 MODBUS RTU protocol and provide feedback monitoring to stabilize source irradiance. Offers 50 x 50 mm. field of illumination at a working distance of 155 mm. and ideal for PV manufacturers. Consumes 15W of input power to produce 1 Sun of irradiance and simplifies any thermal interface or active cooling scheme.
Read More »
New UV-LED Light Engine Features UV LED Die Arrays
Model 2990B-100 provides uniform irradiance field of 50 mm x 50 mm with a flux density up to 500 mW/cm2 with active cooling. Used alone or placed in tiled arrays to provide large area coverage. Available with UV LED wavelengths centered near 365 nm, 385 nm and 405 nm.
Read More »Innovations in Optics, Inc. Acquires New Automatic Die Bonder to Keep Up with Rapid Growth
Woburn, MA, August 19, 2019— In our continued strategic pursuit of excellence and improvement, Innovations in Optics, Inc. has purchased a new F&S BONDTEC Model 5830 automatic wire bonder to produce Chip-on-Board die arrays used in the company’s high-power UV LED light sources. This new addition will not only expand capacity, but also enhance capabilities. The machine will increase efficiency...
Read More »Innovations in Optics, Inc. Hires New Operations Director to Guide Its Rapid Growth
Woburn, MA, July 1, 2019— Innovations in Optics, Inc. (IOI) is pleased to announce the addition of Dennis Donahue as Director of Manufacturing Operations. Dennis will report directly to the CEO, Thomas Brukilacchio. Dennis bring over 20 years of executive level Operations experience in the development and manufacture of complex products for the medical, biotech, aerospace, optical and...
Read More »