AutomationDirect
Cumming, GA 30040-5860
Open-Loop Stepping System controls position and speed.
SureStep(TM) includes 4 motors and one-size-fits-all step motor drive. With holding torques from 83-434 oz-in. in NEMA size 17, 23, or 34 frames, motors operate from 2.8 A/phase. Two-phase, bipolar motors have 200 full steps/revolution or 1.8Ã-
Read More »
Circuit Breakers offer UL489 listed performance.
Providing branch circuit overcurrent protection, Molded Case Circuit Breakers use patented contact conductor designs featuring high-speed blow-open action. They include arc extinguishing technology and toggle handle that provides on/off/tripped positions along with visual indicators. Flex and standard shaft handles are available to facilitate installation and operation of enclosure-mounted...
Read More »
Wiring Duct comes in rigid and flexible models.
PVC Wiring Duct, with non-slip flush cover, mounts directly onto mounting rail or internal mounting plate. Two predetermined break lines allow breaking off and removal of sidewall finger segments and base segments. Rigid duct is available in .5 x .625 to 6 x 4 in. gray or white models. Suited for extreme operating conditions up to 176Ã-
Read More »
AC Drives offer sensorless vector and closed-loop control.
DURApulse series AC drives are available in 1-100 hp models and feature auto tuning, 175% starting torque, and 150% rated current for 1 minute. Automatic torque, slip compensation, and internal dynamic braking circuit are offered on models under 20 hp. Drives provide 3 analog inputs, 16 preset speeds, 11 programmable digital inputs, 4 programmable outputs, and 1 analog output. PWM output is...
Read More »
Industrial Relays include LED and flag indicators.
Solid-state relays are available in 10 or 25 A DIN-rail mounted or 4 A plug-in models. DIN-rail models have integral heat sink and red LED status lamp for viewing contact status. Offered in 24 Vac/dc, 120 Vac, and 240 Vac models, octal relays feature bus connector that allows coil and contactor voltage to be tied together with bus bar. Cube relays come in 24, 120, and 240 Vac and 24 Vdc models...
Read More »
Circuit Protectors guard against short circuit and overload.
Series WMS thermal-magnetic devices are UL1077 recognized for applications where branch circuit protection is not required or is already provided. DIN-rail mounted units come in 1- and 3-pole configurations. B-curve models trip at 3-5 times rated current for low-inrush type loads, while D-curve models trip at 10-20 times rated current for high-inrush inductive loads. Shunt trips are available for...
Read More »
Signal Conditioners provide 3-way isolation up to 1,500 V.
DIN-rail-mounted Series FC protects electronic equipment from electrical noise. Model FC-11 is a loop-powered signal conditioner/isolator for 4-20 mA signals. DC-powered Model FC-33 is a selectable signal conditioner/isolator for voltage/current signals with programmable ranges and LED indicators. Model FC-T1 offers conditioning, isolation, and cold-junction compensation for thermocouple/mV input...
Read More »
Output Modules work with incremental encoders.
Counter/Pulse Output Modules accept high-speed pulse-type input signals and provide discrete outputs or pulse output for position control, speed referencing, or other motion control functions. They feature 8 DC sink/source inputs at 9-30 Vdc, and 4 isolated sink/source DC outputs at 5-30 Vdc. Input configurations supported include 2 quadrature encoder counters up to 100 kHz, or 4 single channel...
Read More »
Modules network nano and micro PLCs.
HO-ECOM Ethernet Communications Module provides 10 Mbit Ethernet link for PLC systems and can be used for peer-to-peer PLC communication between two or more DirectLOGIC DL05/DL06 PLCs or between PLCs and PCs. D0-DEVNETS DeviceNet Slave Module, transforms any DL05 or DL06 into smart node on DeviceNet controller network. H0-PSCM Slave Communication Module allows any DL05 or DL06 to be networked to...
Read More »
Relays are DIN-rail mountable.
Industrial Relays, available in 24 Vdc, 120 Vac, and 240 Vac coil voltage, feature bifurcated contacts for low-current switching capability. Sockets include holding clips to secure relays and protect against accidental relay disengagement. LED indicators facilitate troubleshooting. Some relay models include internal surge protection diode to protect against voltage surges.
Read More »