AutomationDirect
Cumming, GA 30040-5860
New DN-FE-16T Self-Adjusting Rotatable Die Crimping Tools are Lightweight, Compact and Comfortable for Crimping
Self-adjusting crimpers for use with insulated and non-insulated wire ferrules in sizes from 26 to 8 AWG. Crimp head is rotatable to accommodate crimping from the side or from the front. Features controlled-cycle ratchet action (with emergency release) to ensure crimps are completed according to specification every time.
Read More »
Surestep IP65 Rated High-torque Stepping Motors Use 2-Phase Technology with 200 Full Steps per Revolution or 1.8 Degrees per Full Step
Protected from solids and dust ingress and from low-pressure water jets from any direction, making them suitable for many washdown applications. Fully sealed, single-shaft motors are available with industry-standard NEMA 17, 23 and 34 mounting flanges. Available in single-shaft configurations and have a 1-ft. cable and locking connector.
Read More »
AutomationDirect Introduces SOLO Basic Temperature Controllers to Provide Single Loop Control for Heating and Cooling Processes
UL, CUL and CE approved controllers have two 4-character 7-segment LED display to indicate process value (PV) and setpoint value (SV); red for PV and green for SV. IP66 rated for dust and water jet ingress protection (inside suitable enclosure) and have a 0°C to 50°C operating temperature range. Accept 11 types of thermocouples, 4 types of RTD temperature sensors and support three control...
Read More »
New ProSense DGA Differential Pressure Gauges are Designed for Use with Air and Compatible Non-Combustible Gases
Offered in industrial grade black die-cast aluminum case with four connection ports and a 100 mm white aluminum dial with black pressure markings. Available in pressure ranges up to 150 in. water column and zero-center ranges from ± 1 to ±15 in. WC. Features an ambient temperature tolerance of -40°F to 140°F and are used for measuring and displaying difference in air pressure between two...
Read More »
AutomationDirect Introduces DW Series Proximity Sensors in 4mm, 5mm, 8mm and 12mm Diameter
IP67 rated sensors offers a lifetime warranty and are CE compliant as well as cULus approved. 8mm and 12mm diameter sensors are available with quadruple sensing ranges. 8mm M8 sensor and 12mm M12 sensor have 4mm and 8mm (shielded) sensing distance respectively.
Read More »
AutomationDirect Introduces 325 Frame Size IronHorse Cast Iron Worm Gearboxes Available In Ratios of 10:1, 15:1, 20:1, 30:1, 40:1 & 60:1
3.25” input to output shaft distance gearboxes with outputs in left hand shaft, right hand shaft, dual shaft and hollow shaft. Designed to change drive direction by 90 degrees, drive a load at a reduced fixed ratio of the motor speed and increase output torque by the same ratio. Gearbox C-face interface matches NEMA 56C, 145TC and 182/4TC motor frame sizes.
Read More »
AutomationDirect Presents NITRA GVP Series Pneumatic Miniature Solenoid Valves
GVP series 12 or 24 VDC solenoid valves are available in 10mm and 15mm valve widths. Available in 2-way or 3-way normally closed configurations and used for on/off flow control or with single-acting cylinders. Can be used in automation applications with low flow requirements.
Read More »
AutomationDirect Introduces Type SOOW and Type SEOOW Flexible Cord with 5 Conductors
Used for electrical power connections requiring flexibility in indoor and outdoor wiring applications, also it is rated at 600 VAC and are available in 18 to 10 AWG. Resistant to melting on momentary contact with a hot surface is best for abrasion resistance and offers a lower cost is only applicable to Type SOOW and is best for abrasion resistance is a seperate idea. Required in applications...
Read More »
AutomationDirect Offers RHINO PSV Series Power Supplies in Plastic and Metal Housings
RHINO PSV Series DIN Rail Power Supplies are available in 5 V (15 and 25 W) and 24 V DC (30, 50, 100, 120, 240 and 480 W). The units (15 to 100W models) can be operated in −10°C to +55°C temperature range and are certified to NEC Class 2 / Limited Power Source standards. The 120 to 480 W power supplies offer −10°C to +50°C and come with built-in constant current circuit. The devices are...
Read More »
AutomationDirect Offers Pushbutton Legend Plates That are Approved to CE Standards
The AutomationDirect presents metal and plastic legend plates for 22 mm pushbutton devices that are available in 30 x 45 mm (W x H) and at 40 x 45 mm (W x H) sizes. The aluminum legend plates feature black or red filed with silver background whereas the plastic plates come with white engraved text on black or red background.
Read More »
New DN-FE-16T Self-Adjusting Rotatable Die Crimping Tools are Lightweight, Compact and Comfortable for Crimping
Self-adjusting crimpers for use with insulated and non-insulated wire ferrules in sizes from 26 to 8 AWG. Crimp head is rotatable to accommodate crimping from the side or from the front. Features controlled-cycle ratchet action (with emergency release) to ensure crimps are completed according to specification every time.
Read More »AutomationDirect adds AcuAMP Solid Core AC Current Transformers
AcuAMP® Solid Core current transformers from AutomationDirect are instrumentation grade (commercial class) and provide a very cost-effective means of measuring primary current. Two different window openings and two mounting styles along with numerous secondary ratios are available to meet most applications. Available in primary current ranges up to 1000A, the AC transformers are compact,...
Read More »
Surestep IP65 Rated High-torque Stepping Motors Use 2-Phase Technology with 200 Full Steps per Revolution or 1.8 Degrees per Full Step
Protected from solids and dust ingress and from low-pressure water jets from any direction, making them suitable for many washdown applications. Fully sealed, single-shaft motors are available with industry-standard NEMA 17, 23 and 34 mounting flanges. Available in single-shaft configurations and have a 1-ft. cable and locking connector.
Read More »
AutomationDirect Introduces SOLO Basic Temperature Controllers to Provide Single Loop Control for Heating and Cooling Processes
UL, CUL and CE approved controllers have two 4-character 7-segment LED display to indicate process value (PV) and setpoint value (SV); red for PV and green for SV. IP66 rated for dust and water jet ingress protection (inside suitable enclosure) and have a 0°C to 50°C operating temperature range. Accept 11 types of thermocouples, 4 types of RTD temperature sensors and support three control...
Read More »
New ProSense DGA Differential Pressure Gauges are Designed for Use with Air and Compatible Non-Combustible Gases
Offered in industrial grade black die-cast aluminum case with four connection ports and a 100 mm white aluminum dial with black pressure markings. Available in pressure ranges up to 150 in. water column and zero-center ranges from ± 1 to ±15 in. WC. Features an ambient temperature tolerance of -40°F to 140°F and are used for measuring and displaying difference in air pressure between two...
Read More »
AutomationDirect Introduces DW Series Proximity Sensors in 4mm, 5mm, 8mm and 12mm Diameter
IP67 rated sensors offers a lifetime warranty and are CE compliant as well as cULus approved. 8mm and 12mm diameter sensors are available with quadruple sensing ranges. 8mm M8 sensor and 12mm M12 sensor have 4mm and 8mm (shielded) sensing distance respectively.
Read More »
AutomationDirect Introduces 325 Frame Size IronHorse Cast Iron Worm Gearboxes Available In Ratios of 10:1, 15:1, 20:1, 30:1, 40:1 & 60:1
3.25” input to output shaft distance gearboxes with outputs in left hand shaft, right hand shaft, dual shaft and hollow shaft. Designed to change drive direction by 90 degrees, drive a load at a reduced fixed ratio of the motor speed and increase output torque by the same ratio. Gearbox C-face interface matches NEMA 56C, 145TC and 182/4TC motor frame sizes.
Read More »
AutomationDirect Presents NITRA GVP Series Pneumatic Miniature Solenoid Valves
GVP series 12 or 24 VDC solenoid valves are available in 10mm and 15mm valve widths. Available in 2-way or 3-way normally closed configurations and used for on/off flow control or with single-acting cylinders. Can be used in automation applications with low flow requirements.
Read More »
AutomationDirect Introduces Type SOOW and Type SEOOW Flexible Cord with 5 Conductors
Used for electrical power connections requiring flexibility in indoor and outdoor wiring applications, also it is rated at 600 VAC and are available in 18 to 10 AWG. Resistant to melting on momentary contact with a hot surface is best for abrasion resistance and offers a lower cost is only applicable to Type SOOW and is best for abrasion resistance is a seperate idea. Required in applications...
Read More »
AutomationDirect Offers RHINO PSV Series Power Supplies in Plastic and Metal Housings
RHINO PSV Series DIN Rail Power Supplies are available in 5 V (15 and 25 W) and 24 V DC (30, 50, 100, 120, 240 and 480 W). The units (15 to 100W models) can be operated in −10°C to +55°C temperature range and are certified to NEC Class 2 / Limited Power Source standards. The 120 to 480 W power supplies offer −10°C to +50°C and come with built-in constant current circuit. The devices are...
Read More »
